Browsing Publikasjoner fra CRIStin - SINTEF Energi by Title
Now showing items 993-1012 of 1633
-
A Monte Carlo sampling procedure for rare events applied to power system reliability analysis
(Chapter; Peer reviewed, 2023)This paper presents a semi-analytical Monte Carlo method for rare event sampling applied to power system reliability analyses, which combines traditional Monte Carlo-based methods with simplifications from analytical ... -
Mooring Analysis of a Dual-Spar Floating Wind Farm With a Shared Line
(Peer reviewed; Journal article, 2021)Wind farms with shared mooring lines have the potential to reduce mooring costs. However, such wind farms may encounter complex system dynamics because adjacent wind turbines are coupled. This paper presents an analysis ... -
Moving toward the low-carbon hydrogen economy: Experiences and key learnings from national case studies
(Peer reviewed; Journal article, 2022)The urgency to achieve net-zero carbon dioxide (CO2) emissions by 2050, as first presented by the IPCC special report on 1.5°C Global Warming, has spurred renewed interest in hydrogen, to complement electrification, for ... -
MPC-based control structure for high-power charging stations capable of providing ancillary services
(Peer reviewed; Journal article, 2024)The adoption of more electric vehicles (EVs) is going to pose some challenges for the grid due to the increase in demand for high-power charging. These issues will get further exacerbated with energy production moving from ... -
MPC-based Voltage Control with Reactive Power from High-Power Charging Stations for EVs
(Chapter; Peer reviewed, 2021)The recent development of EVs with high-capacity batteries and high charging power capabilities leads to an increased demand for fast-charging stations (FCS). However, FCS can cause power quality issues such as voltage ... -
MSW in a Circular Economy: 2020 - 2035 Scenarios for the City of Oslo, Norway
(Peer reviewed; Journal article, 2021)The unfolding of Circular Economy principles will have consequences on the generation rate, amount, and composition of Municipal Solid Waste (MSW) as well as the preferred methods to treat them. In this work, four plausible ... -
Multi Ejector and pivoting-supported R744 application with AC for supermarkets
(Chapter; Peer reviewed, 2021)CO2 refrigeration units are gaining market shares thanks to the ability to provide an energy efficient performance for industrial and commercial refrigeration applications in any climate. As with all the applications, the ... -
Multi-Conductor Cable Modeling With Inclusion of Measured Coaxial Wave Propagation Characteristics
(Peer reviewed; Journal article, 2023)The prediction of voltage stresses in transformer and machine windings requires the ability to calculate pulse propagation effects on the feeding cable with sufficient accuracy. The use of commonly available cable models ... -
Multi-criteria analyses of two solvent and one low-temperature concepts for acid gas removal from natural gas
(Journal article; Peer reviewed, 2014)This paper evaluates three acid gas removal concepts studied in the project “A Green Sea”. Two solvent concepts (aMDEA/MDEA and Selexol) and a low-temperature concept are modelled and assessed, taking different raw natural ... -
Multi-criteria Analysis of Two CO2 Transport Technologies
(Peer reviewed; Journal article, 2013)This paper illustrates a methodology for multi-criteria analysis of CCS chains by comparing two transports technologies for a case study in which 10 Mt/y of CO2 from an industrial cluster are transported over 500 km by ... -
Multi-criteria studies and assessment supporting the selection of locations and technologies used in co2-egs systems
(Peer reviewed; Journal article, 2021)The paper describes application of the cross-impact method in the process of selecting locations and technologies used in a geothermal system based on energy accumulated in a dry rock formation, where CO2 is used as the ... -
Multi-Ejector Concept: A Comprehensive Review on its Latest Technological Developments
(Journal article; Peer reviewed, 2019)The adoption of the EU F-Gas Regulation 517/2014 and the resulting development of the multi-ejector concept have led carbon dioxide to take center stage as the sole refrigerant (R744) in several applications. Therefore, a ... -
Multi-Market Price Forecasting in Hydro-Thermal Power Systems
(Chapter; Peer reviewed, 2018)This paper presents a framework for price forecasting in hydro-thermal power systems. The framework consists of a long-term strategic and a short-term operational model. The strategic model provides the end-of-horizon ... -
Multi-Objective Thermal Optimization Based on Improved Analytical Thermal Models of a 30 kW IPT System for EVs
(Peer reviewed; Journal article, 2022)Thermal design is particularly important for high-power and compact inductive power transfer (IPT) systems having limited surface area for heat dissipation. This paper presents the thermal design and optimization of a 30 ... -
Multi-stage membrane processes for CO2 capture from cement industry
(Peer reviewed; Journal article, 2014)Capture conditions for cement plant flue gas differ substantially from other industrial flue gases due to the high partial pressure of CO2, presenting an opportunity for polymeric membranes to compete with other capture ... -
Multi-stress Cyclic Testing of Roebel Stator Bars for Hydropower
(Peer reviewed; Journal article, 2022)A multi-stress test rig was built to investigate the effect of many start-stops (load cycling) on hydropower generator insulation. To emulate real-life start-stops, stator bars were subjected to accelerated temperature ... -
Multidisciplinary design analysis and optimisation of a reference offshore wind plant
(Journal article; Peer reviewed, 2018)Motivated by the need to develop reference wind energy systems for optimisation and technology assessment studies, the International Energy Agency Wind Task 37 on Wind Energy Systems Engineering is developing a reference ... -
Multidisciplinary optimization of a Francis turbine runner
(Peer reviewed; Journal article, 2022)A fully automated multi-disciplinary design optimization procedure for a Francis turbine runner has been developed in a previous task of the Horizon2020-HydroFlex project. The design optimization was limited to blade design, ... -
Multiejector CO2 cooling system with evaporative gascooler for a supermarket application in tropical regions
(Peer reviewed; Journal article, 2021)In the present study, the performance of a 33 kW multiejector trans-critical CO2 cooling system is experimentally evaluated for a supermarket application with/without internal heat exchanger and evaporative cooling. In ...