Blar i SINTEF Industri på tittel
Viser treff 537-556 av 1534
-
Experimental Demonstration of a Novel Gas Switching Combustion Reactor for Power Production with Integrated CO2 Capture
(Peer reviewed; Journal article, 2013)This paper experimentally demonstrates the feasibility of a novel gas switching combustion (GSC) reactor as an alternative to the traditional chemical looping combustion (CLC) process for power production with integrated ... -
Experimental demonstration of pressurized chemical looping combustion in an internally circulating reactor for power production with integrated CO2 capture
(Peer reviewed; Journal article, 2020)This study presents an experimental demonstration of pressurized chemical looping combustion (CLC) in an internally circulating reactor (ICR). The ICR concept is a novel alternative to the conventional interconnected ... -
Experimental detection of forming limit strains on samples with multiple local necks
(Peer reviewed; Journal article, 2016)Sheet metal formability is traditionally described by the forming limit curve (FLC). Experimental FLCs are obtained by performing formability tests and determining failure strains. The strains are usually measured either ... -
Experimental Investigation of Polymer-Coated Silica Nanoparticles for Enhanced Oil Recovery.
(Journal article; Peer reviewed, 2019)Recently, polymer-coated nanoparticles were proposed for enhanced oil recovery (EOR) due to their improved properties such as solubility, stability, stabilization of emulsions and low particle retention on the rock surface. ... -
Experimental measurement of temperature-dependent equivalent stress-strain curves of a 420 MPa structural steel with axisymmetric notched tensile specimens
(Peer reviewed; Journal article, 2019)Recently, the authors in this paper proposed a correction function to determine material’s equivalent stress-strain curve with axisymmetric-notched tensile specimens. In this study, tensile tests were performed at room ... -
Experimental Methods for Investigation of Drilling Fluid Displacement in Irregular Annuli
(Peer reviewed; Journal article, 2020)Experimental methods are still indispensable for fluid mechanics research, despite advancements in the modelling and computer simulation field. Experimental data are vital for validating simulations of complex flow systems. ... -
Experimental Results of Pressure Swing Adsorption (PSA) for Pre-combustion CO2 Capture with Metal Organic Frameworks
(Peer reviewed; Journal article, 2017)Vacuum Pressure Swing Adsorption (VPSA) has already proved that it can be used for capture of CO2 from the tail gas of the PSA process for hydrogen purification. The demo operated in Port Arthur by Air Products has already ... -
Experimental review of the performances of protective coatings for interconnects in solid oxide fuel cells
(Peer reviewed; Journal article, 2023)Ferritic stainless steel interconnects are used in solid oxide fuel cells; however, coatings are required to improve their performance. Although several types of coatings have been proposed, they have been scarcely ... -
Experimental set-up for determination of the large-strain tensile behaviour of polymers at low temperatures
(Journal article; Peer reviewed, 2016)In this study, we present a method to determine the large-strain tensile behaviour of polymers at low temperatures using a purpose-built temperature chamber made of polycarbonate (PC). This chamber allows for several cameras ... -
Experimental Study of the use of Particles for Tracking the Interfaces in Primary Cementing of Concentric and Eccentric Wells
(SINTEF Proceedings;4, Chapter; Conference object; Peer reviewed, 2019)In this study, our recent and new approach for detailed tracking of the interface between well fluid and cement by using particles is investigated. The particles can enable us to know the precise location of the interface ... -
Experimental study of the use of tracing particles for interface tracking in primary cementing in an eccentric hele–shaw cell
(Peer reviewed; Journal article, 2021)We present the results of the displacement flows of different Newtonian and Herschel–Bulkley non-Newtonian fluids in a new-developed eccentric Hele–Shaw cell with dynamic similarly to real field wellbore annulus during ... -
An experimental study on pre-stretched double-chamber 6000-series aluminium profiles subjected to quasi-static and dynamic axial crushing
(Peer reviewed; Journal article, 2020)Automotive crash boxes require a material selection with strength and ductility in a balanced combination. In this work, the behaviour of double-chamber AA6063 and AA6082 aluminium profiles subjected to quasi-static and ... -
Experimental study on the formability of AA6016 sheets pre-strained by rolling
(Peer reviewed; Journal article, 2017) -
Experimental Treatment of Mucinous Peritoneal Metastases Using Patient-Derived Xenograft Models
(Peer reviewed; Journal article, 2020)Mucinous peritoneal metastases (PM) generally respond poorly to systemic treatment, and there is a clear unmet need for new treatment strategies to improve survival and quality of life for patients with PM. In this work, ... -
Experiments and modelling of three-phase vertical pipe flow
(Peer reviewed; Journal article, 2021)A set of two- and three-phase experiments were conducted in a 50 m long 400 vertical pipe using nitrogen, Exxsol D60 and water at 45 bara pressure. The results show that the liquid content and pressure drop are highly ... -
Exploiting mannuronan C-5 epimerases in commercial alginate production
(Peer reviewed; Journal article, 2020) -
Exploration of degradation chemistry by Advanced analytical methodology
(Journal article; Peer reviewed, 2017) -
Exploring Dry-Film FTIR Spectroscopy to Characterize Milk Composition and Subclinical Ketosis throughout a Cow’s Lactation
(Peer reviewed; Journal article, 2021)The use of technologies for measurements of health parameters of individual cows may ensure early detection of diseases and maximization of individual cow and herd potential. In the present study, dry-film Fourier transform ... -
An exponential time-differencing method for monotonic relaxation systems
(Peer reviewed; Journal article, 2014)We present first and second-order accurate exponential time differencing methods for a special class of stiff ODEs, denoted as monotonic relaxation ODEs. Some desirable accuracy and robustness properties of our methods are ... -
Exposure to ultrafine particles in the ferroalloy industry using a logbook method
(Peer reviewed; Journal article, 2020)Background: It is difficult to assess workers’ exposure to ultrafine particles (UFP) due to the lack of personal sampling equipment available for this particle fraction. The logbook method has been proposed as a general ...