Blar i SINTEF Industri på tittel

Viser treff 478-497 av 1534

    • Element distribution in the silicomanganese production process 

      Ma, Yan; Moosavi-Khoonsari, Elmira; Kero, Ida; Tranell, Gabriella (Peer reviewed; Journal article, 2018)
      A pilot scale, silicomanganese alloy production campaign was performed in a 440 kVA, single phase electric furnace in order to establish an overview of the minor- and trace element contents in process input raw materials ...

    • Elemental electron energy loss mapping of a precipitate in a multi-component aluminium alloy 

      Mørtsell, Eva Anne; Wenner, Sigurd; Longo, Paulo; Andersen, Sigmund Jarle; Marioara, Calin Daniel; Holmestad, Randi (Peer reviewed; Journal article, 2016)
      The elemental distribution of a precipitate cross section, situated in a lean Al-Mg-Si-Cu-Ag-Ge alloy, has been investigated in detail by electron energy loss spectroscopy (EELS) and aberration corrected high angle annular ...

    • Elucidating the role of tetraethylammonium in the silicate condensation reaction from Ab initio molecular dynamics simulations 

      Mai, Ngoc Lan; Do, Ha T.; Hoang, Nguyen-Hieu; Nguyen, Anh H.; Tran, Khanh-Quang; Meijer, Evert Jan; Trinh, Thuat (Peer reviewed; Journal article, 2020)
      The understanding of the formation of silicate oligomers in the initial stage of zeolite synthesis is important. The use of organic structure-directing agents (OSDAs) is known to be a key factor in the formation of different ...

    • Enabling circularity: Analysis of factors influencing MSW sorting behaviour in Central Norway 

      Grytli, Tuva; Birgen, Cansu (Peer reviewed; Journal article, 2023)
      A comprehensive waste composition analysis was undertaken in 2021, covering ten municipal waste companies in Central Norway. The results are used in a multiple linear regression model to explore factors influencing the ...

    • Enabling Efficient Heat Recovery from Aluminium Pot Gas 

      Clos, Daniel Perez; Andresen, Trond; Nekså, Petter; Johnsen, Sverre Gullikstad; Aune, Ragnhild Elizabeth (The Minerals, Metals & Materials Series;2367-1181, Chapter, 2017)

    • Enabling Increased Delithiation Rates in Silicon-Based Anodes through Alloying with Phosphorus 

      Huld, Frederik Thorbjørn; Lai, Samson Yuxiu; Tucho, Wakshum Mekonnen; Batmaz, Rasim; Jensen, Ingvild Julie Thue; Lu, Song; Eleri, Obinna Egwu; Koposov, Alexey; Yu, Zhixin; Lou, Fengliu (Peer reviewed; Journal article, 2022)
      The capability of battery materials to deliver not only high lithium storage capacity, but also the ability to operate at high charge/discharge rates is an essential property for development of new batteries. In the present ...

    • Encapsulation of salmon oil using complex coacervation: Probing the effect of gum acacia on interfacial tension, coacervation and oxidative stability 

      Glomm, Wilhelm; Molesworth, Peter Patrick; Yesiltas, Betül; Jacobsen, Charlotte; Johnsen, Heidi (Peer reviewed; Journal article, 2023)
      The molecular characteristics of the food-grade polysaccharide gum acacia may vary depending on source, which could in turn significantly affect its behaviour as thickener, emulsifier and as a wall material in microencapsulation. ...

    • Energi og industri - Mulighetsrom verdikjeder - NHO Veikart for fremtidens næringsliv 

      Støa, Petter; Røkke, Nils Anders; Størset, Sigmund Østtveit; Spooren, Rudie; Knutstad, Gaute A. Johansen; Dahl, Nina; Akporiaye, Duncan; Bredesen, Rune; Sand, Gunnar; Tveten, Erlend Grytli; Mortensholm, Stein Kleppe; Steenstrup-Duch, Anne; Mehammer, Eirill Bachmann; Schäffer, Linn Emelie; Sandquist, Judit; Vullum-Bruer, Fride; Sheridan, Edel Maria; Alnæs, Lisbeth-Ingrid; Høgaas, Per Helge; Lademo, Odd-Geir; Øvrelid, Eivind Johannes (SINTEF Rapport;2019:01139, Research report, 2019)
      Kan fremtidig verdiskaping innen energi og industri opprettholde Norge som bærekraftig velferdsnasjon, samtidig som vi oppfyller våre forpliktelser i internasjonale klimaavtaler og løser egne utfordringer i tråd med FNs ...

    • Energi og industri - Mulighetsrom verdikjeder - NHO Veikart for fremtidens næringsliv 

      Støa, Petter; Røkke, Nils Anders; Størset, Sigmund Østtveit; Spooren, Rudie; Knutstad, Gaute A. Johansen; Dahl, Nina; Akporiaye, Duncan; Bredesen, Rune; Sand, Gunnar; Tveten, Erlend Grytli; Mortensholm, Stein Kleppe; Steenstrup-Duch, Anne; Mehammer, Eirill Bachmann; Schäffer, Linn Emelie; Sandquist, Judit; Vullum-Bruer, Fride; Sheridan, Edel Maria; Alnæs, Lisbeth-Ingrid; Høgaas, Per Helge; Lademo, Odd-Geir; Øvrelid, Eivind Johannes (SINTEF Rapport;2019:01139, Research report, 2019)
      Kan fremtidig verdiskaping innen energi og industri opprettholde Norge som bærekraftig velferdsnasjon, samtidig som vi oppfyller våre forpliktelser i internasjonale klimaavtaler og løser egne utfordringer i tråd med FNs ...

    • Energy assessments of onboard CO2 capture from ship engines by MEA-based post combustion capture system with flue gas heat integration 

      Einbu, Aslak; Pettersen, Torbjørn; Morud, John; Tobiesen, Finn Andrew; Jayarathna, Chameera; Skagestad, Ragnhild; Nysæther, Gisle (Peer reviewed; Journal article, 2022)
      An early phase feasibility study was carried out for offshore CO2 capture from ship engines of a CO2 transport ship. A flexible in-house process simulator was applied in the assessments. Parametric studies of the overall ...

    • Energy conservation and coupling error reduction in non-iterative co-simulations 

      Sadjina, Severin Simon; Pedersen, Eilif (Journal article; Peer reviewed, 2019)
      When simulators are energetically coupled in a co-simulation, coupling errors alter the total energy of the full system. This distorts system dynamics, lowers the quality of the results, and can lead to instability. Using ...

    • Energy Distribution in HC FeMn and SiMn - Energy vs Exergy Analyses 

      Larssen, Trine Asklund; Kero, Ida; Tangstad, Merete (Journal article; Peer reviewed, 2019)
      The metal producing industry is a high consumer of energy and large amounts of excess heat are produced. Increasing the energy efficiency would be beneficial, both in terms of the environment and also from an economical ...

    • Energy-Intensive Industry as a Practical and Cost-Effective Vector for Blue Hydrogen Exports – A Norwegian Case Study 

      Cloete, Schalk; Cloete, Jan Hendrik (SINTEF Proceedings;7, Chapter; Peer reviewed; Conference object, 2021)
      As political will gathers behind the ideal of rapid decarbonization, the future looks increasingly dim for oil & gas exporters. CCS offers a pathway for continued operation in the longer-term as the world decarbonizes, ...

