Blar i SINTEF Proceedings på emneord "VDP::Teknologi: 500"
Viser treff 1-20 av 222
-
14th International Conference on CFD in 6 Oil & Gas, Metallurgical and Process Industries SINTEF, Trondheim, Norway, October 12–14, 2020
(SINTEF Proceedings;6, Book; Peer reviewed, 2020) -
A coordinated control to improve energy performance for a building cluster with energy storage, EVs, and energy sharing
(SINTEF Proceedings;5, Chapter; Peer reviewed; Conference object, 2020)Existing studies have developed some advanced controls for energy storage system charging/discharging in a building cluster (enabling PV power sharing among different buildings), which can effectively improve the aggregated ... -
A field study of indoor air quality and overheating in newly built primary classrooms in low-carbon UK schools
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)School buildings confront complex design and layout problems due to needing to respond to a wide range of environmental factors while accommodating intermittent high-density occupancy. Despite current policy-driven emphases ... -
A method for determining the time-dependent indoor CO2 concentration to evaluate air hygiene
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)This paper deals with new ways to describe and assess indoor air CO2-levels to provide a sufficient clarity. Besides common illustrations of measured or calculated CO2 concentrations over a certain period of time different ... -
A new simplified daylight evaluation tool, description and validation against the standard method of EN 17037
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)A new daylight evaluation tool using a simplified assessment method to determine the daylight quantity provided to a typical room was developed. Its calculation method is based on a set of formulas integrating the main ... -
A top-down digital mapping of spatial energy use for municipality-owned buildings: a case study in Borlänge, Sweden
(SINTEF Proceedings;5, Chapter; Peer reviewed; Conference object, 2020)Urban energy mapping plays a crucial role in benchmarking the energy performance of buildings for many stakeholders. This paper studies a set of buildings in the city of Borlänge, Sweden, owned by the municipality. The aim ... -
Adapting to future climate change by integration of Phase Change Materials (PCMs) into the building envelope: a case study in Stockholm, Sweden
(SINTEF Proceedings;5, Chapter; Peer reviewed, 2020)This paper presents a numerical investigation on the effectiveness of phase change materials (PCMs) wall implementation as building refurbishment solution, under both historical and future climate conditions. Specifically, ... -
Adolescents’ thermal comfort and skin temperature compared to young adults
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)This study compared thermal comfort and skin temperature of adolescents and young adults to analyze the difference in their thermal responses. In a climate chamber with increasing air temperature from 18 ℃ to 32 ℃, skin ... -
Aerosol Emission at a Post Combustion CO2 Capture Plant at Twence (Wte Facility)
(SINTEF Proceedings;7, Chapter; Peer reviewed; Conference object, 2021)Amine emissions in post combustion CO2 capture (PCC) have a significant impact on process economics and the environment. The volatile nature of amine-based solvents in combination with aerosol formation can lead to amine ... -
An empirical study of occupants' evaluation of short-term combined thermal, visual, and acoustic indoor-environmental exposure
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)Recently, more attention is being paid to human sensation and perception processes under multidomain indoor-environmental exposure situations. Despite the existing body of research in this area, many more studies must be ... -
An overview of transparent and translucent 3D-printed façade prototypes and technologies
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)3D-printing has transformed traditional manufacturing by enabling the fabrication of individually designed complex systems. The building’s façade is one of the most challenging systems because it affects the control of the ... -
Analyses of thermal storage capacity and smart grid flexibility in Danish single-family houses
(SINTEF Proceedings;5, Chapter; Peer reviewed; Conference object, 2020)This paper describes theoretical analyses of typical detached Danish single family houses’ ability to provide thermal capacity and thus flexibility, in an electricity grid, if they were heated by individual heat pumps. A ... -
Analysis of the effect of indoor environment on pupils’ health in one Norwegian school during COVID-19 pandemic
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)The aim of this project is to investigate and predict the quantified effect of indoor environment on pupils’ health in schools in Norway during the COVID-19 pandemic. The results are based on field measurements of the ... -
Analysis of the interfacial mixing in the gravity-driven counterflow through a large vertical opening using Large Eddy Simulation
(SINTEF Proceedings;5, Chapter; Peer reviewed; Conference object, 2020)The study of natural convection flows in multizone enclosures is a topic of great importance due to its direct influence on room air circulation patterns, distribution of indoor air contaminants, and thermal comfort inside ... -
Application of Coupling of CFD and Human and Clothing Thermal Response in Ceiling Mounted Localized Air Distribution Systems in Winter Conditions
(SINTEF Proceedings;5, Chapter; Peer reviewed; Conference object, 2020)This work presents and applies a numerical model, developed by the authors in the last years, that considers the coupling of the CFD (Computational Fluids Dynamics) and HCTR (Human and Clothing Thermal Response). The ... -
Artificial Intelligence for Well Integrity Monitoring Based on EM Data
(SINTEF Proceedings;7, Chapter; Peer reviewed; Conference object, 2021)Monitoring of integrity of plugged and abandoned (P&A'ed) wells is of interest for the oil and gas industry and for CO2 storage. The purpose of this study is to develop artificial intelligence (AI)-based approaches to ... -
Aspen Hysys and Aspen Plus Simulations for Amine Based Absorption Process Compared to Results from Experiments in CO2-RIG
(SINTEF Proceedings;4, Chapter; Conference object; Peer reviewed, 2019)In this study, equilibrium-based and rate-based simulations in Aspen HYSYS and Aspen Plus were performed to compare the removal efficiency and physical properties of density and viscosity in a CO2 absorption column. The ... -
Assessing the indoor air quality of natural-ventilated bedrooms in renovated Norwegian houses using detailed field measurements
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)The objective of this work is to investigate the indoor environment in bedrooms ventilated by window opening during night-time. How window opening behaviour affects indoor air quality (IAQ), and how window opening behaviour ... -
Association between physiological signal from wearable device and alertness of office workers
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)Through physiological signals, detecting the changes of occupants' physical and psychological aspects is possible, and wearable devices have enabled measurement in dailylife. In this study, to see whether the wearable ... -
Better building operation, maintenance and well-being in apartments with smart indoor climate meters
(SINTEF Proceedings;9, Chapter; Peer reviewed; Conference object, 2021)The justification of energy consumption in dwellings is to maintain comfortable and healthy indoor climate. Sufficient air exchange and comfortable temperatures protect building structures against mould growth caused by ...