Blar i COIN Project report på utgivelsesdato
Viser treff 41-60 av 76
-
Characterisation of concrete surfaces in Askimporten tunnel: COIN project report 45 - 2012
(COIN Projet report;45, Research report, 2012)This report gives the findings from a collaboration project between the Norwegian Public Roads Administration (NPRA) and the COIN FA 2.1 project managed by SINTEF Building and Infrastructure which was start in spring ... -
A preliminary study on using manufactured sand from Jelsa Quarry for the production of plastic concrete mixes. FA 2 Competitive constructions. SP 2.3 High quality manufactured sand for concrete
(COIN Project report;42, Research report, 2012) -
The effect of stabilization with either filler or chemical stabilizer on the surface quality of concrete elements. FA 2 Competitive constructions. SP 2.1 Robust highly flowable concrete
(COIN Project report;39, Research report, 2012)Three full scale wall elements were cast with three different concretes: an unstable SCC, one stabilized by adding filler, and one stabilized by adding chemical stabilizer. The aim of this study was to investigate the ... -
Rheology of matrix and SCC with different mineral fillers and admixtures : FA 2 Competitive constructions : SP 2.1 High quality manufactured sand for concrete
(COIN Project report;41, Research report, 2012) -
Ultra High Performance Fibre Reinforced Concrete (UHPFRC) – State of the art : FA 2 Competitive constructions : SP 2.2 Ductile high strength concrete
(COIN Project report;44, Research report, 2012) -
Physical properties of Norwegian mineral fillers investigated by different methods. FA 2 Competitive constructions. SP 2.1 High quality manufactured sand for concrete
(COIN Project report;43, Research report, 2012) -
Property development and cracking tendency in hardening concrete: Effect of cement type and fly ash content.FA 3 Technical performance. SP 3.1 Crackfree concrete structures
(COIN Project report;40, Research report, 2012)The concrete mix design influence the risk of thermal cracking in the hardening phase. Here the effect of binder composition has been investigated, where the variables are cement type and fly ash dosage. The fly ash was ... -
Fly ash – Limestone Synergy in Ternary Cements. FA 1 Environmentally friendly concrete. SP 1.1 Low carbon-footprint binder systems
(COIN Project report;46, Research report, 2013)The objective is to study the parameters of cements and fly ashes in combination with limestone that would optimize the synergistic chemical reaction between fly ash and limestone that leads to more bound water and thereby ... -
Round Robin Test program on Energy Absorption Capacity of Round Panels according to Norwegian Concrete Associations Publication no 7:2011
(COIN Project report;48, Research report, 2013)A Round-Robin test program (inter-laboratory study) on energy absorption capacity of round panels is presented. The panels were tested according to the procedure described in Norwegian Concrete Associations Publication no. ... -
Experimental study on flexural ductility in over-reinforced lightweight aggregate concrete beams : FA 3 Aesthetics and technical performance SP 3.3. Structural Performance
(COIN Project report;70, Research report, 2013)This study focuses on ductility of lightweight aggregate concrete (LWAC) in compression. The major disadvantage of LWAC is the brittleness in compression at the material level compared to normal density concrete. Requirements ... -
Stability of SCC – robustness for changes in water content and sand grading. FA 2 Competitive constructions. SP 2.1 Robust highly flowable concrete
(COIN Project report;47, Research report, 2013) -
Durability of mortar with calcined marl as pozzolan : FA 1 Environmentally friendly concrete : SP 1.1 Low carbon-footprint binder systems
(COIN Project report;49, Research report, 2013) -
Review report on dry and wet classification of filler materials for concrete : State-of-the-art : FA 2.3 High quality manufactured sand for concrete : SP 2.3.1 Filler technology
(COIN Project report;52, Research report, 2014)Due to depletion of natural sand resources in many central locations, it is an increased production and utilisation of crushed sand for concrete purposes. This crushed and processed sand is referred to as; Manufactured ... -
Brukermanual for BetongGUI – analyse og karakterisering av porer på betongoverflaten
(COIN Project report;51, Research report, 2014) -
Temperature Development in On-Site Curing BoxesTechnical performance : SP 3.1 Crack free concrete structures
(COIN Project report;54, Research report, 2014) -
Durability of mortar with calcined marl as pozzolan 2 year results : FA 1 Environmentally friendly concrete structures : SP 1.1 Binders with low emission and reduced consumption
(COIN Project report;50, Research report, 2014) -
Rheology of blended cements with superplasticizers : FA: Environmentally friendly concrete structures : SP 1.1 Binders with low emission and reduced resource consumption
(COIN Project report;58, Research report, 2015) -
Summary report. Production of high quality manufactured aggregate for concrete
(COIN Project report;76, Research report, 2015)Preface. This study has been carried out within COIN ‐ Concrete Innovation Centre ‐ one of presently 14 Centres for Research based Innovation (CRI), which is an initiative by the Research Council of Norway. The main objective ... -
Beregning av rissrisiko CrackTeSt COIN : FA: Technical performance : SP 3.1 Crack free concrete structures
(COIN Project report;57, Research report, 2015) -
Structural FRC – Design approach and experimental results. FA 2 Competitive construction. SP 2.2 Ductile high tensile strength concrete
(COIN Project report;66, Research report, 2015)