Multi-objective parametric study of a wooden window
Conference object, Journal article, Peer reviewed
MetadataVis full innførsel
The aim of this study is to conduct a multi-objective parametric study by simultaneously analysing the thermal and structural performance of a wood-frame window. The finite element simulation program COMSOL is used to carry out the thermal and structural analysis. A global sensitivity analysis is performed to screen and rank the dominant parameters. Afterwards, a parametric analysis is performed by varying the dominant parameters. The results demonstrate that the performance of the frame configuration of the wooden window can be improved from the nominal configuration. The results suggest that the methodology can be further improved by conducting form-finding and typology-based optimization studies while accounting further for the impact of the window on the energy use for heating in buildings
TidsskriftMATEC Web of Conferences
OpphavsrettThis is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Viser innførsler beslektet ved tittel, forfatter og emneord.
Rygg, Atle; Amin, Mohammad; Molinas Cabrera, Maria Marta; Gustavsen, Bjørn Alfred (IEEE Workshop on Control and Modeling for Power Electronics, COMPEL;2016, Chapter, 2016)In this paper a new method for power system stability analysis is introduced. The method is based on injection of a small voltage or current in an arbitrary point of the system. The apparent impedance is defined as the ...
Houlihan Wiberg, Aoife Anne Marie; Georges, Laurent; Fufa, Selamawit Mamo; Risholt, Birgit Dagrun; Good, Clara Stina (ZEB Project report;21, Research report, 2015)
Numerical analysis of the temperature distribution in a martensic stainless steel strip during hardening Pirouznia, Pouyan; Andersson, Nils Å.I.; Tilliander, Anders; Jönsson, Pär G. (SINTEF Proceedings;2, Chapter; Conference object; Peer reviewed, 2017)Due to the increasing demands on higher qualities of thin martensitic steel strips, a great attention needs to be paid to the dimension quality of the finished product within the hardening line. The temperature distribution ...