Show simple item record

dc.contributor.authorYang, Jiawei
dc.contributor.authorBao, Sarina
dc.contributor.authorAkhtar, Shahid
dc.contributor.authorTundal, Ulf
dc.contributor.authorTjøtta, Stig
dc.contributor.authorLi, Yanjun
dc.identifier.citationMetallurgical and Materials Transactions B. 2021, .en_US
dc.description.abstractThe addition of grain refiner particles in the aluminum melt is known to reduce the filtration efficiency of ceramic foam filter (CFF). In the present work, a systematic study on the influence of the addition level of Al-Ti-B master alloys and the inclusion level on the filtration performance of aluminum melt has been investigated by pilot-scale filtration tests using 50 PPi and 80 PPi filters. The inclusion level of the melt has been measured using both LiMCA and PoDFA. For 80 PPi CFF, the N20 inclusion (diameter larger than 20 μm) value in the post-filtrated melt does not increase when an ultra-high level of inclusions is introduced in the form of chips. For the melts with a low level of grain refiners (~ 0.5 kg/ton), the filtration performance of CFF is not affected by grain refiners, regardless of inclusion load. An addition of 2.0 kg/ton grain refiners reduces the filtration performance for melts with a high inclusion level, where post-filtration inclusions with the size of 15-20 µm were significantly increased. It is found, however, for the melts with an ultra-high inclusion load, the filtration performance of 80 PPi CFF is not affected by the grain refiner addition up to 2.0 kg/ton. The interactions between inclusions and grain refiner particles and the filtration mechanism have been studied by characterizing the spent filter and measuring the pressure drop during the filtration process. It is revealed that the strong adherence between oxide film with grain refiner particles dominates the grain refiner influence on the filtration performance of CFF. During the filtration process, oxide films have strong influences on the capturing of other inclusions such as oxide particles and TiB2 particles by the filter. A mechanism based on the interactions between oxide films and grain refiner particles is proposed to explain the CFF performance under the influence of grain refiner.en_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.titleThe Influences of Grain Refiner, Inclusion Level, and Filter Grade on the Filtration Performance of Aluminum Melten_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.rights.holderCopyright: The authorsen_US
dc.source.journalMetallurgical and Materials Transactions Ben_US
dc.relation.projectNorges forskningsråd: 256724en_US

Files in this item


This item appears in the following Collection(s)

Show simple item record

Navngivelse 4.0 Internasjonal
Except where otherwise noted, this item's license is described as Navngivelse 4.0 Internasjonal