Blar i Publikasjoner fra CRIStin - SINTEF AS på tittel
Viser treff 1428-1447 av 5647
-
Effects of Ga Substitution on the Local Structure of Na2Zn2TeO6
(Peer reviewed; Journal article, 2022)In the work presented here, we prepared Ga-substituted NZTO (Na2–xZn2–xGaxTeO6, x = 0.00, 0.05, 0.10, 0.15, 0.20) layered materials with a soft chemical, citric acid-based synthesis method and characterized these by means ... -
Effects of Germanium, Copper, and Silver Substitutions on Hardness and Microstructure in Lean Al-Mg-Si Alloys
(Peer reviewed; Journal article, 2015)It is shown that strength loss in a 6060 Al-Mg-Si alloy caused by reduction in solute can be compensated by adding back smaller quantities of Ag, Ge, and Cu. Nine alloys were investigated. Ge was found to be the most ... -
Effects of GP characteristics on unplanned hospital admissions and patient safety. A 9-year follow-up of all Norwegian out-of-hours contacts
(Peer reviewed; Journal article, 2021)Background: There are substantial differences in hospital referrals between general practitioners (GPs); however, there is little research on the consequences for patient safety and further healthcare use. Objective: ... -
Effects of humanlikeness and conversational breakdown on trust in chatbots for customer service
(Chapter, 2022)Trust in chatbots can be shaped by various factors such as humanlikeness in terms of visual appearance and conversational content, and conversational performance in terms of the chatbot’s ability to avoid conversational ... -
Effects of interconnections between timber floor elements: dynamic and static evaluations of structural scale tests
(Peer reviewed; Journal article, 2021)Long-span timber floor elements increase the flexibility of a building and exhibit a significant market potential. Timber floor elements are endeavouring to fulfil this potential, but building projects employing long-span ... -
Effects of iron precipitation and novel metal screw extrusion on electrical conductivity and properties of AA1370 aluminium
(Peer reviewed; Journal article, 2020)In order to develop well-performing aluminium electrical conductors, the role of iron and processing method on electrical and mechanical properties was studied for an AA1370 alloy. Firstly, Ø3 mm cold drawn wires were ... -
Effects of K adsorption on the CO-induced restructuring of Co(11-20)
(Journal article; Peer reviewed, 2018)The location of potassium (K) on Cobalt (Co) and its effect on adsorption and adsorption-induced surface restructuring is important for understanding the deactivation of Co Fischer-Tropsch catalysts and the nature of the ... -
Effects of La2O3 Addition into CaO-SiO2 Slag: Structural Evolution and Impurity Separation from Si-Sn Alloy
(Peer reviewed; Journal article, 2021)Boron (B) and phosphorus (P) are the most problematic impurities to be removed in the production of solar-grade silicon by the metallurgical process. In this work, the distribution of B and P between CaO-(La2O3)-SiO2 slags ... -
Effects of Lignin Gasification Impurities on the Growth and Product Distribution of Butyribacterium methylotrophicum during Syngas Fermentation
(Peer reviewed; Journal article, 2023)This work evaluated the effects of condensable syngas impurities on the cell viability and product distribution of Butyribacterium methylotrophicum in syngas fermentation. The condensates were collected during the gasification ... -
The Effects of Low Cu Additions and Predeformation on the Precipitation in a 6060 Al-Mg-Si Alloy
(Peer reviewed; Journal article, 2013)Effects of low Cu additions (≤0.10 wt pct) and 10 pct predeformation before aging on precipitates’ microstructures and types in a 6060 Al-Mg-Si alloy have been investigated using transmission electron microscopy (TEM). It ... -
Effects of metal dusting relevant exposures of alloy 601 surfaces on carbon formation and oxide development
(Peer reviewed; Journal article, 2020)Ni and Fe are excellent catalysts for carbon formation, and industrial alloys are therefore susceptible to metal dusting corrosion; a costly issue in e.g. synthesis gas manufacture. The objective of this work is to better ... -
Effects of powder properties on the 3D printing of BaTiO3 ceramic resins by stereolithography
(Peer reviewed; Journal article, 2023)Stereolithography is a layer-by-layer building fabrication technique enabling production of advanced ceramic 3D shapes that are not achievable by other methods. Critical parameters of stereolithography are associated with ... -
Effects of prior experience, gender, and age on trust in a banking chatbot with(out) breakdown and repair
(Chapter, 2023)Trust is an attitudinal construct that can be sensitive to prior experience, gender, and age. In our study, we explored how trust in a banking chatbot might be shaped by these user characteristics. Statistical analysis of ... -
The effects of quench rate and pre-deformation on precipitation hardening in Al–Mg–Si alloys with different Cu amounts
(Peer reviewed; Journal article, 2014)The effects of quench rate after solution heat treatment in combination with 1% pre-deformation on precipitation hardening in three Al–Mg–Si alloys have been investigated by transmission electron microscopy and hardness ... -
Effects of reduced organic matter loading through membrane filtration on the microbial community dynamics in recirculating aquaculture systems (RAS) with Atlantic salmon parr (Salmo salar)
(Peer reviewed; Journal article, 2020)A key challenge in recirculating aquaculture systems (RAS) is the accumulation of particulate organic matter, especially the fine and colloidal fraction due to low removal efficiency of today's technology. The supply of ... -
Effects of soil heterogeneity on susceptibility of shallow landslides
(Peer reviewed; Journal article, 2021)Uncertainties in parameters of landslide susceptibility models often hinder them from providing accurate spatial and temporal predictions of landslide occurrences. Substantial contribution to the uncertainties in landslide ... -
Effects of substrate annealing on the gold-catalyzed growth of ZnO nanostructures
(Journal article; Peer reviewed, 2011)The effects of thermal substrate pretreatment on the growth of Au-catalyzed ZnO nanostructures by pulsed laser deposition are investigated. C-plane sapphire substrates are annealed prior to deposition of a thin Au layer. ... -
Effects of sulphur on a Co/Mn-based catalyst for Fischer-Tropsch reactions
(Peer reviewed; Journal article, 2018)The long term effect of up to 10 ppm H2S was studied for Fischer–Tropsch conversion of syngas by catalytic testing at 240 °C, 5 bar, H2/CO = 2.1 and GHSV = 2400 Nml/gcat h. Sulphur was dosed after ~ 300 or ~ 1000 h time ... -
Effects of Water Content and Temperature on Bulk Resistivity of Hybrid Cement/Carbon Nanofiber Composites
(Peer reviewed; Journal article, 2020)Cement nanocomposites with carbon nanofibers (CNFs) are electrically conductive and sensitive to mechanical loads. These features make them useful for sensing applications. The conductive and load sensing properties are ... -
Effekt av brukermedvirkning i institusjoner for barn og unge. Systematisk litteratursøk med sortering
(Research report, 2016)Seksjon for velferdstjenester ved Kunnskapssenteret fikk i september 2015 i oppdrag av Barne‐, ungdoms‐ og familiedirektoratet å identifisere forskning om effekt av bru‐ kermedvirkning i institusjoner for barn og unge ...