Transient Control of Dynamic Inductive EV Charging and Impact on Energy Efficiency when Passing a Roadside Coil Section
Chapter
Accepted version
View/ Open
Date
2018Metadata
Show full item recordCollections
- Publikasjoner fra CRIStin - SINTEF Energi [1691]
- SINTEF Energi [1821]
Abstract
This paper discusses the transient control of a system for dynamic inductive power transfer to an electric vehicle when passing a road-side coil section. A series-series-compensated topology with minimum number of passive components is assumed and a slight detuning of the resonance frequencies is introduced to limit the maximum induced current on the vehicle-side. A simple strategy for independent control of the road-side and vehicle-side coils is presented for ensuring strictly controlled charging power. The dynamic response of the resonant currents and of the power transfer is assessed by a small-scale experimental setup designed to represent a freight truck in scale 1:14. Experimental evaluation of the energy transfer efficiency is performed for high and low vehicle speeds and with different strategies for activating the control loops. The results demonstrate that the proposed strategy can ensure very short initialization transients and close-to-optimal operation at rated power when the vehicle-side coil is passing above the roadside coil, even at relatively high traveling speed. The concept of road utilization ratio is introduced to quantify the effect of length and layout of the road coil sections, as well as the dynamic transients, on the energy transfer capability of the system.