Blar i Publikasjoner fra CRIStin - SINTEF AS på tittel
Viser treff 1438-1457 av 5661
-
Effects of Lignin Gasification Impurities on the Growth and Product Distribution of Butyribacterium methylotrophicum during Syngas Fermentation
(Peer reviewed; Journal article, 2023)This work evaluated the effects of condensable syngas impurities on the cell viability and product distribution of Butyribacterium methylotrophicum in syngas fermentation. The condensates were collected during the gasification ... -
The Effects of Low Cu Additions and Predeformation on the Precipitation in a 6060 Al-Mg-Si Alloy
(Peer reviewed; Journal article, 2013)Effects of low Cu additions (≤0.10 wt pct) and 10 pct predeformation before aging on precipitates’ microstructures and types in a 6060 Al-Mg-Si alloy have been investigated using transmission electron microscopy (TEM). It ... -
Effects of metal dusting relevant exposures of alloy 601 surfaces on carbon formation and oxide development
(Peer reviewed; Journal article, 2020)Ni and Fe are excellent catalysts for carbon formation, and industrial alloys are therefore susceptible to metal dusting corrosion; a costly issue in e.g. synthesis gas manufacture. The objective of this work is to better ... -
Effects of powder properties on the 3D printing of BaTiO3 ceramic resins by stereolithography
(Peer reviewed; Journal article, 2023)Stereolithography is a layer-by-layer building fabrication technique enabling production of advanced ceramic 3D shapes that are not achievable by other methods. Critical parameters of stereolithography are associated with ... -
Effects of prior experience, gender, and age on trust in a banking chatbot with(out) breakdown and repair
(Chapter, 2023)Trust is an attitudinal construct that can be sensitive to prior experience, gender, and age. In our study, we explored how trust in a banking chatbot might be shaped by these user characteristics. Statistical analysis of ... -
The effects of quench rate and pre-deformation on precipitation hardening in Al–Mg–Si alloys with different Cu amounts
(Peer reviewed; Journal article, 2014)The effects of quench rate after solution heat treatment in combination with 1% pre-deformation on precipitation hardening in three Al–Mg–Si alloys have been investigated by transmission electron microscopy and hardness ... -
Effects of reduced organic matter loading through membrane filtration on the microbial community dynamics in recirculating aquaculture systems (RAS) with Atlantic salmon parr (Salmo salar)
(Peer reviewed; Journal article, 2020)A key challenge in recirculating aquaculture systems (RAS) is the accumulation of particulate organic matter, especially the fine and colloidal fraction due to low removal efficiency of today's technology. The supply of ... -
Effects of soil heterogeneity on susceptibility of shallow landslides
(Peer reviewed; Journal article, 2021)Uncertainties in parameters of landslide susceptibility models often hinder them from providing accurate spatial and temporal predictions of landslide occurrences. Substantial contribution to the uncertainties in landslide ... -
Effects of substrate annealing on the gold-catalyzed growth of ZnO nanostructures
(Journal article; Peer reviewed, 2011)The effects of thermal substrate pretreatment on the growth of Au-catalyzed ZnO nanostructures by pulsed laser deposition are investigated. C-plane sapphire substrates are annealed prior to deposition of a thin Au layer. ... -
Effects of sulphur on a Co/Mn-based catalyst for Fischer-Tropsch reactions
(Peer reviewed; Journal article, 2018)The long term effect of up to 10 ppm H2S was studied for Fischer–Tropsch conversion of syngas by catalytic testing at 240 °C, 5 bar, H2/CO = 2.1 and GHSV = 2400 Nml/gcat h. Sulphur was dosed after ~ 300 or ~ 1000 h time ... -
Effects of Water Content and Temperature on Bulk Resistivity of Hybrid Cement/Carbon Nanofiber Composites
(Peer reviewed; Journal article, 2020)Cement nanocomposites with carbon nanofibers (CNFs) are electrically conductive and sensitive to mechanical loads. These features make them useful for sensing applications. The conductive and load sensing properties are ... -
Effekt av brukermedvirkning i institusjoner for barn og unge. Systematisk litteratursøk med sortering
(Research report, 2016)Seksjon for velferdstjenester ved Kunnskapssenteret fikk i september 2015 i oppdrag av Barne‐, ungdoms‐ og familiedirektoratet å identifisere forskning om effekt av bru‐ kermedvirkning i institusjoner for barn og unge ... -
Effekt av Magnesiumklorid på Betongbestandighet
(Statens vegvesens rapport;652, Research report, 2016)Bruk av salt til is- og snøsmelting er en viktig del av dagens vinterdrift på vei og bruer. I dag er det i hovedsak NaCl som er i bruk. Det er velkjent at MgCl2 er i tillegg til andre positive egenskaper mer effektiv til ... -
Effekt av trygghetspakker : Erfaringer fra velferdsteknologiprosjekter i Lister regionen
(SINTEF Rapport;, Research report, 2016)Lister-kommunene, Farsund, Flekkefjord, Hægebostad, Kvinesdal, Lyngdal og Sirdal, har pilotert ulike trygghetsteknologier som en del av oppdraget i Nasjonalt velferdsteknologi- program. I Lister er bruk av velferdsteknologi ... -
Effekter av teknologiske endringer på norsk nærings- og arbeidsliv
(, Research report, 2015)Denne rapporten gir en bred tilnærming til hvordan teknologiske endringer/ nyvinninger bidrar til å endre digitale og fysiske produksjonsprosesser for varer og tjenester, samt en analyse av hvordan dette påvirker norsk ... -
Efficacy of a novel sequential enzymatic hydrolysis of lignocellulosic biomass and inhibition characteristics of monosugars
(Peer reviewed; Journal article, 2019)Efficient production of sugar monomers from lignocellulose is often hampered by serious bottle-necks in biomass hydrolysis. The present study reveals that ultra-sonication assisted pretreatment following autoclaving, termed ... -
Efficiency Improvement of Chemical Looping Combustion Combined Cycle Power Plants
(Journal article; Peer reviewed, 2019)Chemical‐looping combustion (CLC) is an innovative technology for power production with inherent carbon dioxide (CO2) capture. Even though CLC imposes no direct energy penalty for CO2 capture, previous works have shown ... -
Efficiency of BIPV system – Field study in Norwegian climate
(1st Nordic conference on Zero Emission and Plus Energy Buildings, Conference object; Journal article; Peer reviewed, 2019)Use of solar cells (PV) and solar collectors are key remedies in buildings where a large part of the energy supply should be based on renewable energy. The aim of this work has been to evaluate calculated and measured solar ... -
Efficiency of ultrasound training simulators: Method for assessing image realism
(Journal article; Peer reviewed, 2010) -
Efficient adjoint-based well-placement optimization using flow diagnostics proxies
(Peer reviewed; Journal article, 2021)Model-based optimization of placement and trajectories of wells in petroleum reservoirs by the means of reservoir simulation forecasts is computationally demanding due to the high number of simulations typically required ...