Show simple item record

dc.contributor.authorTabeshfar, Mohadese
dc.contributor.authorSalehi, Mehdi
dc.contributor.authorDini, Ghasem
dc.contributor.authorDahl, Paul Inge
dc.contributor.authorEinarsrud, Mari-Ann
dc.contributor.authorWiik, Kjell
dc.date.accessioned2022-10-12T13:50:17Z
dc.date.available2022-10-12T13:50:17Z
dc.date.created2021-01-19T15:08:01Z
dc.date.issued2020
dc.identifier.citationSurface & Coatings Technology. 2020, .en_US
dc.identifier.issn0257-8972
dc.identifier.urihttps://hdl.handle.net/11250/3025665
dc.description.abstractGd2Zr2O7 ceramic is considered as a potential candidate for thermal barrier coatings. Here we present hot corrosion behavior of single layer Gd2Zr2O7 (GZO), Gd2Zr2O7 + 50 wt% YbSZ (GZO/YbSZ), YSZ and double-layer YSZ/Gd2Zr2O7 + 50 wt% YbSZ (YSZ + GZO/YbSZ) coatings prepared by air plasma spraying on Inconel 625 substrates. Prior to hot corrosion the fracture toughness of the coatings was assessed by Vickers indentation showing a variation between 0.6 and 2.3 MPa.m1/2 where the GZO/YbSZ coating exhibited the highest fracture toughness. The hot corrosion test was conducted by exposing the coatings to an equimolar mixture of Na2SO4 and V2O5 at 750 °C. After the hot corrosion test, the type of phases, chemical composition, microstructure and crack formation were investigated. Formation of GdVO4 and YVO4 was observed as the corrosion products in the GZO containing coatings and the YSZ coating, respectively. All coatings showed the formation of monoclinic zirconia after the corrosion test. The Gd2Zr2O7 + 50 wt% YbSZ (GZO/YbSZ) coating showed the best hot corrosion resistance due to reduced reactivity and enhanced fracture toughness and represents a new composition with properties promising for TBC applications.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.subjectPlasma sprayingen_US
dc.subjectGd2Zr2O7YbSZYSZen_US
dc.subjectThermal barrier coatingsen_US
dc.subjectHot corrosionen_US
dc.titleHot corrosion of Gd2Zr2O7, Gd2Zr2O7/YbSZ, YSZ+Gd2Zr2O7/YbSZ, and YSZ thermal barrier coatings exposed to Na2SO4+V2O5.en_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionacceptedVersionen_US
dc.rights.holderThis is the authors’ accepted and refereed manuscript to the article. This manuscript version is made available under the CC-BY-NC-ND 4.0 license. Open access from 3 December 2022en_US
dc.source.pagenumber13en_US
dc.source.volume409en_US
dc.source.journalSurface & Coatings Technologyen_US
dc.identifier.doi10.1016/j.surfcoat.2020.126718
dc.identifier.cristin1874550
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal