• 18F-FACBC PET/MRI in diagnostic assessment and neurosurgery of gliomas 

      Karlberg, Anna Maria; Berntsen, Erik Magnus; Johansen, Håkon; Skjulsvik, Anne Jarstein; Reinertsen, Ingerid; Hong, Yan Dai; Xiao, Yiming; Rivaz, Hassan; Borghammer, Per; Solheim, Ole; Eikenes, Live (Peer reviewed; Journal article, 2019)
      Purpose: This pilot study aimed to evaluate the amino acid tracer 18F-FACBC with simultaneous PET/MRI in diagnostic assessment and neurosurgery of gliomas. Materials and Methods: Eleven patients with suspected primary ...
    • 1D modelling of membrane-assisted chemical looping reforming 

      Francisco Morgado, Joana; Cloete, Schalk Willem Petrus; Morud, John; Gurker, Thomas; Quinta-Ferreira, Rosa; Amini, Shahriar (Peer reviewed; Journal article, 2017)
      Membrane-assisted chemical looping reforming (MA-CLR) has been proposed as an alternative to the conventional CLR technology. In this work, a non-isothermal 1D model is used to simulate the MA-CLR fuel reactor. The effect ...
    • 2-Naphthol Impregnation Prior to Steam Explosion Promotes LPMO-Assisted Enzymatic Saccharification of Spruce and Yields High-Purity Lignin 

      Hansen, Line Degn; Østensen, Martin; Arstad, Bjørnar; Tschentscher, Roman; Eijsink, Vincent; Horn, Svein Jarle; Varnai, Aniko (Peer reviewed; Journal article, 2022)
      The recent discovery that impregnation with a carbocation scavenger may improve the enzymatic saccharification of steam-exploded softwood has brought a softwood-based biorefinery closer to reality. However, the nature of ...
    • 25 years of field exposure of pre-cracked concrete beams; combined impact of spacers and cracks on reinforcement corrosion 

      Geiker, Mette Rica; Danner, Tobias; Michel, Alexander; Belda Revert, Andres; Linderoth, Oskar; Hornbostel, Karla (Peer reviewed; Journal article, 2021)
      The state of corrosion of three pre-cracked concrete beams was investigated after 25 years of marine exposure (atmospheric, tidal and submerged). The influence of inadequate plastic spacers was found to overrule the possible ...
    • 3-D Snake Robot Motion: Nonsmooth Modeling, Simulations, and Experiements 

      Transeth, Aksel Andreas (Journal article; Peer reviewed, 2008)
      A nonsmooth (hybrid) 3-D mathematical model of a snake robot (without wheels) is developed and experimentally validated in this paper. The model is based on the framework of nonsmooth dynamics and convex analysis that ...
    • 3D Basin-Scale Groundwater Flow Modeling as a Tool for Geothermal Exploration: Application to the Geneva Basin, Switzerland-France 

      Alcanié, Marion; Collignon, Marine; Møyner, Olav; Lupi, Matteo (Peer reviewed; Journal article, 2021)
      Switzerland promotes the energy transition by supporting the development of geothermal energy. We built a 3D basin-scale fluid flow model of the Geneva Basin, France-Switzerland, using the open-source Matlab Reservoir ...
    • 3D Integration technology: Status and application development 

      Ramm, Peter; Klumpp, Armin; Weber, Josef; Lietaer, Nicolas; Taklo, Maaike M. Visser; de Raedt, W.; Fritzsch, Thomas; Couderc, Pascal (Journal article; Peer reviewed, 2010)
      As predicted by the ITRS roadmap, semiconductor industry development dominated by shrinking transistor gate dimensions alone will not be able to overcome the performance and cost problems of future IC fabrication. Today ...
    • 3D modelling of β'' in Al-Mg-Si: towards an atomistic level ab initio based examination of a full precipitate enclosed in a host lattice 

      Ehlers, Flemming J H; Dumoulin, Stephane; Holmestad, Randi (Peer reviewed; Journal article, 2014)
      We extend a first principles based hierarchical multi-scale model scheme for describing a fully coherent precipitate in a host lattice to 3D simulations. As our test system, the needle-shaped main hardening Al–Mg–Si alloy ...
    • 3D Printed PEI Containing Adsorbents Supported by Carbon Nanostructures for Post-combustion Carbon Capture From Biomass Fired Power Plants 

      Krishnamurthy, Shreenath; Blom, Richard; Andreassen, Kari Anne; Middelkoop, Vesna; Rombouts, Marleen; Borras, Adolfo Benedito (Peer reviewed; Journal article, 2021)
      Processes that utilize solid adsorbents to capture CO2 are promising alternatives to state-of-art Amine based technologies for capturing CO2 from large point sources. Although the energy needs of solid sorbent-based processes ...
    • 3D Radiation Detectors: Charge Collection Characterisation and Applicability of Technology for Microdosimetry 

