Syngas Production, Storage, Compression and Use in Gas Turbines
Yang, Minjiao; Yang, Haiping; Zhou, Hewen; Yang, Qing; Zhao, Haibo; Gul, Eid; Khan, Mohsin Ali; Skreiberg, Øyvind; Wang, Liang; Chao, He; Bartocci, Pietro; Slopiecka, Katarzyna; Bidini, Gianni; Fantozzi, Francesco
Chapter, Peer reviewed
Accepted version
Permanent lenke
https://hdl.handle.net/11250/2753753Utgivelsesdato
2020Metadata
Vis full innførselSamlinger
- Publikasjoner fra CRIStin - SINTEF Energi [1614]
- SINTEF Energi [1730]
Originalversjon
Production of Biofuels and Chemicals with PyrolysisSammendrag
This chapter analyses syngas production through pyrolysis and gasification, its compression and its use in gas turbines. Syngas compression can be performed during or after thermal treatment processes. Important points are discussed related to syngas ignition, syngas explosion limit at high temperatures and high pressures and syngas combustion kinetics. Kinetic aspects influence ignition and final emissions which are obtained at the completion of the combustion process. The chapter is organized into four subsections, dealing with (1) innovative syngas production plants, (2) syngas compressors and compression process, (3) syngas ignition in both heterogeneous and homogeneous systems and (4) syngas combustion kinetics and experimental methods. Particular attention is given to ignition regions that affect the kinetics, namely systems that operate at temperatures higher than 1000 K can have strong ignition, whereas those operating at lower temperatures have weak ignition. Keywords: Pyrogas Pyrolysis Ignition Syngas Compression Gasification