Browsing SINTEF Industri by Author "Larring, Yngve"
Now showing items 1-20 of 24
-
Building the world's largest Chemical Looping Combustion (CLC) unit
Haugen, Nils Erland L; Li, Zhenshan; Gouraud, Vincent; Bertholin, Stephane; Li, Weicheng; Larring, Yngve; Luo, Kun; Szlek, Andrzej; Flach, Todd; Langørgen, Øyvind; Liu, Xinglei; Yazdanpanah, Mahdi (Peer reviewed; Journal article, 2023)The world's largest Chemical Looping Combustion (CLC) demonstration unit is being built close to the city of Chengdu in China. The design and construction of the unit, as well as the coming testing, is done within the ... -
COMPOSITE: A concept for high efficiency power production with integrated CO2 capture from solid fuels
Larring, Yngve; Cloete, Schalk Willem Petrus; Giuffrida, Antonio; Romano, Matteo C.; Chiesa, Paolo; Morud, John; Pishahang, Mehdi; Chikukwa, Actor; Amini, Shahriar; Tobiesen, Finn Andrew (Peer reviewed; Journal article, 2017)The COMPOSITE concept combines packed bed chemical looping combustion (PBCLC) with chemical looping for oxygen production (CLOP) in an integrated gasification combined cycle for high efficiency power production. Detailed ... -
Development of novel metal-supported proton ceramic electrolyser cell with thin film BZY15–Ni electrode and BZY15 electrolyte
Stange, Marit Synnøve Sæverud; Stefan, Elena; Denonville, Christelle; Larring, Yngve; Rørvik, Per Martin; Haugsrud, Reidar (Peer reviewed; Journal article, 2017)Metal supports for planar MS-PCEC were manufactured using tape-casting of low-cost ferritic stainless steel. A coating protecting the metal support against oxidation was applied by vacuum infiltration and a buffer layer ... -
Doping strategies for increased oxygen permeability of CaTiO3 based membranes
Polfus, Jonathan M.; Xing, Wen; Sunding, Martin Fleissner; Hanetho, Sidsel Meli; Dahl, Paul Inge; Larring, Yngve; Fontaine, Marie-Laure; Bredesen, Rune (Peer reviewed; Journal article, 2015)Oxygen permeation measurements are performed on dense samples of CaTi0.85Fe0.15O3−δ, CaTi0.75Fe0.15Mg0.05O3−δ and CaTi0.75Fe0.15Mn0.10O3−δ in combination with density functional theory (DFT) calculations and X-ray photoelectron ... -
Enhanced O2 flux of CaTi0.85Fe0.15O3 – d based membranes by Mn doping
Polfus, Jonathan M.; Xing, Wen; Riktor, Marit Dalseth; Sunding, Martin Fleissner; Dahl, Paul Inge; Hanetho, Sidsel Meli; Mokkelbost, Tommy; Larring, Yngve; Fontaine, Marie-Laure; Bredesen, Rune (Peer reviewed; Journal article, 2016)Dense symmetric membranes of CaTi0.85−xFe0.15MnxO3−δ (x = 0.1, 0.15, 0.25, 0.4) are investigated in order to determine the optimal Mn dopant content with respect to highest O2 flux. O2 permeation measurements are performed ... -
Fabrication process parameters significantly affect the perovskite oxygen carriers materials (OCM) performance in chemical looping with oxygen uncoupling (CLOU)
Larring, Yngve; Pishahang, Mehdi; Tolchard, Julian R; Lind, Anna Maria; Sunding, Martin Fleissner; Stensrød, Ruth Elisabeth; Jacobs, Marijke; Snijkers, Frans; van der Kolk, Tjalling; Albertsen, Knuth (Peer reviewed; Journal article, 2019)The CLOU performance of the CaTixMn0.9−xMg0.1O3 (CMTM) perovskite-type system was investigated, comparing materials produced at laboratory scale with those made at industrial ton scale. The CLOU and conversion performances ... -
Fabrication process parameters significantly affect the perovskite oxygen carriers materials (OCM) performance in chemical looping with oxygen uncoupling (CLOU)
Larring, Yngve; Pishahang, Mehdi; Tolchard, Julian R; Lind, Anna Maria; Sunding, Martin Fleissner; Stensrød, Ruth Elisabeth; Jacobs, Marijke; Snijkers, Frans; van der Kolk, Tjalling; Albertsen, Knuth (Peer reviewed; Journal article, 2019)The CLOU performance of the CaTixMn0.9-xMg0.1O3 (CMTM) perovskite-type system was investigated, comparing materials produced at laboratory scale with those made at industrial ton scale. The CLOU and conversion performances were ... -
Fast redox kinetics of a perovskite oxygen carrier measured using micro-fluidized bed thermogravimetric analysis
Liu, Lei; Li, Zhenshan; Li, Zuoan; Larring, Yngve; Li, Ye; Cai, Ningsheng (Peer reviewed; Journal article, 2020)Redox kinetics of oxygen carrier in chemical looping combustion (CLC) is important for reactor design and its oxidation enthalpy is important in order to establish auto thermal demonstration. Most published redox kinetics ... -
Heterogeneous reaction kinetics of a perovskite oxygen carrier for chemical looping combustion coupled with oxygen uncoupling
Liu, Lei; Li, Zhenshan; Li, Zuoan; Larring, Yngve; Cai, Ningsheng (Peer reviewed; Journal article, 2020)The determination of more exact heterogeneous kinetics of oxygen carriers is a crucial task for modelling, used to predict performance and design of demonstrating pilot units. Thermogravimetric analysis (TGA) is the most ... -
