Oxygen permeability and surface kinetics of composite oxygen transport membranes based on stabilized δ-Bi2O3
Peer reviewed, Journal article
Published version
Permanent lenke
https://hdl.handle.net/11250/3028434Utgivelsesdato
2022Metadata
Vis full innførselSamlinger
- Publikasjoner fra CRIStin - SINTEF AS [5654]
- SINTEF Industri [1534]
Sammendrag
Composite ceramic membranes based on the ionic conducting Tm-stabilized δ-Bi2O3 (BTM) and the electronic conducting (La0.8Sr0.2)0.99MnO3-δ (LSM) exhibit among the highest oxygen flux values reported for Bi2O3-based membranes. Here, we use pulse-response isotope exchange (PIE) and oxygen flux measurements to elaborate on limiting factors for the oxygen permeation in BTM - 40-70 vol% LSM composites. Once both phases percolate, between 30 and 50 vol% BTM, the flux is essentially independent of the BTM/LSM volume ratio. The oxygen permeability is under mixed diffusion- and surface control, gradually becoming more bulk-limited with increasing temperature. The oxygen exchange coefficients of BTM-LSM are significantly higher than its constituent phases, revealing that a cooperative surface exchange mechanism enhances the kinetics. Some of the Tm was substituted with Pr to introduce electronic conductivity in BTM. (Bi0.8Tm0.15Pr0.05)2O3-δ (BTP) exhibits higher surface exchange coefficients compared to BTM, but the oxygen flux remains one order of magnitude lower than that of percolating BTM-LSM composites.