Blar i SINTEF Industri på tittel
Viser treff 380-399 av 1562
-
Economic assessment of the swing adsorption reactor cluster for CO2 capture from cement production
(Peer reviewed; Journal article, 2020)Cement production is responsible for about 8% of global CO2 emissions. Most of these emissions originate from the process itself and thus cannot be avoided via clean energy, leaving CO2 capture as the only viable solution. ... -
Ecotoxicological effects of transformed silver and titanium dioxide nanoparticles in the effluent from a lab-scale wastewater treatment system
(Journal article; Peer reviewed, 2018-07-26)In this study, a lab-scale wastewater treatment plant (WWTP), simulating biological treatment, received 10 μg/L Ag and 100 μg/L TiO2 nanoparticles (NPs) for 5 weeks. NP partitioning was evaluated by size fractionation (>0.7 ... -
Effect of (5%) CO2 on the Oxidation Rate During Cooling of Industrial Aluminum White Dross
(Peer reviewed; Journal article, 2023)Aluminum (Al) white dross is classified as hazardous waste and originates from the primary production of Al as a result of molten metal oxidation at an industrial scale. As the produced dross reduces the annual metallic ... -
Effect of acoustic cluster therapy (ACT®) combined with chemotherapy in a patient-derived xenograft mouse model of pancreatic cancer
(Peer reviewed; Journal article, 2022)Pancreatic ductal adenocarcinomas respond poorly to chemotherapy, in part due to the dense tumor stroma that hinders drug delivery. Ultrasound (US) in combination with microbubbles has previously shown promise as a means ... -
The effect of addition of the redox mediator dimethylphenazine on the oxygen reaction in porous carbon electrodes for Li/O2 batteries
(Peer reviewed; Journal article, 2023)Secondary Li–O2 batteries are promising due to their potentially high theoretical energy density. However, both the discharge (oxygen reduction reaction, ORR) and the recharge reaction (oxygen evolution reaction, OER) are ... -
The effect of addition of the redox mediator dimethylphenazine on the oxygen reaction in porous carbon electrodes for Li/O2 batteries
(Peer reviewed; Journal article, 2023)Secondary Li–O2 batteries are promising due to their potentially high theoretical energy density. However, both the discharge (oxygen reduction reaction, ORR) and the recharge reaction (oxygen evolution reaction, OER) are ... -
The effect of aerosol-deposited ash components on a cobalt-based Fischer–Tropsch catalyst
(Journal article; Peer reviewed, 2019)The effect of ash salts on Co-based Fisher–Tropsch catalysts was studied using an aerosol deposition technique. The major elements in the ash were found to be K, S and Cl. The ash was deposited on a calcined catalyst as ... -
Effect of amorphization-mediated plasticity on the hydrogen-void interaction in ideal lattices under hydrostatic tension
(Peer reviewed; Journal article, 2018)A thermodynamic model is derived to study the void nucleation in ideal lattices under hydrostatic tension loading and predicts that the plasticity has to be initiated before homogeneous nucleation of voids. Molecular ... -
Effect of calcination temperature and time on properties of steam exploded pellets
(Peer reviewed; Journal article, 2022)Carbon anodes play an essential role in the production of primary aluminium. Currently fossil carbon is used for producing carbon anodes. Reducing the carbon utilization and replacing the fossil carbon are the main routes ... -
Effect of carbonation on bulk resistivity of cement/carbon nanofiber composites
(Peer reviewed; Journal article, 2021)The conductivity of cement/carbon nanofiber (CNF) composite materials has previously been shown to be affected by parameters such as e.g. CNF content or water to cement (w/c) ratios, water saturation and temperature. ... -
Effect of climatic parameters on marine atmospheric corrosion: correlation analysis of on-site sensors data
(Peer reviewed; Journal article, 2023)A good understanding of influencing parameters is required to predict corrosivity in marine and coastal environments. This study investigated the influences of real-time data of (i) air temperature, (ii) sensor surface ... -
Effect of Co incorporation and support selection on deoxygenation selectivity and stability of (Co)Mo catalysts in anisole HDO
(Peer reviewed; Journal article, 2019)A series of supported Co modified Mo catalysts was prepared by varying the Co/Mo ratio in the range from 0 to 1 while maintaining the Mo loading at ca. 10 wt%. A sequential incipient wetness impregnation method, with Mo ... -
Effect of CO2 tax on energy use in oil production: waterflooding optimization under different emission costs
(Peer reviewed; Journal article, 2022)Tackling emissions from hydrocarbon production is a necessity because hydrocarbon production will last for a prolonged time. As a popular hydrocarbon production method, waterflooding operation is energy-intensive and ... -
Effect of composition and temperature on current efficiency for aluminium electrolysis from cryolite-based molten alumina electrolytes
(Peer reviewed; Journal article, 2017)The current efficiency (CE) for aluminium electrolysis in modern cells can be as high as 96 %. The main reason for loss in current efficiency is the so-called back reaction between dissolved metal and the anode product of ... -
Effect of Contamination on the Friction and Wear of Carboxylic Acids in Aqueous Lubricants
(Peer reviewed; Journal article, 2018)The friction and wear mechanisms of water-based fluids consisting of various types of carboxylic acids have been systematically investigated using a ball-on-disc tribometer on a super duplex stainless steel under boundary ... -
Effect of copper addition on the cluster formation behavior of Al-Mg-Si, Al-Zn-Mg, and Al-Mg-Ge in the natural aging
(Peer reviewed; Journal article, 2018)The time-dependent resistivity of Al-Mg-Si(-Cu), Al-Zn-Mg(-Cu), and Al-Mg-Ge(-Cu) alloys are studied over a range of constant temperatures between 255 K and 320 K. The resistivity vs time curves for the samples show three ... -
Effect of crucible rotation on the temperature and oxygen distributions in Czochralski grown silicon for photovoltaic applications
(Peer reviewed; Journal article, 2021)Temperature and oxygen distributions were numerically studied for the Czochralski (Cz) growth of 8′′ diameter silicon single crystals for photovoltaic applications. Fluctuations in the dopant concentration (striation ... -
The effect of Cu and Ge additions on strength and precipitation in a lean 6xxx aluminium alloy
(Peer reviewed; Journal article, 2015)It has been demonstrated that the strength loss in a lean Al-Mg-Si alloy due to solute reduction could be compensated by back-adding a lower at % of Ge and Cu. Nanosized precipitate needles which are the main cause of ... -
Effect of cyclic ageing on the early-stage clustering in Al–Zn-Mg(-Cu) alloys
(Peer reviewed; Journal article, 2022)The cyclic application of mechanical stress to aluminum alloys at room temperature, referred to as cyclic ageing, continuously injects vacancies, enabling dynamic precipitation of a fine distribution of solute clusters. ... -
The Effect of Deformation and Isothermal Heat Treatment of a 5005 Aluminum Alloy
(Peer reviewed; Journal article, 2024)In the aluminum industry, forming is an important process step that introduces dislocations in the material. To investigate the effect of dislocation retention after ageing on 6xxx-series alloys, a non-heat-treatable 5005 ...