Now showing items 5132-5151 of 8725

    • Multi-modal characterization of vasculature and nanoparticle accumulation in five tumor xenograft models 

      Sulheim, Einar; Kim, Jana; van Wamel, Annemieke; Kim, Eugene; Snipstad, Sofie; Vidic, Igor; Grimstad, Ingeborg; Widerøe, Marius; Torp, Sverre Helge; Lundgren, Steinar; Waxman, David J.; Davies, Catharina de Lange (Peer reviewed; Journal article, 2018)
      Preclinical research has demonstrated that nanoparticles and macromolecules can accumulate in solid tumors due to the enhanced permeability and retention effect. However, drug loaded nanoparticles often fail to show increased ...
    • A multi-objective optimisation framework to design membrane-based energy recovery ventilation for low carbon buildings 

      Liu, Peng; Mathisen, Hans Martin; Justo Alonso, Maria; Halfvardsson, Anneli (Peer reviewed; Journal article, 2023)
      Membrane energy exchangers (MEEs) are increasingly being studied and utilized to contribute to realising energy-efficient building services and providing satisfactory indoor environments. The performance of MEEs has been ...
    • Multi-objective parametric study of a wooden window 

      Gradeci, Klodian; Labonnote, Nathalie; Grynning, Steinar (CESBP 2019, Conference object; Journal article; Peer reviewed, 2019)
      The aim of this study is to conduct a multi-objective parametric study by simultaneously analysing the thermal and structural performance of a wood-frame window. The finite element simulation program COMSOL is used to carry ...
    • Multi-Objective Thermal Optimization Based on Improved Analytical Thermal Models of a 30 kW IPT System for EVs 

      Zhang, Baokun; Deng, Junjun; Wang, Wenbo; Li, Lantian; Wang, Zhenpo; Wang, Shuo; Guidi, Giuseppe (Peer reviewed; Journal article, 2022)
      Thermal design is particularly important for high-power and compact inductive power transfer (IPT) systems having limited surface area for heat dissipation. This paper presents the thermal design and optimization of a 30 ...
    • Multi-Product Dividing Wall Columns: A Simple and Effective Assessment and Conceptual Design Procedure 

      Halvorsen, Ivar Johan; Skogestad, Sigurd; Dejanovic, Igor; Matijasevic, Ljubica; Olujic, Zarko (Journal article; Peer reviewed, 2011)
      The objective of this paper is to further exploit and demonstrate the potential benefits of a V-min diagram based analysis, using a fifteen component feed mixture as base case. Detailed explanations are given on how to ...
    • A multi-pulse ultrasound technique for imaging of thick-shelled microbubbles demonstrated in vitro and in vivo 

      Berg, Sigrid; Eggen, Siv; Caidahl, Kenneth; Dähne, Lars; Hansen, Rune (Peer reviewed; Journal article, 2022)
      Contrast enhanced ultrasound is a powerful diagnostic tool and ultrasound contrast media are based on microbubbles (MBs). The use of MBs in drug delivery applications and molecular imaging is a relatively new field of ...
    • Multi-purpose structured catalysts designed and manufactured by 3D printing 

      Lind, Anna; Vistad, Ørnulv Bjørnsson; Sunding, Martin Fleissner; Andreassen, Karin; Cavka, Jasmina Hafizovic; Grande, Carlos Adolfo (Peer reviewed; Journal article, 2020)
      This work presents an example of the design and manufacture capabilities that 3D printing can introduce in catalysis. A multi-purpose catalyst, with fast heat and mass transfer and low-pressure drop has been designed and ...
    • Multi-Robot Exploration of Underwater Structures 

      Xanthidis, Marios; Joshi, Bharat; O'Kane, Jason M.; Rekleitis, Ioannis (Peer reviewed; Journal article, 2022)
      This paper discusses a novel approach for the exploration of an underwater structure. A team of robots splits into two roles: certain robots approach the structure collecting detailed information (proximal observers) while ...
    • Multi-scale Modelling of Titanium Diboride Degradation Using Crystal Elasticity Model and Density Functional Theory 

      Saai, Afaf; Wang, Zhaohui; Pezzotta, Micol; Friis, Jesper; Ratvik, Arne Petter; Vullum, Per Erik (The Minerals, Metals & Materials Series;2367-1181, Peer reviewed; Journal article, 2018)
      Titanium diboride (TiB2) is regarded as the most promising material to be used as inert cathodes in the electrochemical reduction of alumina to aluminium metal. TiB2 is well known as a ceramic material with high strength ...
    • Multi-scale observation of hydrogen-induced, localized plastic deformation in fatigue-crack propagation in a pure iron 

      Ogawa, Yuhei; Birenis, Domas; Matsunaga, Hisao; Thøgersen, Annett; Prytz, Øystein; Takakuwa, Osamu; Yamabe, Junichiro (Peer reviewed; Journal article, 2017)
      In order to study the influence of hydrogen on plastic deformation behavior in the vicinity of the fatigue crack-tip in a pure iron, a multi-scale observation technique was employed, comprising electron channeling contrast ...
    • Multi-scale observation of hydrogen-induced, localized plastic deformation in fatigue-crack propagation in a pure iron 

