Blar i SINTEF Industri på tittel
Viser treff 676-695 av 1566
-
High-purity H2 production with CO2 capture based on coal gasification
(Journal article; Peer reviewed, 2015)A novel hybrid concept is proposed, combining Pd-alloy membrane and low temperature separation technology, to produce pure H2 from gasified coal and capture the main part of the generated CO2. 75% of the H2 produced from ... -
High-quality dense 3D point clouds with active stereo and a miniaturizable interferometric pattern projector
(Peer reviewed; Journal article, 2021)We have built and characterized a compact, simple and flexible 3D camera based on interferometric fringe projection and stereo reconstruction. The camera uses multi-frame active stereo as basis for 3D reconstruction, ... -
High-Rate Epitaxial Growth of Silicon Using Electron Beam Evaporation at High Temperatures
(Peer reviewed; Journal article, 2023)This paper describes the high-rate (~1.5 μm/min) growth of Si films on Si supporting substrates with (100) crystallographic orientation at 600 °C, 800 °C, and 1000 °C in a vacuum environment of ~1 × 10−5 mbar using electron ... -
High-throughput assay for effect screening of amphotericin B and bioactive components on filamentous Candida albicans
(Peer reviewed; Journal article, 2022) -
High-throughput screening reveals higher synergistic effect of MEK inhibitor combinations in colon cancer spheroids
(Peer reviewed; Journal article, 2020)Drug combinations have been proposed to combat drug resistance, but putative treatments are challenged by low bench-to-bed translational efficiency. To explore the effect of cell culture format and readout methods on ... -
Highlights and Main Findings from the 8 Year SOLVit R&D Programme – Bringing Solvents and Technology from Laboratory to Industry
(Peer reviewed; Journal article, 2017)SOLVit is an eight year (2008 – 2015) and 37 million Euro research programme focusing on developing energy efficient and environmental friendly post combustion carbon capture systems for large-scale industrial CO2 emissions. ... -
Highly Active Nickel-Based Catalyst for Hydrogen Evolution in Anion Exchange Membrane Electrolysis
(Journal article; Peer reviewed, 2018)Anion exchange membrane (AEM) electrolysis is hampered by two main issues: stability and performance. Focusing on the latter, this work demonstrates a highly active NiMo cathode for hydrogen evolution in AEM electrolysis. ... -
Highly CO2-permeable membranes derived from a midblock-sulfonated multiblock polymer after submersion in water
(Journal article; Peer reviewed, 2019)To mitigate the effect of atmospheric CO2 on global climate change, gas separation materials that simultaneously exhibit high CO2 permeability and selectivity in gas mixtures must be developed. In this study, CO2 transport ... -
Highly Stretchable and Transparent Ionic Conductor with Novel Hydrophobicity and Extreme-Temperature Tolerance
(Peer reviewed; Journal article, 2020)Highly stretchable and transparent ionic conducting materials have enabled new concepts of electronic devices denoted as iontronics, with a distinguishable working mechanism and performances from the conventional electronics. ... -
HNBR elastomer composite with zero thermal contraction over a range of temperatures
(Peer reviewed; Journal article, 2019)Elastomers such as hydrogenated nitrile butadiene rubber (HNBR) are known to have inferior dimensional stability upon temperature changes compared to metallic materials. This can result in thermal contraction mismatches ... -
Hole cleaning and wet-granular rheology of rock cutting beds: Impact of drilling fluid composition
(Peer reviewed; Journal article, 2022)Cuttings-beds formation is an issue that must be considered during all wellbore drilling operations. This problem increases at highly deviated or horizontal wells, where cuttings removal efficiency becomes one of the most ... -
Hot corrosion of Gd2Zr2O7, Gd2Zr2O7/YbSZ, YSZ+Gd2Zr2O7/YbSZ, and YSZ thermal barrier coatings exposed to Na2SO4+V2O5.
(Peer reviewed; Journal article, 2020)Gd2Zr2O7 ceramic is considered as a potential candidate for thermal barrier coatings. Here we present hot corrosion behavior of single layer Gd2Zr2O7 (GZO), Gd2Zr2O7 + 50 wt% YbSZ (GZO/YbSZ), YSZ and double-layer ... -
Hot Deformation and Die-Quenching of 6000-Series Alloys—The Effect of Quench-Interruption Temperature
(The Minerals, Metals & Materials Series;2367-1696, Chapter; Peer reviewed, 2020)The automotive industry face demands to produce lightweight vehicles and substituting steel with aluminium is a straightforward solution. Age hardenable aluminium alloys are attractive candidates when the aim is a combination ... -
The hot spot in Al-rod extrusion investigated by FEM-analysis
(Peer reviewed; Journal article, 2019)FEM-analysis is applied to study thermo-mechanical conditions in an industrial Al-rod extrusion process using long billets as stock material. In the analysis, focus is on the conditions in the hot spot present inside the ... -
How calcium prevents precipitation hardening in Al–Mg–Si alloys
(Peer reviewed; Journal article, 2013)We have investigated the effect on precipitate microstructure and hardness upon adding small amounts of Ca to a base Al–Mg–Si alloy. The main investigative techniques were transmission and scanning electron microscopy. We ... -
A hybrid aluminium alloy and its zoo of interacting nano-precipitates
(Peer reviewed; Journal article, 2015)An alloy with aluminium as its base element is heat treated to form a multitude of precipitate phases known from different classes of industrial alloys: Al–Cu(–Mg), Al–Mg–Si–Cu, and Al–Zn–Mg. Nanometer-sized needle-shaped ... -
Hybrid and cognitive digital twins for the process industry
(Peer reviewed; Journal article, 2023)In a Europe that is undergoing digital transformation, the COGNITWIN project is contributing to accelerate the transformation and introduce Industry 4.0 to the European process industries. The opportunities here can be ... -
Hybrid molecular dynamic Monte Carlo simulation and experimental production of a multi-component Cu–Fe–Ni–Mo–W alloy
(Peer reviewed; Journal article, 2023)High-entropy alloys are a class of materials intensely studied in the last years due to their innovative properties. Their unconventional compositions and chemical structures hold promise for achieving unprecedented ... -
Hybrid Welding of 45 mm High Strength Steel Sections
(Peer reviewed; Journal article, 2017)Thick section welding has significant importance for oil and gas industry in low temperature regions. Arc welding is usually employed providing suitable quality joints with acceptable toughness at low temperatures with ...