Blar i SINTEF Industri på tittel
Viser treff 639-658 av 1537
-
Graphite crucible interaction with Fe–Si–B phase change material in pilot-scale experiments
(Peer reviewed; Journal article, 2023)Fe–26Si–9B alloy is a promising high temperature phase change material (HTPCM), due to its high heat of fusion, small volumetric change, abundance, and low cost. Additionally, graphite has been identified as a promising ... -
Grid independence behaviour of fluidized bed reactor simulations using the Two Fluid Model: Detailed parametric study
(Peer reviewed; Journal article, 2016)This short communication builds on previous work on the grid independence behaviour of the Two Fluid Model in reactive bubbling fluidized bed simulations. Regarding hydrodynamic grid independence behaviour (the numerical ... -
Grid independence behaviour of fluidized bed reactor simulations using the Two Fluid Model: Effect of particle size
(Peer reviewed; Journal article, 2014)It is well known that particle size has a significant influence on the grid independence behaviour of fluidized bed reactor simulations carried out using the Two Fluid Model (TFM) approach. The general rule of thumb states ... -
Guidelines for establishing an etching procedure for dislocation density measurements on multicrystalline silicon samples
(Journal article; Peer reviewed, 2018)With multicrystalline silicon becoming the main material used for photovoltaic applications and dislocations being one of the main material limitations to better solar cell efficiency, etch pit density measurements are ... -
Health benefits of microalgae and their microbiomes
(Peer reviewed; Journal article, 2022)Microalgae comprise a phylogenetically very diverse group of photosynthetic unicellular pro- and eukaryotic organisms growing in marine and other aquatic environments. While they are well explored for the generation of ... -
Heat of absorption of carbon dioxide (CO2) into aqueous N-methyldiethanolamine (MDEA) and N,N-dimethylmonoethanolamine (DMMEA)
(Peer reviewed; Journal article, 2014)In this work the heat of absorption of CO2 into aqueous solutions of N-methyldiethanolamine (MDEA) and N,N- dimethylmonoethanolamine (DMMEA) has been investigated in a reaction calorimeter. The experiments were conducted ... -
Heat source management in wire-arc additive manufacturing process for Al-Mg and Al-Si alloys
(Journal article; Peer reviewed, 2019)Modelling of wire-arc additive manufacturing process is an effective way for adapting the optimum parameters as well as understanding and managing the sequences of layer-by-layer deposition. Some of these parameters such ... -
Heating New Anodes Using the Waste Heat of Anode Butts: Establishing the Interface Thermal Contact Resistance
(The Minerals, Metals & Materials Series;2367-1181, Peer reviewed; Journal article, 2021)In order to be able to assess the rate of heat transfer between a new anode and an anode butt, it is critical to measure the interface thermal contact resistance between them. For that purpose, a lab experiment has been ... -
Heavy Metal Emissions through Particulate Matter from Aluminium Electrolysis
(Peer reviewed; Journal article, 2023)Heavy metal emissions from the aluminium industry are mainly carried from the plant through fugitive particulate matter (PM) originating from the aluminium electrolysis pot room. To evaluate the behaviour of metal-carrying ... -
Hematite microdisks as an alternative anode material for lithium-ion batteries
(Journal article; Peer reviewed, 2019)In this work, hematite microdisks (500 nm to 1 μm in diameter, ∼200 nm in thickness) have been synthesized by a facile hydrothermal method which exhibited good cycling stability at a current density of 200 mA g−1 and ... -
Heterogeneous nucleation and grain growth of inoculated aluminium alloys: An integrated study by in-situ X-radiography and numerical modelling
(Peer reviewed; Journal article, 2017)A comprehensive study on the heterogeneous nucleation and grain growth of Al-10 wt.%Cu alloys inoculated with Al-5Ti-1B was carried out. To further reveal the solute segregation stifling mechanism, in-situ near-isothermal ... -
Heterogeneous reaction kinetics of a perovskite oxygen carrier for chemical looping combustion coupled with oxygen uncoupling
(Peer reviewed; Journal article, 2020)The determination of more exact heterogeneous kinetics of oxygen carriers is a crucial task for modelling, used to predict performance and design of demonstrating pilot units. Thermogravimetric analysis (TGA) is the most ... -
High capacity Mg batteries based on surface-controlled electrochemical reactions
(Journal article; Peer reviewed, 2018)Mg batteries are one of several new battery technologies expected to partially substitute lithium-based batteries in the future due to the lower cost and higher safety. However, the development of Mg batteries has been ... -
High cycle fatigue life estimation of AlSi10Mg processed by laser powder bed fusion
(Journal article, 2018)Fatigue life is known to be dependent on the surface properties of the material. Surface roughness provokes local stress concentration and cause crack initiation even at minute cyclic loads. In laser powder bed fusion, ... -
High entropy alloy CrFeNiCoCu sputter deposited films: Structure, electrical properties, and oxidation
(Peer reviewed; Journal article, 2022)High entropy alloy (HEA) films of CrFeCoNiCu were deposited by sputtering. Their structure was characterized and their electric transport properties were studied by temperature-dependent Hall and Seebeck measurements. The ... -
High interfacial charge storage capability of carbonaceous cathodes for Mg batteries
(Peer reviewed; Journal article, 2018)A rechargeable Mg battery where the capacity mainly originates from reversible reactions occurring at the electrode/electrolyte interface efficiently avoids the challenge of sluggish Mg intercalation encountered in ... -
High performance and toxicity assessment of Ta3N5 nanotubes for photoelectrochemical water splitting
(Peer reviewed; Journal article, 2020)In this work, Co-based cocatalysts are electrodeposited on mesoporous Ta3N5 nanotubes. The electrodeposition time is varied and the optimized photoelectrode reaches a photocurrent density of 6.3 mA/cm2 at 1.23 V vs. SHE, ... -
High performance and toxicity assessment of Ta3N5 nanotubes for photoelectrochemical water splitting
(Journal article; Peer reviewed, 2019)In this work, Co-based cocatalysts are electrodeposited on mesoporous Ta3N5 nanotubes. The electrodeposition time is varied and the optimized photoelectrode reaches a photocurrent density of 6.3 mA/cm2 at 1.23 V vs. SHE, ... -
High performance multicrystalline silicon: Grain structure and iron precipitation
(Peer reviewed; Journal article, 2017)A study of the spatial occurrence of iron precipitation in a high performance multicrystalline silicon (HPMC-Si) sample is presented. The separated effects of grain-boundaries, sparse intra-granular dislocations, and ... -
High temperature interaction between Si–B alloys and Si3N4
(Peer reviewed; Journal article, 2021)Si3N4 is a candidate crucible material for Si–B alloys in high temperature thermal energy storage system. In this regard, the phase formation in the Si–B alloys and the interaction between the alloys and Si3N4 were ...