Blar i SINTEF Industri på tittel
Viser treff 716-735 av 1537
-
Impact of conductor assembly indentation on the fatigue properties of copper power cable wires
(Peer reviewed; Journal article, 2022)The production process of high voltage power cables includes the assembly of the conductor, which is composed of different layer of independent wires wound in helixes of opposite pitch for each subsequent layer. Each wire, ... -
The impact of external quality assurance of costs estimates on cost overruns: Empirical evidence from the norwegian road sector
(Journal article; Peer reviewed, 2015)Cost overruns in transport infrastructure projects are prevalent and have been well documented in the literature; see, for instance, Flyvbjerg et al. (2003), Odeck (2004 and 2014) and Cantarelli et al. (2010). Governments ... -
Impact of inlet flow on macrosegregation formation accounting for grain motion and morphology evolution in DC casting of aluminium
(The Minerals, Metals & Materials Series;2367-1181, Peer reviewed; Journal article, 2018)Several transport mechanisms contribute to macrosegregation formation in Direct Chill (DC) casting of aluminium. The latter include solidification shrinkage induced flow, thermal-solutal convection and grain motion. The ... -
Impact of Innovations from the Norwegian CCS Research Centre (NCCS)
(SINTEF Proceedings;7, Chapter, 2021)We have evaluated the potential impact of the research and innovation performed in the Norwegian CCS Research Centre (NCCS). In this context, impact was evaluated along several axes. Examples include reduced emissions, ... -
The Impact of Operating Parameters on the Gas-Phase Sulfur Concentration after High Temperature Sulfur Sorption on a Supported Mo-Mn Sorbent
(Peer reviewed; Journal article, 2021)The impact of operating parameters on H2S capture from a syngas mixture by a Mo-promoted Mn-based high-temperature sorbent was investigated. The parameters investigated included temperature, space velocity, H2S concentration ... -
The impact of saturation on seismic dispersion in shales — Laboratory measurements
(Peer reviewed; Journal article, 2018)Previous studies found a significant increase of acoustic velocities between seismic and ultrasonic frequencies (seismic dispersion) for shales, which would have to be taken into account when comparing seismic or sonic ... -
Impact of Solvent on the Thermal Stability of Amines
(Peer reviewed; Journal article, 2022)Water-lean solvents have been proposed as a possible alternative to aqueous amine systems in postcombustion carbon capture. There is however little data available on how amine degradation is affected by different solvents. ... -
Impact of thermal history on defects formation in the last solid fraction of Cz silicon ingots
(Peer reviewed; Journal article, 2018)For the first time, the impact of the tail detachment on the quality of the last solid fraction of a Czochralski silicon ingot body is reported. Simulations of the thermal history were performed on CGSim software and showed ... -
IMPLEMENTING THE KINETIC THEORY OF GRANULAR FLOWS INTO THE LAGRANGIAN DENSE DISCRETE PHASE MODEL
(SINTEF proceedings;2387-4295, Chapter, 2017) -
Implications of water cooling of green anodes during anode baking – a thermodynamic study
(Proceedings of the 36th International ICSOBA Conference;2018, Journal article, 2018)Water can be present in significant amounts in green anodes due to cooling with water after the forming process. The chemical environment in the pit can potentially be affected by the presence of water and may cause ... -
Important Aspects Regarding the Chemical Stability of Aqueous Amine Solvents for CO2 Capture
(Peer reviewed; Journal article, 2022)The chemical stability of aqueous amines is an essential property to study before new amines are introduced in pilot plants, to reduce risks related to the operation, cost and environment. There are no standard methods for ... -
Improved CO2 flux by dissolution of oxide ions into the molten carbonate phase of dual-phase CO2 separation membranes
(Peer reviewed; Journal article, 2019)In a solid-liquid dual-phase CO2 separation membrane, the native ions in the molten alkali carbonate, including carbonate anions and metal cations can transport CO2 in a process that is charge-compensated by electronic ... -
Improved cyclability of Nickel-rich layered oxides
(Peer reviewed; Journal article, 2020)This study compares the physico- and electro- chemical properties of LiNi0.8Mn0.10Co0.1O2 (NMC811) and LiNi0.83Mn0.06Co0.09Al0.1O2 (NMCA) prepared by an oxalic acid co-precipitation. Deposition of a SiO2 surface coating ... -
Improved electrochemical performance and solid electrolyte interphase properties of electrolytes based on lithium bis(fluorosulfonyl)imide for high content silicon anodes
(Peer reviewed; Journal article, 2022)Electrodes containing 60 wt% micron-sized silicon were investigated with electrolytes containing carbonate solvents and either LiPF6 or lithium bis(fluorosulfonyl)imide (LiFSI) salt. The electrodes showed improved performance, ... -
An improved modelling framework for strength and work hardening of precipitate strengthened Al–Mg–Si alloys
(Peer reviewed; Journal article, 2022)A modelling framework for the strength and work hardening contributions in age hardened Al–Mg–Si alloys is presented. The modelling work is based on transmission electron microscopy (TEM) measurements of the needle-shaped ... -
Improved multi-stage cross-flow fluidized bed classifier
(Peer reviewed; Journal article, 2019)In the present work, improvements to a novel fluidized bed solids classification system previously published by Jayarathna et al. are discussed (Jayarathna et al., 2018 [1]). The system is designed for a high temperature ... -
Improved multidetector asymmetrical-flow field-flow fractionation method for particle sizing and concentration measurements of lipid-based nanocarriers for RNA delivery
(Peer reviewed; Journal article, 2021)Lipid-based nanoparticles for RNA delivery (LNP-RNA) are revolutionizing the nanomedicine field, with one approved gene therapy formulation and two approved vaccines against COVID-19, as well as multiple ongoing clinical ... -
Improving ageing kinetics and precipitation hardening in an Al-Mg-Si alloy by minor Cd addition
(Peer reviewed; Journal article, 2018)This study reports significant improvements in both the age hardening kinetics and peak hardness of an Al-Mg-Si alloy by microalloying with 0.06 at% Cd. A detailed high-angle annular dark-field scanning transmission electron ... -
Impurity Elements in Raw Gas Ultra-Fines from Aluminium Electrolysis Cells
(Peer reviewed; Journal article, 2012)The effect of alumina feeding and pot suction rate on the amount and composition of fine particles in raw gases has been investigated. Particle size distribution of ultra-fines (Di < 10 μm) were measured in real time and ... -
Impurity removal from Si by Si-Ca-Mg ternary alloying-leaching system
(Peer reviewed; Journal article, 2020)In this work, Si-Ca-Mg alloys were made with different compositions and solidification conditions to investigate the impurity segregation and separation performance from Si, especially for the crucial P impurity at several ...