dc.contributor.author | Alcock, Benjamin | |
dc.contributor.author | Peters, Thijs | |
dc.contributor.author | Tiwari, Avinash | |
dc.date.accessioned | 2020-10-27T07:00:28Z | |
dc.date.available | 2020-10-27T07:00:28Z | |
dc.date.created | 2020-03-01T23:31:54Z | |
dc.date.issued | 2020 | |
dc.identifier.citation | Polymer testing. 2020, 82 . | en_US |
dc.identifier.issn | 0142-9418 | |
dc.identifier.uri | https://hdl.handle.net/11250/2685107 | |
dc.description.abstract | The effect of hot air exposure at 150ºC for up to 12 weeks (ca. 2000 h) on the properties of hydrogenated nitrile butadiene rubber (HNBR) compounds with varying degrees of carbon black content was investigated and re-ported in this paper. The composition of the HNBR was varied with 0, 10, 30 or 50 PHR carbon black. The tensile properties, hardness, density, solvent saturation swelling and carbon dioxide permeability of these specimens was investigated before and after exposure in a hot air oven. Correlations between these results are reported for the compounds considered in this work. These correlations illustrate how the changes in performance which would require test samples of specific geometries (such as tensile modulus or gas permeation) might in some cases be predicted by tests which do not require exact geometries (such as density or surface hardness), for the materials investigated in this paper. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Elsevier | en_US |
dc.rights | Navngivelse 4.0 Internasjonal | * |
dc.rights.uri | http://creativecommons.org/licenses/by/4.0/deed.no | * |
dc.subject | Carbon dioxide | en_US |
dc.subject | Permeability | en_US |
dc.subject | Diffusion | en_US |
dc.subject | Mechanical properties | en_US |
dc.subject | Ageing | en_US |
dc.subject | Elastomer | en_US |
dc.title | The effect of hot air exposure on the mechanical properties and carbon dioxide permeability of hydrogenated nitrile butadiene rubber (HNBR) with varying carbon black content | en_US |
dc.type | Peer reviewed | en_US |
dc.type | Journal article | en_US |
dc.description.version | publishedVersion | en_US |
dc.rights.holder | © 2020 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). | en_US |
dc.source.pagenumber | 10 | en_US |
dc.source.volume | 82 | en_US |
dc.source.journal | Polymer testing | en_US |
dc.identifier.doi | 10.1016/j.polymertesting.2019.106273 | |
dc.identifier.cristin | 1798783 | |
dc.relation.project | Norges forskningsråd: 234115 | en_US |
dc.source.articlenumber | 106273 | en_US |
cristin.ispublished | true | |
cristin.fulltext | original | |
cristin.qualitycode | 1 | |