Interfacial microstructure and mechanical properties of Ti−6Al−4V/Al7050 joints fabricated using the insert molding method
Li, Hong-Xiang; Nie, Xin-Yu; He, Zan-bing; Zhao, Kang-Ning; Du, Qiang; Zhang, Ji-Shan; Zhuang, Lin-Zhong
Peer reviewed, Journal article
Published version
Date
2017Metadata
Show full item recordCollections
- Publikasjoner fra CRIStin - SINTEF AS [5638]
- SINTEF Industri [1529]
Original version
International Journal of Minerals, Metallurgy and Materials. 2017, 24 (12), 1412-1423. 10.1007/s12613-017-1534-yAbstract
Ti−6Al−4V/Al7050 joints were fabricated by a method of insert molding and corresponding interfacial microstructure and mechanical properties were investigated. The interfacial thickness was sensitive to holding temperature during the first stage, and a good metallurgical bonding interface with a thickness of about 90 μm can be obtained at 750°C. X-ray diffraction, transmission electron microscopy, and thermodynamic analyses showed that the interface mainly contained intermetallic compound TiAl3 and Al matrix. The joints featured good mechanical properties, i.e., shear strength of 154 MPa, tensile strength of 215 MPa, and compressive strength of 283 MPa, which are superior to those of joints fabricated by other methods. Coherent boundaries between Al/TiAl3 and TiAl3/Ti were confirmed to contribute to outstanding interfacial mechanical properties and also explained constant fracture occurrence in the Al matrix. Follow-up studies should focus on improving mechanical properties of the Al matrix by deformation and heat treatment.