Blar i SINTEF på tittel
Viser treff 2631-2650 av 10067
-
Effects of Increased Wind Power Generation on Mid-Norway’s Energy Balance under Climate Change: A Market Based Approach
(Journal article; Peer reviewed, 2017)Thanks to its huge water storage capacity, Norway has an excess of energy generation at annual scale, although significant regional disparity exists. On average, the Mid-Norway region has an energy deficit and needs to ... -
Effects of interconnections between timber floor elements: dynamic and static evaluations of structural scale tests
(Peer reviewed; Journal article, 2021)Long-span timber floor elements increase the flexibility of a building and exhibit a significant market potential. Timber floor elements are endeavouring to fulfil this potential, but building projects employing long-span ... -
Effects of iron precipitation and novel metal screw extrusion on electrical conductivity and properties of AA1370 aluminium
(Peer reviewed; Journal article, 2020)In order to develop well-performing aluminium electrical conductors, the role of iron and processing method on electrical and mechanical properties was studied for an AA1370 alloy. Firstly, Ø3 mm cold drawn wires were ... -
Effects of K adsorption on the CO-induced restructuring of Co(11-20)
(Journal article; Peer reviewed, 2018)The location of potassium (K) on Cobalt (Co) and its effect on adsorption and adsorption-induced surface restructuring is important for understanding the deactivation of Co Fischer-Tropsch catalysts and the nature of the ... -
Effects of La2O3 Addition into CaO-SiO2 Slag: Structural Evolution and Impurity Separation from Si-Sn Alloy
(Peer reviewed; Journal article, 2021)Boron (B) and phosphorus (P) are the most problematic impurities to be removed in the production of solar-grade silicon by the metallurgical process. In this work, the distribution of B and P between CaO-(La2O3)-SiO2 slags ... -
Effects of Lignin Gasification Impurities on the Growth and Product Distribution of Butyribacterium methylotrophicum during Syngas Fermentation
(Peer reviewed; Journal article, 2023)This work evaluated the effects of condensable syngas impurities on the cell viability and product distribution of Butyribacterium methylotrophicum in syngas fermentation. The condensates were collected during the gasification ... -
The Effects of Low Cu Additions and Predeformation on the Precipitation in a 6060 Al-Mg-Si Alloy
(Peer reviewed; Journal article, 2013)Effects of low Cu additions (≤0.10 wt pct) and 10 pct predeformation before aging on precipitates’ microstructures and types in a 6060 Al-Mg-Si alloy have been investigated using transmission electron microscopy (TEM). It ... -
Effects of marine mine tailing exposure on the development, growth, and lipid accumulation in Calanus finmarchicus
(Peer reviewed; Journal article, 2021)Marine tailing disposal (MTD) is sometimes practiced as an alternative to traditional mine tailing deposition on land. Environmental challenges connected to MTD include spreading of fine particulate matter in the water ... -
Effects of metal dusting relevant exposures of alloy 601 surfaces on carbon formation and oxide development
(Peer reviewed; Journal article, 2020)Ni and Fe are excellent catalysts for carbon formation, and industrial alloys are therefore susceptible to metal dusting corrosion; a costly issue in e.g. synthesis gas manufacture. The objective of this work is to better ... -
Effects of mine tailing exposure on early life stages of cod (Gadus morhua) and haddock (Melanogrammus aeglefinus)
(Peer reviewed; Journal article, 2021)Mining and processing of minerals produce large quantities of tailings as waste. Some countries, including Norway, allow disposal of mine tailings in the sea. In this study we investigated the impacts of tailings from a ... -
Effects of molecular weight-dependent physicochemical heterogeneity of natural organic matter on the aggregation of fullerene nanoparticles in mono- and di-valent electrolyte solutions
(Journal article; Peer reviewed, 2015)Given the wide presence of heterogeneous natural organic matter (NOM) and metal ions (Naþ/Ca2þ/Mg2þ), as well as their significant role in governing nanoparticle stability in aqueous environments, it is of great importance ... -
Effects of nylon microplastic on feeding, lipid accumulation and moulting in a coldwater copepod
(Journal article; Peer reviewed, 2019-05-24)Microplastic debris is a pervasive environmental contaminant that has the potential to impact the health of biota, although its modes of action remain somewhat unclear. The current study tested the hypothesis that exposure ... -
Effects of outplanting time on growth, shedding and quality of Saccharina latissima (Phaeophyceae) in its northern distribution range
(Journal article; Peer reviewed, 2021-04-30)To reach the goal of large-scale seaweed cultivation in Norway and the rest of Europe, new knowledge about the commercially important kelp species Saccharina latissima is needed. Efforts to maximise biomass by outplanting ... -
Effects of powder properties on the 3D printing of BaTiO3 ceramic resins by stereolithography
(Peer reviewed; Journal article, 2023)Stereolithography is a layer-by-layer building fabrication technique enabling production of advanced ceramic 3D shapes that are not achievable by other methods. Critical parameters of stereolithography are associated with ... -
Effects of prior experience, gender, and age on trust in a banking chatbot with(out) breakdown and repair
(Chapter, 2023)Trust is an attitudinal construct that can be sensitive to prior experience, gender, and age. In our study, we explored how trust in a banking chatbot might be shaped by these user characteristics. Statistical analysis of ... -
Effects of produced water on pelagic marine organisms - Focus on the copepod Calanus finmarchicus
(SINTEF Ocean reports;OC2017 A-121, Research report, 2017-05)The main aim of this project was to provide a basis for assessing the potential health effects of produced water (PW) on the marine pelagic zooplankton Calanus finmarchicus in the field. This report describes three experiments ... -
The Effects of Pyrolysis Conditions and Feedstocks on the Properties and Gasification Reactivity of Charcoal from Woodchips
(Peer reviewed; Journal article, 2020)Pyrolysis conditions in charcoal production affect yields, properties, and further use of charcoal. Reactivity is a critical property when using charcoal as an alternative to fossil coal and coke, as fuel or reductant, in ... -
The effects of quench rate and pre-deformation on precipitation hardening in Al–Mg–Si alloys with different Cu amounts
(Peer reviewed; Journal article, 2014)The effects of quench rate after solution heat treatment in combination with 1% pre-deformation on precipitation hardening in three Al–Mg–Si alloys have been investigated by transmission electron microscopy and hardness ... -
Effects of reduced organic matter loading through membrane filtration on the microbial community dynamics in recirculating aquaculture systems (RAS) with Atlantic salmon parr (Salmo salar)
(Journal article; Peer reviewed, 2020-07-15)A key challenge in recirculating aquaculture systems (RAS) is the accumulation of particulate organic matter, especially the fine and colloidal fraction due to low removal efficiency of today's technology. The supply of ... -
Effects of reduced organic matter loading through membrane filtration on the microbial community dynamics in recirculating aquaculture systems (RAS) with Atlantic salmon parr (Salmo salar)
(Peer reviewed; Journal article, 2020)A key challenge in recirculating aquaculture systems (RAS) is the accumulation of particulate organic matter, especially the fine and colloidal fraction due to low removal efficiency of today's technology. The supply of ...