Increasing the thermal expansion of proton conducting Y-doped BaZrO3 by Sr and Ce substitution
Dayaghi, Amir Masoud; Haugsrud, Reidar; Stange, Marit Synnøve Sæverud; Larring, Yngve; Strandbakke, Ragnar; Norby, Truls Eivind (Peer reviewed; Journal article, 2021)Proton conducting oxide electrolytes find potential application in proton ceramic fuel cells and electrolyzers operating at intermediate temperatures, e.g. 400–600 °C. However, state-of-the-art proton conducting ceramics ... -
Increasing the thermal expansion of proton conducting Y-doped BaZrO3 by Sr and Ce substitution
Dayaghi, Amir Masoud; Haugsrud, Reidar; Stange, Marit Synnøve Sæverud; Larring, Yngve; Strandbakke, Ragnar; Norby, Truls Eivind (Peer reviewed; Journal article, 2021) -
Industry-scale production of a perovskite oxide as oxygen carrier material in chemical looping
Liu, Lei; Li, Zhenshan; Wang, Yang; Li, Zuoan; Larring, Yngve; Cai, Ningsheng (Peer reviewed; Journal article, 2021)How to upscale the production of oxygen carrier particles from laboratory level to industrial level is still challenging in the field of chemical looping. The upscaled oxygen carrier must maintain its physical and chemical ... -
Investigation of La1−xSrxCrO3−∂ (x ~ 0.1) as Membrane for Hydrogen Production
Larring, Yngve; Vigen, Camilla Kaori; Ahouanto, Florian; Fontaine, Marie-Laure; Peters, Thijs; Smith, Jens Bragdø; Norby, Truls; Bredesen, Rune (Peer reviewed; Journal article, 2012)Various inorganic membranes have demonstrated good capability to separate hydrogen from other gases at elevated temperatures. Hydrogen-permeable, dense, mixed proton-electron conducting ceramic oxides offer superior ... -
Layered microstructures based on BaZr0.85Y0.15O3−δ by pulsed laser deposition for metal-supported proton ceramic electrolyser cells
Stefan, Elena; Stange, Marit Synnøve Sæverud; Denonville, Christelle; Larring, Yngve; Hildenbrand, Nicolas; Norby, Truls Eivind; Haugsrud, Reidar (Peer reviewed; Journal article, 2017)Planar metal-supported cell designs provide cost-effective scaling-up of solid oxide fuel cells and electrolysers. Here, we report on the fabrication of a BaZr0.85Y0.15O3−δ–NiO (BZY15–NiO) composite electrode and ... -
Manufacturing of perovskite oxygen carriers by spray granulation for chemical looping combustion
Thoréton, Vincent; Darell, Ove; Spjelkavik, Aud I.; Sunding, Martin Fleissner; Mokkelbost, Tommy; Pishahang, Mehdi; Wiik, Kjell; Larring, Yngve (Journal article; Peer reviewed, 2017) -
Microstructural Stability of Tailored CaMn0.875−xFexTi0.125O3−δ Perovskite Oxygen Carrier Materials for Chemical Looping Combustion
Thoréton, Vincent; Pishahang, Mehdi; Mokkelbost, Tommy; Wiik, Kjell; Larring, Yngve (Journal article; Peer reviewed, 2017) -
Negative CO2 Emissions with Chemical-Looping Combustion of Biomass – A Nordic Energy Research Flagship Project
Rydén, Magnus; Lyngfelt, Anders; Langørgen, Øyvind; Larring, Yngve; Teir, Sebastian; Havåg, Hallstein; Karmhagen, Per (Journal article; Peer reviewed, 2017)The Nordic countries constitute a natural location for the development and deployment of Bio-Energy with Carbon Capture and Storage (BECCS). Finland, Sweden and Denmark are world-leading with respect to heat and power ... -
Oxygen permeation and creep behavior of Ca1-xSrxTi0.6Fe0.15Mn0.25O3-δ (x=0, 0.5) membrane materials
Polfus, Jonathan M.; Xing, Wen; Pecanac, Goran; Fossdal, Anita; Hanetho, Sidsel Meli; Larring, Yngve; Malzbender, Jürgen; Fontaine, Marie-Laure; Bredesen, Rune (Peer reviewed; Journal article, 2016)Oxygen permeation measurements were performed on dense symmetric samples of Ca0.5Sr0.5Ti0.6Fe0.15Mn0.25O3−δ and compared to CaTi0.6Fe0.15Mn0.25O3−δ in order to assess the influence of the perovskite lattice volume on oxygen ... -
Oxygen production at intermediate temperatures using Ca2AlMnO5+δ double perovskite-type oxides
Pishahang, Mehdi; Larring, Yngve; Cloete, Schalk Willem Petrus; Sunding, Martin Fleissner; Denonville, Christelle; Li, Zuoan (Peer reviewed; Journal article, 2023)Double-perovskite Ca2AlMnO5+δ exhibits promising oxygen uptake and release capacity at intermediate temperatures (400–700 °C), which makes it an interesting candidate for in situ oxygen production in an integrated gasification ... -
Palladium (Pd) membranes as key enabling technology for precombustion CO2 capture and hydrogen production
Peters, Thijs; Rørvik, Per Martin; Sunde, Tor Olav Løveng; Stange, Marit Synnøve Sæverud; Roness, Frode; Reinertsen, Torkild; Ræder, Henrik; Larring, Yngve; Bredesen, Rune (Peer reviewed; Journal article, 2017)Palladium (Pd) membranes are a promising enabling technology for power generation and hydrogen production with CO2 capture. SINTEF has developed and patented a flexible technology to produce Pd-alloy membranes that ...