    • Engineering chitinolytic activity into a cellulose-active lytic polysaccharide monooxygenase provides insights into substrate specificity 

      Jensen, Marianne Slang; Klinkenberg, Geir; Bissaro, Bastien; Chylenski, Piotr; Vaaje-Kolstad, Gustav; Kvitvang, Hans Fredrik Nyvold; Nærdal, Guro Kruge; Sletta, Håvard; Forsberg, Zarah; Eijsink, Vincent (Journal article; Peer reviewed, 2019)
      Lytic polysaccharide monooxygenases (LPMOs) catalyze oxidative cleavage of recalcitrant polysaccharides such as cellulose and chitin and play an important role in the enzymatic degradation of biomass. While it is clear ...

    • Enhanced CO2/H2 separation by GO and PVA-GO embedded PVAm nanocomposite membranes 

      Xu, Wenqi; Lindbråthen, Arne; Janakiram, Saravanan; Ansaloni, Luca; Deng, Liyuan (Peer reviewed; Journal article, 2023)
      Membrane technology for CO2/H2 separation, especially when using CO2-selective membranes to keep H2 on the high-pressure retentate side, has been considered promising and energy-efficient for further H2 transport and ...

    • Enhanced gas sensing response for 2D α-MoO3 layers: thickness-dependent changes in defect concentration, surface oxygen adsorption, and metal-metal oxide contact 

      Bisht, Prashant; Kumar, Arvind; Jensen, Ingvild Julie Thue; Ahmad, Mujeeb; Belle, Branson; Mehta, Bodh (Peer reviewed; Journal article, 2021)
      In this study, α-MoO3 two-dimensional (2D) layers and thin films were synthesized using pulsed laser deposition technique. X-ray diffraction and Raman spectroscopy confirm the formation of anisotropic α-MoO3. Atomic Force ...

    • Enhanced Impact Strength of Recycled PET/Glass Fiber Composites 

      Monti, Marco; Scrivani, Maria Teresa; Kociolek, Irene; Larsen, Åge G.; Olafsen, Kjell; Lambertini, Vito (Peer reviewed; Journal article, 2021)
      In this paper, we report a study on the effects of different ethylene copolymers in improving the impact strength of a fiber-reinforced composite based on a recycled poly(ethylene terephthalate) (rPET) from post-consumer ...

    • Enhanced Mechanical Properties in 6082 Aluminum Alloy Processed by Cyclic Deformation 

      Chen, Xuanliang; Mørtsell, Eva Anne; Sunde, Jonas Kristoffer; O, Minho; Marioara, Calin Daniel; Holmestad, Randi; Kobayashi, Equo (Peer reviewed; Journal article, 2021)
      Aging heat treatment is the most commonly used strengthening method for Al–Mg–Si alloys since high-density precipitates will be formed to hinder the movement of dislocations. In the current work, room temperature cyclic ...

    • Enhanced nucleation and precipitation hardening in Al-Mg-Si(-Cu) alloys with minor Cd additions 

      Qian, Feng; Zhao, Dongdong; Mørtsell, Eva Anne; Jin, Shenbao; Marioara, Calin Daniel; Andersen, Sigmund Jarle; Sha, Gang; Li, Yanjun (Peer reviewed; Journal article, 2020)
      This work reports a novel effect of impurity element Cd on enhancing the precipitation kinetics and increasing the peak hardness of Al–Mg–Si(–Cu) alloys during artificial ageing. It is found that the number density of age ...

    • Enhanced O2 flux of CaTi0.85Fe0.15O3 – d based membranes by Mn doping 

      Polfus, Jonathan M.; Xing, Wen; Riktor, Marit Dalseth; Sunding, Martin Fleissner; Dahl, Paul Inge; Hanetho, Sidsel Meli; Mokkelbost, Tommy; Larring, Yngve; Fontaine, Marie-Laure; Bredesen, Rune (Peer reviewed; Journal article, 2016)
      Dense symmetric membranes of CaTi0.85−xFe0.15MnxO3−δ (x = 0.1, 0.15, 0.25, 0.4) are investigated in order to determine the optimal Mn dopant content with respect to highest O2 flux. O2 permeation measurements are performed ...