      Ogawa, Yuhei; Birenis, Domas; Matsunaga, Hisao; Thøgersen, Annett; Prytz, Øystein; Takakuwa, Osamu; Yamabe, Junichiro (Peer reviewed; Journal article, 2017)
      In order to study the influence of hydrogen on plastic deformation behavior in the vicinity of the fatigue crack-tip in a pure iron, a multi-scale observation technique was employed, comprising electron channeling contrast ...
    • Multi-Sine EIS for Early Detection of PEMFC Failure Modes 

      Fortin, Patrick; Gerhardt, Michael Robert; Ulleberg, Øystein; Zenith, Federico; Holm, Thomas (Peer reviewed; Journal article, 2022)
      Electrochemical impedance spectroscopy (EIS) is a powerful technique that can be used to detect small changes in electrochemical systems and subsequently identify the source of the change. While promising, analysis is often ...
    • Multi-stage membrane processes for CO2 capture from cement industry 

      Lindqvist, Karl; Roussanaly, Simon; Anantharaman, Rahul (Peer reviewed; Journal article, 2014)
      Capture conditions for cement plant flue gas differ substantially from other industrial flue gases due to the high partial pressure of CO2, presenting an opportunity for polymeric membranes to compete with other capture ...
    • Multi-stakeholder initiatives and decarbonization in the European food supply chain 

      Moreira-Dantas, Ianna Raissa; Martínez-Zarzoso, Inmaculada; de Araujo, Maria Luísa Fernandes; Evans, Judith; Foster, Alan; Wang, Xinfang; Thakur, Maitri; Jafarzadeh, Sepideh; Pujol Martin, Marta (Peer reviewed; Journal article, 2023)
      The European Green Deal is a political milestone aiming to promote a carbon-neutral economy in the European Union. Decarbonizing the complex food sector requires the unified interaction among effective climate policies, ...
    • Multi-stress Cyclic Testing of Roebel Stator Bars for Hydropower 

      Eberg, Espen; Kantar, Emre; Aakre, Torstein Grav (Peer reviewed; Journal article, 2022)
      A multi-stress test rig was built to investigate the effect of many start-stops (load cycling) on hydropower generator insulation. To emulate real-life start-stops, stator bars were subjected to accelerated temperature ...
    • Multi-timescale microscopy methods for the characterization of fluorescently-labeled microbubbles for ultrasound-triggered drug release 

      Nawijn, Charlotte; Segers, Tim; Lajoinie, Guillaume; Mørch, Ýrr Asbjørg; Berg, Sigrid; Snipstad, Sofie; Davies, Catharina de Lange; Versluis, Michel (Peer reviewed; Journal article, 2021)
      Microbubble contrast agents hold great promise for drug delivery applications with ultrasound. Encapsulating drugs in nanoparticles reduces systemic toxicity and increases circulation time of the drugs. In a novel approach ...
    • Multichannel Residual Cues for Fine-Grained Classification in Wireless Capsule Endoscopy 

      Vats, Anuja; Raja, Kiran; Pedersen, Marius; Mohammed, Ahmed Kedir (Peer reviewed; Journal article, 2022)
      Early diagnosis of gastrointestinal pathologies leads to timely medical intervention and prevents disease development. Wireless Capsule Endoscopy (WCE) is used as a non-invasive alternative for gastrointestinal examination. ...
    • Multicultural workplaces: A state of the art study of the Norwegian construction industry 

      Wasilkiewicz, Kinga; Kilskar, Stine Skaufel; Øren, Anita; Tinmannsvik, Ranveig Kviseth; Kilanowska, Iwona (Chapter, 2018)
      A multi-method case study, including interviews, a survey and participatory observations, was undertaken to describe opportunities and challenges related to multicultural workplaces in the Norwegian construction industry, ...
    • A Multidisciplinary Approach for Improving Resource Efficiency in the Indian Surimi Supply Chain 

      Thakur, Maitri; Cowan, Emily Christine; Widell, Kristina Norne; Mozuraityte, Revilija; Slizyte, Rasa (Peer reviewed; Journal article, 2021)
      With the world population set to approach an estimated 9 billion by 2050, against a background of finite natural resources, we need renewable biological resources for securing healthy food and animal feed to meet the ...
    • Multidisciplinary design analysis and optimisation of a reference offshore wind plant 

      Perez-Moreno, S. Sanchez; Dykes, K.; Merz, Karl Otto; Zaaijer, M.B. (Journal article; Peer reviewed, 2018)
      Motivated by the need to develop reference wind energy systems for optimisation and technology assessment studies, the International Energy Agency Wind Task 37 on Wind Energy Systems Engineering is developing a reference ...