SINTEF Industri
Recent Submissions
-
Sperm quality parameters, fertilizing potential, metabolites, and DNA methylation in cold-stored and cryopreserved milt from Atlantic salmon (Salmo salar L.)
(Journal article; Peer reviewed, 2023)Cold storage and freezing/thawing of milt may affect sperm functionality and the subsequent fertilization ability of milt. This study aimed to investigate sperm quality parameters and fertilization potential of Atlantic ... -
Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries
(Journal article; Peer reviewed, 2023)Understanding the cause of lithium dendrites formation and propagation is essential for developing practical all-solid-state batteries. Li dendrites are associated with mechanical stress accumulation and can cause cell ... -
Magnesiothermic Reduction of Silica: A Machine Learning Study
(Journal article; Peer reviewed, 2023)undamental studies have been carried out experimentally and theoretically on the magnesiothermic reduction of silica with different Mg/SiO2 molar ratios (1–4) in the temperature range of 1073 to 1373 K with different ... -
Building the world's largest Chemical Looping Combustion (CLC) unit
(Peer reviewed; Journal article, 2023)The world's largest Chemical Looping Combustion (CLC) demonstration unit is being built close to the city of Chengdu in China. The design and construction of the unit, as well as the coming testing, is done within the ... -
Reduction Kinetics of Pre-Oxidized Ilmenite Pellets by H2-H2O Gas Mixtures
(Peer reviewed; Journal article, 2023)The reduction behavior of pelletized and pre-oxidized ilmenite is investigated in H2-H2O atmospheres containing between 0 and 7% H2O and at temperatures between 983 and 1183 K (710 and 910 °C). The reduction mechanism ... -
Hydroelastic response of concrete shells during impact on calm water
(Peer reviewed; Journal article, 2023)Many ocean structures located offshore are supported by large vertical concrete columns. High and steep storm waves – in the process of breaking – may induce large local slamming loads on these columns. The present work ... -
On the Atomic Structure of the β′′ Precipitate by Density Functional Theory
(Peer reviewed; Journal article, 2023)The substitution of elements into the precipitate in the 6xxx-series of aluminium alloys is an interface sensitive problem. The strain caused by the misfit between the precipitate and the matrix interacts with the size ... -
Assessing cell migration in hydrogels: An overview of relevant materials and methods
(Peer reviewed; Journal article, 2023)Cell migration is essential in numerous living processes, including embryonic development, wound healing, immune responses, and cancer metastasis. From individual cells to collectively migrating epithelial sheets, the ... -
Faster, broader, and deeper! Suggested directions for research on net-zero transitions
(Peer reviewed; Journal article, 2023)The growing attention to the political goal of achieving net-zero emissions by mid-century reflects past failures to alter the trajectory of increasing greenhouse gas (GHG) emissions. As a consequence, the world now needs ... -
Surface kinetics and bulk transport in La2Ni0.5Cu0.5O4+δ membranes from conductivity relaxation
(Peer reviewed; Journal article, 2023)This work reports conductivity relaxation measurements on both uncoated (1.2 mm thick) and coated (2.0 mm thick) La2Ni0.5Cu0.5O4+δ membranes in the temperature range between 550-850 °C and oxygen partial pressures from ... -
Atomic Layer Deposition of Titanium Oxide-Based Films for Semiconductor Applications—Effects of Precursor and Operating Conditions
(Peer reviewed; Journal article, 2023)Two widely used atomic layer deposition precursors, Tetrakis (dimethylamido) titanium (TDMA-Ti) and titanium tetrachloride (TiCl4), were investigated for use in the deposition of TiOx-based thin films as a passivating ... -
Graphite crucible interaction with Fe–Si–B phase change material in pilot-scale experiments
(Peer reviewed; Journal article, 2023)Fe–26Si–9B alloy is a promising high temperature phase change material (HTPCM), due to its high heat of fusion, small volumetric change, abundance, and low cost. Additionally, graphite has been identified as a promising ... -
Clustering and Precipitation during Early-Stage Artificial Aging of Al–Si–Mg(–Cu) Foundry Alloys
(Peer reviewed; Journal article, 2023)High-Si aluminum foundry alloys are an important material class for products with complex 3D geometries where casting is the most suitable production method. With Mg and/or Cu additions, these alloys gain strength upon ... -
Design optimization of compact gas turbine and steam combined cycles for combined heat and power production in a FPSO system–A case study
(Peer reviewed; Journal article, 2023)This case study aims to cover a wide range of relevant aspects related to combined cycle design, mechanical integrity and operational reliability for cogeneration of heat and power in FPSO systems. The methods consist of ... -
Evaluation of Electrosorption Process for Phosphate and Nitrate Removal from Wastewater
(Peer reviewed; Journal article, 2022)The present work is dedicated to the preparation and characterization of carbon-based electrodes for the removal of phosphates and nitrate ions from wastewater by CDI method. Carbons obtained from the pyrolysis were used ... -
Aligned multi-walled carbon nanotube-embodied hydrogel via low magnetic field: A strategy for engineering aligned injectable scaffolds
(Peer reviewed; Journal article, 2022)Injectable scaffolds are a promising strategy to restore and regenerate damaged and diseased tissues. They require minimally invasive procedure and allow the formation of an in-situ structure of any shape. However, the ... -
The effect of addition of the redox mediator dimethylphenazine on the oxygen reaction in porous carbon electrodes for Li/O2 batteries
(Peer reviewed; Journal article, 2023)Secondary Li–O2 batteries are promising due to their potentially high theoretical energy density. However, both the discharge (oxygen reduction reaction, ORR) and the recharge reaction (oxygen evolution reaction, OER) are ... -
Muligheter for økt verdiskaping gjennom samarbeid mellom havbruks-, jord- og skognæringene i Trøndelag: Identifisering av samarbeidsområder, kunnskapsbehov, råstoffer og forslag til tiltak.
(SINTEF Rapport;2020:00699, Research report, 2020)Denne rapporten gir en oppsummering av mulige og lovende tiltak for økt verdiskaping innen bioøkonomien i Trøndelag på tvers av de tre hovednæringene jord-, skog- og havbruk i Trøndelag. Vi slår fast at volum-tilgangen på ... -
Multi-timescale microscopy methods for the characterization of fluorescently-labeled microbubbles for ultrasound-triggered drug release
(Peer reviewed; Journal article, 2021)Microbubble contrast agents hold great promise for drug delivery applications with ultrasound. Encapsulating drugs in nanoparticles reduces systemic toxicity and increases circulation time of the drugs. In a novel approach ... -
Testing and modelling of butt-welded connections in thin-walled aluminium structures
(Peer reviewed; Journal article, 2022)The present paper experimentally investigated the mechanical behaviour of butt-welded joints and evaluated suitable numerical approaches for modelling them in thin-walled structures with large shell-based models. Welded ...
RSS 2.0