Browsing SINTEF Industri by Title
Now showing items 640-659 of 1562
-
GHGT-12 Performance of the IGCC with distributed feeding of H2 in the gas turbine burner
(Peer reviewed; Journal article, 2014)A main hurdle for realizing the IGCC with CO2 capture is the lack of gas turbines capable of burning hydrogen in an environmental-friendly, yet energy-efficient manner. With currently proposed combustion schemes an efficiency ... -
Global Assessment of Mycobacterium avium subsp. hominissuis Genetic Requirement for Growth and Virulence
(Peer reviewed; Journal article, 2019) -
Global Circular Economy Scenario in a Multiregional Input-Output Framework
(Journal article; Peer reviewed, 2019)In a resource-constrained world of an estimated 10 billion people in 2050 with the same material aspirations of today’s high-income nations, there is no question: The future economy will need to be circular. From a policy ... -
Governing physics of shallow and deep subsea gas release
(SINTEF Proceedings;1, Chapter; Conference object; Peer reviewed, 2015)A modelling concept for studying the resulting bubble plume from a subsea gas release is presented. Simulation results show good consistency with available experimental data. The modelling concept is applied to assess the ... -
Grain boundary corrosion in TiO2 bone scaffolds doped with group II cations
(Journal article; Peer reviewed, 2019) -
Grain boundary segregation in Pd-Cu-Ag alloys for high permeability hydrogen separation membranes
(Peer reviewed; Journal article, 2018)Dense metal membranes that are based on palladium (Pd) are promising for hydrogen separation and production due to their high selectivity and permeability. Optimization of alloy composition has normally focused on bulk ... -
Grain boundary structures and their correlation with intergranular corrosion in an extruded Al-Mg-Si-Cu alloy
(Peer reviewed; Journal article, 2020)A detailed analysis of grain boundaries in a highly textured Al-Mg-Si-Cu alloy is presented in this work. Electron backscatter diffraction demonstrates the presence of three main categories of grain boundaries in addition ... -
Grain refinement of aluminium welds by Ti, TiB2, and TiC filler wire inoculation
(Peer reviewed; Journal article, 2023)A fine-grained fusion zone characterises a tough aluminium weld. To improve the solidification characteristics and refine the grains in aluminium welding, different inoculation particle combinations were introduced to the ... -
Graphene oxide-based silico-phosphate composite films for optical limiting of ultrashort near-infrared laser pulses
(Peer reviewed; Journal article, 2020)The development of graphene-based materials for optical limiting functionality is an active field of research. Optical limiting for femtosecond laser pulses in the infrared-B (IR-B) (1.4–3 μm) spectral domain has been ... -
Graphene-Based Transparent Conducting Substrates for GaN/AlGaN Nanocolumn Flip-Chip Ultraviolet Light-Emitting Diodes
(Peer reviewed; Journal article, 2021)Flip-chip ultraviolet light-emitting diodes based on self-assembled GaN/AlGaN nanocolumns have been fabricated, exploiting single-layer graphene not only as a growth substrate but also as a transparent conducting electrode. ... -
Graphite crucible interaction with Fe–Si–B phase change material in pilot-scale experiments
(Peer reviewed; Journal article, 2023)Fe–26Si–9B alloy is a promising high temperature phase change material (HTPCM), due to its high heat of fusion, small volumetric change, abundance, and low cost. Additionally, graphite has been identified as a promising ... -
Grid independence behaviour of fluidized bed reactor simulations using the Two Fluid Model: Detailed parametric study
(Peer reviewed; Journal article, 2016)This short communication builds on previous work on the grid independence behaviour of the Two Fluid Model in reactive bubbling fluidized bed simulations. Regarding hydrodynamic grid independence behaviour (the numerical ... -
Grid independence behaviour of fluidized bed reactor simulations using the Two Fluid Model: Effect of particle size
(Peer reviewed; Journal article, 2014)It is well known that particle size has a significant influence on the grid independence behaviour of fluidized bed reactor simulations carried out using the Two Fluid Model (TFM) approach. The general rule of thumb states ... -
Guidelines for establishing an etching procedure for dislocation density measurements on multicrystalline silicon samples
(Journal article; Peer reviewed, 2018)With multicrystalline silicon becoming the main material used for photovoltaic applications and dislocations being one of the main material limitations to better solar cell efficiency, etch pit density measurements are ... -
Health benefits of microalgae and their microbiomes
(Peer reviewed; Journal article, 2022)Microalgae comprise a phylogenetically very diverse group of photosynthetic unicellular pro- and eukaryotic organisms growing in marine and other aquatic environments. While they are well explored for the generation of ... -
Heat of absorption of carbon dioxide (CO2) into aqueous N-methyldiethanolamine (MDEA) and N,N-dimethylmonoethanolamine (DMMEA)
(Peer reviewed; Journal article, 2014)In this work the heat of absorption of CO2 into aqueous solutions of N-methyldiethanolamine (MDEA) and N,N- dimethylmonoethanolamine (DMMEA) has been investigated in a reaction calorimeter. The experiments were conducted ... -
Heat source management in wire-arc additive manufacturing process for Al-Mg and Al-Si alloys
(Journal article; Peer reviewed, 2019)Modelling of wire-arc additive manufacturing process is an effective way for adapting the optimum parameters as well as understanding and managing the sequences of layer-by-layer deposition. Some of these parameters such ... -
Heating New Anodes Using the Waste Heat of Anode Butts: Establishing the Interface Thermal Contact Resistance
(The Minerals, Metals & Materials Series;2367-1181, Peer reviewed; Journal article, 2021)In order to be able to assess the rate of heat transfer between a new anode and an anode butt, it is critical to measure the interface thermal contact resistance between them. For that purpose, a lab experiment has been ... -
Heavy Metal Emissions through Particulate Matter from Aluminium Electrolysis
(Peer reviewed; Journal article, 2023)Heavy metal emissions from the aluminium industry are mainly carried from the plant through fugitive particulate matter (PM) originating from the aluminium electrolysis pot room. To evaluate the behaviour of metal-carrying ... -
Hematite microdisks as an alternative anode material for lithium-ion batteries
(Journal article; Peer reviewed, 2019)In this work, hematite microdisks (500 nm to 1 μm in diameter, ∼200 nm in thickness) have been synthesized by a facile hydrothermal method which exhibited good cycling stability at a current density of 200 mA g−1 and ...