Blar i SINTEF Open på tittel
Viser treff 2588-2607 av 10304
-
Effect of graphene coatings on the morphology of submillimeter thin copper wires after salt spray aging
(Peer reviewed; Journal article, 2023)Unprotected copper conductors are prone to oxidation and corrosion, especially when in contact with salt water or at high temperature. In this study, we compared commercially available coating with graphene oxide and ... -
Effect of grid section design on trawl size selectivity
(Journal article; Peer reviewed, 2023)Sorting grids are introduced in trawl fisheries to improve size selectivity and reduce the variability of results obtained with sorting devices constructed of netting e.g., codends. Grids are rigid or semi-rigid structures ... -
The effect of grid size on catch efficiency and by-catch in the demersal trawl fishery for Norway pout (Trisopterus esmarkii)
(Peer reviewed; Journal article, 2022)Norway pout (Trisopterus esmarkii) is caught with large trawls with small meshed codends, inevitably causing the fishery to have large by-catch issues. To reduce the amount of by-catch, a rigid sorting grid was made ... -
Effect of ground gear modification on bycatch of rays in mediterranean bottom trawl fishery
(Peer reviewed; Journal article, 2022)Bycatch of rays and skates in towed fishing gears represents one of the major threats to these relatively slow-growing marine species. The objective of this study was to modify ground gear in a bottom trawl fishery to ... -
Effect of harvesting month and proximity to fish farm sea cages on the lipid profile of cultivated Saccharina latissima
(Peer reviewed; Journal article, 2021)Macroalgae aquaculture is thriving, and kelps such as Saccharina latissima, are now farmed over different production sites across Europe. Macroalgae production in integrated multi-trophic aquaculture setups is gaining ... -
Effect of heat input on nanomechanical properties of wire-arc additive manufactured Al 4047 alloys
(Peer reviewed; Journal article, 2022)Heat input is one of the most important process parameters during additive manufacturing (AM). It is of great significance to understand the effect of heat input on the microstructure and nanomechanical properties, as well ... -
Effect of Heat Treatment on the Ductility of Inconel 718 Processed by Laser Powder Bed Fusion
(Lecture Notes in Electrical Engineering;1876-1100, Peer reviewed; Journal article, 2020)Inconel 718 is a precipitation-hardening alloy, with a typical heat treatment consisting of solution annealing before a two-stage ageing process. Depending on the heat treatment procedure, strength or ductility can be ... -
The effect of heavy deformation on the precipitation in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy
(Peer reviewed; Journal article, 2020)This work has investigated the effect of the combination of natural ageing and 80% pre-deformation after solution heat treatment on precipitation during subsequent artificial ageing in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy. ... -
Effect of Hook and Bait Size on Catch Efficiency in the Persian Gulf Recreational Fisheries
(Journal article; Peer reviewed, 2018-06-15)The effect of hook and bait sizes on the catch efficiency and size composition of Spangled Emperor Lethrinus nebulosus, Orange‐spotted Grouper Epinephelus coioides, and Narrowbarred Mackerel Scomberomorus commerson was ... -
The effect of hot air exposure on the mechanical properties and carbon dioxide permeability of hydrogenated nitrile butadiene rubber (HNBR) with varying carbon black content
(Peer reviewed; Journal article, 2020)The effect of hot air exposure at 150ºC for up to 12 weeks (ca. 2000 h) on the properties of hydrogenated nitrile butadiene rubber (HNBR) compounds with varying degrees of carbon black content was investigated and re-ported ... -
The effect of hydrocarbon ageing on the mechanical properties, apparent crosslink density and CO2 diffusion of a hydrogenated nitrile butadiene rubber (HNBR)
(Peer reviewed; Journal article, 2015)The effect of ageing in a sweet oil environment on the tensile properties, apparent crosslink density, CO2 diffusion and Shore hardness of a typical carbon black reinforced hydrogenated nitrile butadiene rubber (HNBR) is ... -
The effect of hydrogen enrichment, flame-flame interaction, confinement, and asymmetry on the acoustic response of a model can combustor
(Peer reviewed; Journal article, 2022) -
The Effect of Impurities on γ-Alumina Chlorination in a Fluidized Bed Reactor: A CPFD Study
(Peer reviewed; Journal article, 2022)Alumina is one of the most widely used materials today, with a total annual production of millions of tonnes of highly pure alumina. A large portion of this is used to make metal aluminum. Apart from that, a growing amount ... -
Effect of Including Transient Virtual Impedance in Droop-Controlled Microgrids
(Chapter; Peer reviewed, 2018)Droop control has shown promising results for decentralized power sharing in microgrids. However, the basic scheme can suffer from unequal reactive power sharing power due to differing line impedances between converters ... -
Effect of Inclusion and Filtration on Grain Refinement Efficiency of Aluminum Alloy
(Peer reviewed; Journal article, 2022)It is well known that the filtration efficiency of ceramic foam filters (CFF) on aluminum melt can be significantly reduced by the addition of grain refiner particles under a high inclusion load. Also, it is usually ... -
Effect of laser structured micro patterns on the polyvinyl butyral/oxide/steel interface stability
(Peer reviewed; Journal article, 2020)This work investigated the effect of steel substrate topography and roughness on cathodic disbonding resistance and wet adhesion of the polyvinyl butyral/oxide/steel interface. Laser structuring was employed to pattern ... -
Effect of lay angle of anti-buckling tape on lateral buckling behavior of tensile armors
(ASME Proceedings | Pipeline and Riser Technology;OMAE2015-41527, Chapter, 2015-06)During deep water flexible pipe installation, the pipe is normally free hanging in empty condition from the installation vessel to the seabed. This will introduce large hydrostatic forces to the pipe causing true wall ... -
Effect of leaching on the composition of hydration phases during chloride exposure of mortar
(Peer reviewed; Journal article, 2022)Mortar specimens were exposed to either a 3% NaCl solution or a 3% NaCl+KOH solution for up to 180 days. Exposure to the NaCl solution provoked much more leaching than the NaCl+KOH exposure. Leaching strongly impacted the ... -
Effect of lift force on dense gas‐fluidized beds of non‐spherical particles
(SINTEF Proceedings;2, Chapter, 2017)In industry we encounter many processes that rely on equipment in which particles are suspended by a gas flow, such as pneumatic conveyors, CFB gasifiers, combustors and fluidized bed reactors. In numerical models of these ... -
Effect of lifting the sweeps on bottom trawling catch efficiency on the Northeast arctic cod trawl fishery
(SINTEF Fiskeri og havbruk;A26220, Research report, 2014-07-01)Fuel consumption and environmental concerns have led bottom trawlers fishing for cod (Gadus morhua) in the Barents Sea to use semi-pelagic doors. However, this change may affect fish herding and consequently the catch ...