Vis enkel innførsel

Enhanced Mechanical Properties in 6082 Aluminum Alloy Processed by Cyclic Deformation

dc.contributor.authorChen, Xuanliang
dc.contributor.authorMørtsell, Eva Anne
dc.contributor.authorSunde, Jonas Kristoffer
dc.contributor.authorO, Minho
dc.contributor.authorMarioara, Calin Daniel
dc.contributor.authorHolmestad, Randi
dc.contributor.authorKobayashi, Equo
dc.date.accessioned2022-09-19T10:32:16Z
dc.date.available2022-09-19T10:32:16Z
dc.date.created2021-11-02T08:26:37Z
dc.date.issued2021
dc.identifier.citationMetals , 2021, 11, 11, 1735, 1-10.en_US
dc.identifier.issn2075-4701
dc.identifier.urihttps://hdl.handle.net/11250/3018843
dc.description.abstractAging heat treatment is the most commonly used strengthening method for Al–Mg–Si alloys since high-density precipitates will be formed to hinder the movement of dislocations. In the current work, room temperature cyclic deformation was attempted to strengthen the alloy. We compared tensile test results of aged samples and cyclically deformed samples. It was found that cyclically deformed samples can achieve similar strength and approximately twice the uniform elongation as the peak aged samples. The high density of dislocations and nanoclusters observed in the cyclically deformed samples is thought to be the main reason for strengthening. Different cyclic deformation conditions have been tried and their effects were discussed.en_US
dc.language.isoengen_US
dc.publisherMDPIen_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.subjectelectron microscopyen_US
dc.subjectmechanical propertiesen_US
dc.subjectprecipitationen_US
dc.subjectcyclic deformationen_US
dc.subjectAl–Mg–Si alloyen_US
dc.titleEnhanced Mechanical Properties in 6082 Aluminum Alloy Processed by Cyclic Deformationen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionpublishedVersionen_US
dc.rights.holderCopyright: © 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).en_US
dc.source.pagenumber10en_US
dc.source.volume11en_US
dc.source.journalMetalsen_US
dc.source.issue1735en_US
dc.identifier.doi10.3390/met11111735
dc.identifier.cristin1950450
dc.source.articlenumber1735en_US
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail
Filnavn:
metals-11-01735+%281%29.pdf
Størrelse:
2.104Mb
Format:
PDF
Beskrivelse:
Chen_etal_2021
Åpne

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal