Blar i SINTEF Industri på tittel
Viser treff 407-426 av 1566
-
Effect of Field Caprock Shale Exposure to CO2 on Its Mechanical Properties—A Comparison of Experimental Techniques
(Peer reviewed; Journal article, 2022)Laboratory tests were performed on the Draupne shale formation, which may serve as a seal over CO2 storage sites. Different techniques were used to assess the integrity and mechanical properties of the shale, with the main ... -
The effect of frictional pressure, geometry and wall friction on the modelling of a pseudo-2D bubbling fluidised bed reactor
(Peer reviewed; Journal article, 2015)The two fluid model (TFM) closed by the kinetic theory of granular flows (KTGF) has been developed to a high level of maturity over the past three decades. However, significant uncertainties still remain about the influence ... -
Effect of Gas Recycling on the Performance of a Moving Bed Temperature-Swing (MBTSA) Process for CO2 Capture in a Coal Fired Power Plant Context
(Peer reviewed; Journal article, 2017)A mathematical model of a continuous moving-bed temperature-swing adsorption (MBTSA) process for post-combustion CO2 capture in a coal-fired power plant context has been developed. Process simulations have been done using ... -
Effect of Geometrical Irregularities on Fatigue of Lead Sheathing for Submarine High Voltage Power Cable Applications
(Peer reviewed; Journal article, 2021)High voltage subsea power cables are typically composed of several layers, including: a conductive core, a dielectric layer, a ductile metallic watertight barrier and a series of radial and axial armours and polymer layers. ... -
The Effect of Grain Refiner on Aluminium Filtration
(The Minerals, Metals & Materials Series;2367-1181, Peer reviewed; Journal article, 2021)Grain refinement of aluminium and its alloys is a common industrial practice. Fine equiaxed, grain structure leads to improved castability, strength, machinability, formability, and good surface finish. Filtration is one ... -
Effect of graphene coatings on the morphology of submillimeter thin copper wires after salt spray aging
(Peer reviewed; Journal article, 2023)Unprotected copper conductors are prone to oxidation and corrosion, especially when in contact with salt water or at high temperature. In this study, we compared commercially available coating with graphene oxide and ... -
Effect of heat input on nanomechanical properties of wire-arc additive manufactured Al 4047 alloys
(Peer reviewed; Journal article, 2022)Heat input is one of the most important process parameters during additive manufacturing (AM). It is of great significance to understand the effect of heat input on the microstructure and nanomechanical properties, as well ... -
Effect of Heat Treatment on the Ductility of Inconel 718 Processed by Laser Powder Bed Fusion
(Lecture Notes in Electrical Engineering;1876-1100, Peer reviewed; Journal article, 2020)Inconel 718 is a precipitation-hardening alloy, with a typical heat treatment consisting of solution annealing before a two-stage ageing process. Depending on the heat treatment procedure, strength or ductility can be ... -
The effect of heavy deformation on the precipitation in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy
(Peer reviewed; Journal article, 2020)This work has investigated the effect of the combination of natural ageing and 80% pre-deformation after solution heat treatment on precipitation during subsequent artificial ageing in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy. ... -
The effect of hot air exposure on the mechanical properties and carbon dioxide permeability of hydrogenated nitrile butadiene rubber (HNBR) with varying carbon black content
(Peer reviewed; Journal article, 2020)The effect of hot air exposure at 150ºC for up to 12 weeks (ca. 2000 h) on the properties of hydrogenated nitrile butadiene rubber (HNBR) compounds with varying degrees of carbon black content was investigated and re-ported ... -
The effect of hydrocarbon ageing on the mechanical properties, apparent crosslink density and CO2 diffusion of a hydrogenated nitrile butadiene rubber (HNBR)
(Peer reviewed; Journal article, 2015)The effect of ageing in a sweet oil environment on the tensile properties, apparent crosslink density, CO2 diffusion and Shore hardness of a typical carbon black reinforced hydrogenated nitrile butadiene rubber (HNBR) is ... -
The Effect of Impurities on γ-Alumina Chlorination in a Fluidized Bed Reactor: A CPFD Study
(Peer reviewed; Journal article, 2022)Alumina is one of the most widely used materials today, with a total annual production of millions of tonnes of highly pure alumina. A large portion of this is used to make metal aluminum. Apart from that, a growing amount ... -
Effect of Inclusion and Filtration on Grain Refinement Efficiency of Aluminum Alloy
(Peer reviewed; Journal article, 2022)It is well known that the filtration efficiency of ceramic foam filters (CFF) on aluminum melt can be significantly reduced by the addition of grain refiner particles under a high inclusion load. Also, it is usually ... -
Effect of laser structured micro patterns on the polyvinyl butyral/oxide/steel interface stability
(Peer reviewed; Journal article, 2020)This work investigated the effect of steel substrate topography and roughness on cathodic disbonding resistance and wet adhesion of the polyvinyl butyral/oxide/steel interface. Laser structuring was employed to pattern ... -
Effect of liquid viscosity on the performance of a non-porous membrane contactor for CO2 capture
(Journal article; Peer reviewed, 2019)The effect of liquid viscosity on the performance of a non-porous membrane contactor is important to study for a proper solvent selection and process design. In this work, the overall mass transfer coefficient for MEA- and ... -
Effect of long periods of corrosion on the fatigue lifetime of offshore mooring chain steel
(Peer reviewed; Journal article, 2022)R4-grade mooring chain steel specimens were subjected to alternating phases of saltwater corrosion and air fatigue to replicate seasonal load variations on chains in service. No significant difference in fatigue lifetimes ... -
The effect of long-term use on the Catch efficiency of Biodegradable gillnets
(Peer reviewed; Journal article, 2020)The effect of long-term use on the catch efficiency of biodegradable gillnets was investigated during commercial fishing trials and in controlled lab aging tests. The relative catch efficiency between biodegradable and ... -
The effect of low Cu additions on precipitate crystal structures in overaged Al-Mg-Si(-Cu) alloys
(Peer reviewed; Journal article, 2020)This study concerns the effect of low Cu additions (<0.1 at.%) on the precipitate crystal structure evolution in three Al-Mg-Si(-Cu) alloys during overageing. The evolution was assessed through a combination of atomic ... -
Effect of low temperature tensile properties on crack driving force for Arctic applications
(Peer reviewed; Journal article, 2017)Many petroleum companies expand their activities further north towards the Arctic region, resulting in design temperatures down to −60 °C, which is much lower than what is usual for most current petroleum installations. ... -
Effect of Manufacturing Techniques in Pressure Drop on Triple Periodical Minimal Surface Packings
(Peer reviewed; Journal article, 2021)Structured packings are important elements to enhance mass and heat transfer in the chemical industry. New techniques of manufacturing, like 3D printing, can create completely new families of solids used for this purpose. ...