dc.contributor.author | Wagner, Nils Peter | |
dc.contributor.author | Tron, Artur | |
dc.contributor.author | Tolchard, Julian R | |
dc.contributor.author | Noja, Gianluigi | |
dc.contributor.author | Bellmann, Martin Pawel | |
dc.date.accessioned | 2020-12-23T11:09:38Z | |
dc.date.available | 2020-12-23T11:09:38Z | |
dc.date.created | 2019-01-31T17:55:37Z | |
dc.date.issued | 2019 | |
dc.identifier.citation | Journal of Power Sources. 2019, 414 486-494. | en_US |
dc.identifier.issn | 0378-7753 | |
dc.identifier.uri | https://hdl.handle.net/11250/2720928 | |
dc.description.abstract | Silicon kerf waste from a photovoltaic silicon production process is assessed as an anode material for application as a lithium ion battery anode. In contrast to previous studies, the Si-kerf is used as-produced, with no chemical treatment or physical processing beyond solvent PEG removal. The as-produced Si-kerf performed as well as, or better than, previously reported Si-kerf anodes and is found to outperform a cleaned Si-kerf sample from blade sawing with a larger particle size. This highlights the advantage of the diamond wire cutting process, which yields relatively small particles. In half-cell testing, a cycle life >300 cycles at a capacity of 1000 mAh g−1 is achieved with high levels of FEC addition. Full-cell testing against an NMC 442 cathode resulted in specific capacities up to 150 mAh g−1 (NMC). A relatively high degree of lithium consumption arising from repeated SEI formation is present. It is concluded that pure Si-kerf is unsuitable for commercial application in Li-ion cells. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Elsevier | en_US |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/deed.no | * |
dc.subject | High capacity | en_US |
dc.subject | Waste recycling | en_US |
dc.subject | NMC Si Full-cell | en_US |
dc.subject | Lithium ion battery | en_US |
dc.subject | Kerf powder | en_US |
dc.subject | Silicon anode | en_US |
dc.title | Silicon anodes for lithium-ion batteries produced from recovered kerf powders | en_US |
dc.type | Peer reviewed | en_US |
dc.type | Journal article | en_US |
dc.description.version | acceptedVersion | en_US |
dc.rights.holder | This is the authors’ accepted and refereed manuscript to the article.This manuscript version is made available under the CC-BY-NC-ND 4.0 license | en_US |
dc.source.pagenumber | 486-494 | en_US |
dc.source.volume | 414 | en_US |
dc.source.journal | Journal of Power Sources | en_US |
dc.identifier.doi | 10.1016/j.jpowsour.2019.01.035 | |
dc.identifier.cristin | 1671291 | |
cristin.unitcode | 7401,80,62,0 | |
cristin.unitname | Bærekraftig energiteknologi | |
cristin.ispublished | true | |
cristin.fulltext | postprint | |
cristin.qualitycode | 1 | |