Browsing SINTEF Industri by Subject "TEM"
Now showing items 1-11 of 11
-
Chemical solution deposition of thin films for protonic ceramic fuel cells
(Peer reviewed; Journal article, 2014)Chemical solution deposition (CSD) offers the opportunity to fabricate very thin electrolyte films at lower temperatures than traditional powder-based methods. CSD methods have not been used much in production of protonic ... -
Data on atomic structures of precipitates in an Al-Mg-Cu alloy studied by high resolution transmission electron microscopy and first-principles calculations
(Peer reviewed; Journal article, 2021) -
The effects and behaviour of Li and Cu alloying agents in lean Al-Mg-Si alloys
(Peer reviewed; Journal article, 2016)We show how replacing a fraction of Mg with Li in a lean Al-Mg-Si alloy gives comparable strength and enhanced temperature stability. Replacing solute with smaller amounts of Cu and Li also improves thermal stability and ... -
Inhibition of metal dusting corrosion on Fe-based alloy by combined near surface severe plastic deformation (NS-SPD) and thermochemical treatment
(Peer reviewed; Journal article, 2021)Combined NS-SPD and thermochemical treatment has been used to improve the metal dusting corrosion resistance of Incoloy 800. After testing under infinite carbon activity for 20−100 h, carbon was not found in the NS-SPD ... -
Nanoscale modelling of combined isotropic and kinematic hardening of 6000 series aluminium alloys
(Peer reviewed; Journal article, 2020)Kinematic hardening is incorporated into a nanoscale model for 6000 series aluminium alloys consisting of three sub-models describing in turn precipitation of hardening particles, yield strength and work hardening. The ... -
Pd/CeO2 catalysts as powder in a fixed-bed reactor and as coating in a stacked foil microreactor for the methanol synthesis
(Peer reviewed; Journal article, 2016)Pd/CeO2 as a catalyst for methanol synthesis has been studied in a microreactor consisting of 14 structured foils in a fixed-bed laboratory reactor. Methanol synthesis was carried out at 80 bar and 300 °C with a syngas ... -
Plasmonic properties of aluminium nanowires in amorphous silicon
(Peer reviewed; Journal article, 2022)Plasmonic structures can help enhance optical activity in the ultraviolet (UV) region and therefore enhancing photocatalytic reactions and the detection of organic and biological species. Most plasmonic structures are ... -
Precipitate/matrix incompatibilities related to the {111}Al Ω plates in an Al-Cu-Mg-Ag alloy
(Peer reviewed; Journal article, 2021)The atomic structure of Ω plates forming on {111}Al planes in an Al-Cu-Mg-Ag alloy has been investigated by Z-contrast atomic-resolution scanning transmission electron microscopy imaging and ab initio density functional ... -
Precipitation in an A356 foundry alloy with Cu additions - A transmission electron microscopy study
(Peer reviewed; Journal article, 2019)The influence of different Cu addition levels on the age hardening and precipitation behaviors in an Al356 foundry alloy during artificial aging treatment has been systematically studied. A detailed characterization of the ... -
The Role of Grain Boundary Precipitates during Intergranular Fracture in 6xxx Series Aluminium Alloys
(Peer reviewed; Journal article, 2021)During ageing, 6xxx aluminium alloys will develop a microstructure characterised by needle-shaped Mg/Si-rich precipitates in the bulk, precipitate-free zones along the grain boundaries and larger Mg/Si-rich precipitates ... -
The Effect of Elastic Strain and Small Plastic Deformation on Tensile Strength of a Lean Al–Mg–Si Alloy
(Journal article; Peer reviewed, 2019)Al–Mg–Si alloys are usually formed into their final shape by rolling or extrusion. After extrusion, the aluminium profiles are usually straightened, causing the material to be subjected to a small plastic deformation. This ...