Guideline - Fire resistance upgrade of cultural heritage doors
Research report
Published version
Permanent lenke
https://hdl.handle.net/11250/3016176Utgivelsesdato
2022Metadata
Vis full innførselSamlinger
- Publikasjoner fra CRIStin - SINTEF AS [5970]
- Rapporter fra SINTEF Community [795]
- SINTEF Community [2305]
Sammendrag
Older wooden doors can be one of the weaker points with regards to fire resistance in apartment buildings. This guideline proposes how glass, protective boards, sealing lists, hardware and door frames can be mounted to the door to be expected to achieve a fire resistance of approximately 30 minutes (as if the door would be fire resistance tested). The only intended use of this guideline is when changing the door due to antiquarian reasons is not possible or desirable.
These types of older doors typically have a thickness of 40-50 mm, with glass on the upper part and a thinner wooden door panel on the lower part. For antiquary reasons, the interventions on the doors should be as little intrusive and as reversible as possible.
A total number of four fire tests were performed, with two small door models in each test. Different solutions for mounting of fire resistant glass, gypsum boards and glazing lists were tested. The main conclusions from the fire tests are:
Glass must have a minimum fire resistance rating of 30 minutes (integrity and insulation) and be securely fastened with steel frames or steel angles
Thinner parts like fielded wooden panels can be upgraded with stone wool and 12.5 mm robust gypsum boards
Both intumescent strips and silicone gaskets must be mounted around the door leaf The gap between the door frame and the wall must be sealed using stone wool and fire sealant