A study on the influence of impurity content on fatigue endurance in a 6082 Al-alloy

Abstract

The paper investigates the influence of different impurity/scrap elements on the high cycle fatigue (HCF) properties of 6082 Al-alloy. Accordingly, HCF tests are carried out on the different variants- GA1, GA2 and GA3 (designed as a function of varying impurity content)- of this alloy, which resulted in a lower fatigue limit in GA2/GA3 compared to GA1. To explain such behavior, detailed fractographic and microstructural investigations are conducted which bring out that although the crack initiation and propagation modes are mostly transgranular irrespective of alloy variant and stress levels, intergranular crack initiation is promoted in GA2/GA3 at 150 MPa in contrast to occurrence of run-out in GA1 at the same stress level. This phenomenon is found to be facilitated by intermetallic particles anchoring the grain boundaries. These observations point out the possibility of strong sensitivity of stress and alloy variant (varying impurity content) to fatigue life. The difference in fatigue properties as a function of alloy variant could be attributed to the variation in initial microstructure/particle size distribution as well as the slip character. In light of these, a fracture mechanism map is generated which underlines the different mechanisms responsible for fatigue crack initiation among different alloy variants.