Browsing SINTEF Industri by Title
Now showing items 187-206 of 1566
-
Charge Transport in 2D MoS2, WS2, and MoS2–WS2 Heterojunction-Based Field-Effect Transistors: Role of Ambipolarity
(Peer reviewed; Journal article, 2020)Electrical and optical characteristics of few-layered (3–4 L) chemical vapor deposition (CVD) grown MoS2, WS2, and MoS2–WS2 heterostructure-based back-gated field-effect transistor (FET) devices have herein been studied. ... -
Chemical Durability of Thermal Insulating Materials in Hall-Héroult Electrolysis Cells
(Peer reviewed; Journal article, 2019)The most common thermal insulating materials used in the cathode lining in aluminum electrolysis cells are Moler (diatomaceous earth), calcium silicate, or vermiculite based materials. The thermal insulation layer is ... -
Chemical solution deposition of thin films for protonic ceramic fuel cells
(Peer reviewed; Journal article, 2014)Chemical solution deposition (CSD) offers the opportunity to fabricate very thin electrolyte films at lower temperatures than traditional powder-based methods. CSD methods have not been used much in production of protonic ... -
Chemical Stability and Characterization of Degradation Products of Blends of 1-(2-Hydroxyethyl)pyrrolidine and 3-Amino-1-propanol
(Peer reviewed; Journal article, 2022)Aqueous amine solvents are used to capture CO2 from various flue gas sources. In this work, the chemical stability of a blend of 3-amino-1-propanol (3A1P) and 1-(2-hydroxyethyl)pyrrolidine [1-(2HE)PRLD] was studied. The ... -
Chemical stability and H2 flux degradation of cercer membranes based on lanthanum tungstate and lanthanum chromite
(Peer reviewed; Journal article, 2016)Ceramic–ceramic composite (cercer) membranes of (Mo-doped) lanthanum tungstate, La27(W,Mo)5O55.5−δ, and lanthanum chromite, La0.87Sr0.13CrO3−δ, have recently been shown to exhibit H2 permeabilities among state-of-the-art. ... -
Chemical stability of Ca3Co4−xO9+δ/CaMnO3−δ p–n junction for oxide-based thermoelectric generators
(Peer reviewed; Journal article, 2020)An all-oxide thermoelectric generator for high-temperature operation depends on a low electrical resistance of the direct p–n junction. Ca3Co4−xO9+δ and CaMnO3−δ exhibit p-type and n-type electronic conductivity, respectively, ... -
A Children’s Health Perspective on Nano- and Microplastics
(Peer reviewed; Journal article, 2022) -
Chitosan as a wound dressing starting material: antimicrobial Properties and mode of action
(Peer reviewed; Journal article, 2019)Fighting bacterial resistance is one of the concerns in modern days, as antibiotics remain the main resource of bacterial control. Data shows that for every antibiotic developed, there is a microorganism that becomes ... -
Circular Economy and the triple bottom line in Norway
(Peer reviewed; Journal article, 2023)A more circular economy aims to reduce global material consumption, make the most out of our resources, and create a more sustainable economic system. In this paper, we analyze how different circular economy actions in ... -
Cleaning of polycyclic aromatic hydrocarbons (PAH) obtained from ferroalloys plant
(Chapter, 2017)Polycyclic Aromatic hydrocarbons (PAHs) are organic compounds consisting of only hydrogen and aromatic carbon rings. PAHs are neutral, non-polar molecules that are produced due to incomplete combustion of organic matter. ... -
Cleaning of polycyclic aromatic hydrocarbons (PAH) obtained from ferroalloys plant
(SINTEF Proceedings;2, Chapter; Conference object; Peer reviewed, 2017)Polycyclic Aromatic hydrocarbons (PAHs) are organic compounds consisting of only hydrogen and aromatic carbon rings. PAHs are neutral, non-polar molecules that are produced due to incomplete combustion of organic matter. ... -
Closure Law Model Uncertainty Quantification
(Peer reviewed; Journal article, 2021)The prediction uncertainty in simulators for industrial processes is due to uncertainties in the input variables and uncertainties in specification of the models, in particular the closure laws. In this work, the uncertainty ... -
Cluster-size-dependent interaction between ethylene and CuCl2 clusters supported via γ-alumina
(Peer reviewed; Journal article, 2020)Alumina-supported copper chloride serves as an industrial catalyst for ethylene oxychlorination, resulting from its high activity and selectivity. A better understanding of the detailed active site structure and reaction ... -
Clustering and Precipitation during Early-Stage Artificial Aging of Al–Si–Mg(–Cu) Foundry Alloys
(Peer reviewed; Journal article, 2023)High-Si aluminum foundry alloys are an important material class for products with complex 3D geometries where casting is the most suitable production method. With Mg and/or Cu additions, these alloys gain strength upon ... -
Clustering and Vacancy Behavior in High- and Low-Solute Al-Mg-Si Alloys
(Journal article; Peer reviewed, 2014)The precipitate microstructure and vacancy distribution in Al-Mg-Si alloys with different amounts of solute and different heat treatments were investigated by transmission electron microscopy and muon spin relaxation ... -
Co-production of future scenarios of policy action plans in a science-policy-industry interface – The case of microfibre pollution from waste water treatment plants in Norway
(Peer reviewed; Journal article, 2021)One of the ambitions of the UN Decade of Ocean Science is stakeholder interaction to co-produce new ideas and solutions for policy action plans to ensure that environmental challenges are mitigated in a timely manner. ... -
CO2 absorption with membrane contactors vs. packed absorbers-Challenges and opportunities in post combustion capture and natural gas sweetening
(Peer reviewed; Journal article, 2013)The present work presents a case study where membrane contactors are compared with absorption towers for post combustion CO2 capture and for natural gas sweetening. Simulations are performed using a absorber model which ... -
CO2 Capture Opportunities in the Norwegian Silicon Industry
(SINTEF Proceedings;4, Chapter; Conference object; Peer reviewed, 2019)CO2 capture opportunities for the Norwegian silicon industry have been assessed through a techno-economic investigation. Two silicon plants have been studied for integration with a split-flow MEA-based CO2 capture plant. ... -
CO2 capture using a novel hybrid monolith (H-ZSM5/activated carbon) as adsorbent by combined vacuum and electric swing adsorption (VESA)
(Journal article; Peer reviewed, 2019)Electrical swing adsorption (ESA) is an interesting cyclic adsorption technology which relies on rapid Joule heating of the adsorbent to liberate adsorbed molecules such as CO2. In this study we used a novel hybrid ... -
CO2 Capture with Structured Sorbents Containing Multiwalled Carbon Nano Tubes and Polyethyleneimine (PEI)
(SINTEF Proceedings;7, Chapter; Peer reviewed; Conference object, 2021)In this work monolithic adsorbents containing polyethyleneimine (PEI) and multiwalled carbon nanotubes obtained by 3D printing. CO2 and N2 isotherms were measured using a commercial volumetric apparatus. Breakthrough ...