Browsing SINTEF Industri by Title
Now showing items 939-958 of 1542
-
Modelling of major phases formation during solidification of Ferro-Silicon-Magnesium
(Peer reviewed; Journal article, 2023)Ductile cast iron, also known as nodular cast iron, is a graphite-rich cast iron with high impact and fatigue resistance, due to its nodular graphite inclusions. Ductile cast iron is produced by incorporating additives ... -
Modelling of the Ferrosilicon furnace: effect of boundary conditions and burst
(SINTEF Proceedings;1, Chapter; Conference object; Peer reviewed, 2015)A by-product from the ferrosilicon process is process gas which escapes into the furnace hood were it reacts with air. The process gas mainly consists of CO with some SiO and moisture. Modeling the gas behavior inside the ... -
Modelling of the wall film in high-rate low liquid loading flows
(International Conference on Multiphase Technology;2019, Chapter; Peer reviewed, 2019)In this paper we present a detailed analysis of large scale experimental data from the SINTEF Multiphase Laboratory on high-rate low liquid loading flows. The experimental work [1] was funded by Equinor as part of the ... -
Modelling the Age-Hardening Precipitation by a Revised Langer and Schwartz Approach with Log-Normal Size Distribution
(Peer reviewed; Journal article, 2020)A new numerical modelling approach integrating the Langer and Schwartz approach and log-normal particle size distribution has been developed to depict the precipitation kinetics of age-hardening precipitates in Al alloys. ... -
Modelling the Spatial Evolution of Excess Vacancies and its Influence on Age Hardening Behaviors in Multicomponent Aluminium Alloys
(Peer reviewed; Journal article, 2023)Excess vacancies play crucial roles in the precipitation of age-hardening precipitates in aluminium alloys, but their spatial evolution across grains during heat treatments is less known. In this work, a numerical model ... -
Modern numerical methods and their applications in mechanical engineering
(Journal article, 2019) -
Modified Dolomite-Based Pellets for High Temperature Post-Combustion Co2 Capture
(SINTEF Proceedings;7, Chapter; Peer reviewed; Conference object, 2021)In this study, synthetic dolomite-based pellets were prepared by means of one-pot method. Zr and Ce were used as modifier and aluminate cement was employed as binder. The addition of the promoters by two different routes ... -
Modified embedded atom method potential for Fe-Al intermetallics mechanical strength: A comparative analysis of atomistic simulations
(Peer reviewed; Journal article, 2021)The structural and mechanical properties of Fe-Al compounds (FeAl, Fe2Al, Fe3Al, FeAl2, FeAl3, Fe2Al5) have been studied using modified embedded atom method (MEAM) potentials. The equilibrium lattice constants, formation ... -
Modified Pechini Synthesis of Oxide Powders and Thin Films
(Chapter, 2016)The modified Pechini method has become one of the most popular synthesis methods for complex oxide materials due to its simplicity and versatility. The method can be applied to synthesize nanocrystalline powders, bulk ... -
Molecular Dynamics Simulation for Structural Evolution of Mixed Ash from Coal and Wheat Straw
(Peer reviewed; Journal article, 2022)We conducted molecular dynamics (MD) simulations to investigate the structural evolution of molten slag composed of wheat straw (WS) and Shenhua (SH) coal. The content of wheat straw in the slag was varied from 0 to 100 ... -
Molecular Dynamics Simulation of Heat Transfer at Contact Interface of Hot Forming Die
(Peer reviewed; Journal article, 2019) -
Molecular-dynamics simulations of the emergence of surface roughness in a polymer under compression
(Peer reviewed; Journal article, 2021)Roughness of surfaces is both surprisingly ubiquitous on all length scales and extremely relevant practically. The appearance of multi-scale roughness has been linked to avalanches and plastic deformation in metals. However, ... -
Monitoring and modelling of influent patterns, phase distribution and removal of 20 elements in two primary wastewater treatment plants in Norway
(Journal article; Peer reviewed, 2020-07-10)Many small- or medium-sized communities in Northern Europe employ only primary wastewater treatment plants (WWTPs) and effluent discharges can be a relevant source of pollution. The current study combines monitoring and ... -
Monitoring of Co2 Well Plug Integrity. Electrical Response of Cement/CNF Sensor to Mechanical Load, Water Saturation and Carbonation
(SINTEF Proceedings;7, Chapter; Peer reviewed; Conference object, 2021)CO2 storage wells will eventually need to be permanently plugged and abandoned. Subsidence, fault/fracture reactivation or chemical degradation can all adversely affect well plug integrity leading to CO2 leakages. Thus, ... -
Monitoring of Erosion in a Pneumatic Conveying System by Non-intrusive Acoustic Sensors – A Feasibility Study
(Peer reviewed; Journal article, 2019)This paper presents the results of a study where the feasibility of a non-invasive acoustic measurement method was tested for monitoring of erosion in a pneumatic conveying system during the ... -
Monitoring of scale formation in a pneumatic conveying system operating in a metal production plant
(Journal article; Peer reviewed, 2019)Monitoring of scale progression in a pneumatic conveying system operating in a metal production plant was conducted during a five-month long monitoring period. A combination of an acoustic monitoring method and a laser ... -
Morphology, crystalline features, and tensile properties of syndiotactic polypropylene blends
(Peer reviewed; Journal article, 2017)Syndiotactic polypropylene (sPP) was modified with ethylene–octene copolymer (EOC) and ethylene–propylene rubber (EPR), with test samples prepared in a twin-screw extruder and then injection-molded. The phase morphology, ... -
Muligheter for økt verdiskaping gjennom samarbeid mellom havbruks-, jord- og skognæringene i Trøndelag: Identifisering av samarbeidsområder, kunnskapsbehov, råstoffer og forslag til tiltak.
(SINTEF Rapport;2020:00699, Research report, 2020)Denne rapporten gir en oppsummering av mulige og lovende tiltak for økt verdiskaping innen bioøkonomien i Trøndelag på tvers av de tre hovednæringene jord-, skog- og havbruk i Trøndelag. Vi slår fast at volum-tilgangen på ... -
Multi-component analysis of monethanolamine solvent samples by FTIR
(Journal article; Peer reviewed, 2019)Partial least square regression (PLS-R) methodology have been applied on dataset containing FTIR spectra and densities for a large set of MEA solvent samples. The prediction capabilities for the major compounds were tested ... -
Multi-modal characterization of vasculature and nanoparticle accumulation in five tumor xenograft models
(Peer reviewed; Journal article, 2018)Preclinical research has demonstrated that nanoparticles and macromolecules can accumulate in solid tumors due to the enhanced permeability and retention effect. However, drug loaded nanoparticles often fail to show increased ...