      Tran, Linh T.; Prokopovich, Dale A.; Petasecca, Marco; Lerch, Michael L.F.; Kok, Angela; Summanwar, Anand; Hansen, Thor-Erik; Da Via, Cinzia; Reinhard, Mark I.; Rosenfeld, Anatoly B. (Journal article; Peer reviewed, 2014)
      A study of charge collection in SINTEF 3D active edge silicon detectors was carried out at ANSTO using Ion Beam InducedCharge (IBIC) technique.An IBIC study has shown that several different geometries of 3D detectors have ...
    • 3D silicon detectors for neutron imaging applications 

      Povoli, Marco; Kok, Angela Chun Ying; Koybasi, Ozhan; Getz, Michael Norderhaug; O'Neill, George; Roehrich, Dieter; Pedersen, Henrik; Monakhov, Eduard; Birch, Jens; Choolakkal, Arun Haridas; Kanaki, Kalliopi; Lai, Chung-Chuan; Hall-Wilton, Richard; Slavicek, Tomas; Llamas-Jansa, Isabel (Peer reviewed; Journal article, 2023)
      Neutron detection is of great importance in many fields spanning from scientific research, to nuclear science, and to medical application. The development of silicon-based neutron detectors with enhanced neutron detection ...
    • 3D ultrasound reconstruction algorithms from analog and digital data 

      Solberg, Ole Vegard; Lindseth, Frank; Bø, Lars Eirik; Muller, Sebastien; Meland, Janne Beate Lervik; Tangen, Geir Arne; Hernes, Toril A. Nagelhus (Journal article; Peer reviewed, 2011)
    • 3D-printed polyamide structures coated with TiO2 nanoparticles, towards a 360-degree rotating photocatalytic reactor 

      Grandcolas, Mathieu; Lind, Anna Maria (Peer reviewed; Journal article, 2022)
      3D-printed polyamide structures coated with TiO2 nanoparticles were obtained by a simple impregnation method. This novel type of 3D reactor was evaluated for its photocatalytic activity towards the degradation of methylene ...
    • 3D-Printing Technology in Construction: Results from a Survey 

      Olsson, Nils; Shafqat, Ali; Arica, Emrah; Økland, Andreas (Emerald Reach Proceedings Series, Chapter; Conference object; Peer reviewed, 2019)
      Purpose – The purpose of this paper is to study the introduction of 3D-printing of concrete in the construction sector. Design/Methodology/Approach – A survey was conducted to collect professional view on ongoing innovations ...
    • 6D pose estimation for subsea intervention in turbid waters 

      Mohammed, Ahmed; Kvam, Johannes; Thielemann, Jens T; Haugholt, Karl H.; Risholm, Petter (Peer reviewed; Journal article, 2021)
      Manipulation tasks on subsea instalments require extremely precise detection and localization of objects of interest. This problem is referred to as “pose estimation”. In this work, we present a framework for detecting and ...
    • A 2.5-D Integrated Data Logger for Measuring Extreme Accelerations 

      Gakkestad, Jakob; Sollund, Tomas; Dalsjø, Per; Tveit, Bjørn; Taklo, Maaike Margrete Visser; Wright, Daniel Nilsen; Helland, Susanne; Kristiansen, Helge; Johnsen, Christian (Journal article; Peer reviewed, 2017)
      A very compact and rugged 2.5-D integrated data logger has been built and tested. The data logger is capable of measuring accelerations exceeding 70 000 g. Microcontroller and flash memory as bare dies have been mounted ...
    • A climate services perspective on Norwegian stormwater-related databases 

      Labonnote, Nathalie; Hauge, Åshild Lappegard; Sivertsen, Edvard (Journal article; Peer reviewed, 2019)
      Floods and stormwater events are the costliest natural catastrophes. Costs are expected to increase due to urbanization and climate change. Mitigation is needed. Different stakeholders with different motivations unfortunately ...
    • A collaborative chain out of phase 

      Paulsen, Bård; Romøren, Tor Inge; Grimsmo, Anders (Journal article; Peer reviewed, 2013)
      Introduction: The aim of this study is to explore the obstacles to collaborations between nurses in hospital and municipal care in the discharge of hospital patients who need continuing care. Methods: First, we conducted ...
    • A comparative analysis of the properties of regulated promoter systems commonly used for recombinant gene expression in Escherichia coli 

      Balzer, Simone; Kucharova, Veronika; Megerle, Judith; Lale, Rahmi; Brautaset, Trygve; Valla, Svein (Journal article; Peer reviewed, 2013)
      Background Production of recombinant proteins in bacteria for academic and commercial purposes is a well established field; however the outcomes of process developments for specific proteins are still often unpredictable. ...
    • A Comparison of Single- and Multi-parameter Wave Criteria for Accessing Wind Turbines in Strategic Maintenance and Logistics Models for Offshore Wind Farms 

      Sperstad, Iver Bakken; Halvorsen-Weare, Elin Espeland; Hofmann, Matthias; Nonås, Lars Magne; Stålhane, Magnus; Wu, MingKang (Journal article; Peer reviewed, 2014)
      Different vessel types for transferring technicians for maintenance and inspection of offshore wind farms are often evaluated and compared by their limiting significant wave height for accessing the wind turbines. The ...