Blar i Publikasjoner fra CRIStin på tittel
Viser treff 4023-4042 av 8725
-
Influence of natural aging and ramping before artificial aging on the microstructure of two different 6xxx alloys
(Peer reviewed; Journal article, 2022)In this study the effect of a ramp up to artificial aging (AA) temperature in combination with natural aging (NA) was analyzed for two different industrial aluminium alloys. The alloys differ in their Mg/Si ratio as well ... -
Influence of nitrogen limitation on lipid accumulation and EPA and DHA content in four marine microalgae for possible use in aquafeed
(Journal article; Peer reviewed, 2019-03-12)Microalgae are regarded as a promising alternative that can replace fishmeal and fish oil in aquaculture. Under N-limitation, many microalgae species change their carbon storage patterns in favor of neutral lipids (NLs) ... -
The influence of parent austenite characteristics on the intervariant boundary network in a lath martensitic steel
(Peer reviewed; Journal article, 2022)The influence of the parent austenite deformation state on the intervariant boundary network (i.e., population, plane orientation, and connectivity) of a lath martensitic microstructure was investigated using conventional ... -
Influence of patient-specific rehearsal on operative metrics and technical success for endovascular aneurysm repair
(Peer reviewed; Journal article, 2020)Introduction: Patient-specific rehearsal (PsR) is a recent technology within virtual reality (VR) simulation that lets the operators train on patient-specific data in a simulated environment prior to the procedure. ... -
The influence of pressboard parallel to the field on AC-breakdown in oil gaps
(SINTEF Energi. Rapport;, Research report, 1983) -
Influence of rheology on the pumpability of mortar : P 2 Improved construction technology SP 2.4 Workability
(COIN Project report;21, Research report, 2010)The rheological and material parameters determining the pumpability of fresh self-compacting mortar have been studied in full-scale (70 m Ø 50 mm rubber hose and screw pump with max capacity 7 m3/h). Concrete pressure ... -
Influence of sampling accuracy on augmented reality for laparoscopic image-guided surgery
(Peer reviewed; Journal article, 2020)Purpose: This study aims to evaluate the accuracy of point-based registration (PBR) when used for augmented reality (AR) in laparoscopic liver resection surgery. Material and methods: The study was conducted in three ... -
Influence of soak time on catch performance of commercial creels targeting Norway lobster (Nephrops norvegicus) in the Mediterranean Sea
(Journal article; Peer reviewed, 2017-09-15)Mass transfer between bubbles and seawater is an important mechanism when determining how much gas reaches the atmosphere from gas sources at the seabed. The mass transfer coefficient is a governing parameter for the ... -
Influence of space heating distribution systems on the energy flexibility of Norwegian residential buildings
(SINTEF Proceedings;5, Chapter; Peer reviewed; Conference object, 2020)This work evaluates the influence of the heating distribution system on the energy flexibility of highly insulated single-family residential buildings. The behavior of three different systems (air heating, radiator heating, ... -
Influence of strain rate and temperature on the mechanical behaviour of rubber-modified polypropylene and cross-linked polyethylene
(Journal article; Peer reviewed, 2017) -
Influence of substitution of water by organic solvents in amine solutions on absorption of CO2
(Peer reviewed; Journal article, 2018)Aqueous amine solutions are the most used solvents for chemical absorption of CO2. Substituting part of the water by organic solvents in aqueous amine solutions aims to take advantage of the lower partial pressure and ... -
Influence of surfactants on the electrohydrodynamic stretching of water drops in oil
(Journal article; Peer reviewed, 2017)In this paper we present experimental and numerical studies of the electrohydrodynamic stretching of a sub-millimetre-sized salt water drop, immersed in oil with added non-ionic surfactant, and subjected to a suddenly ... -
Influence of technical limitations and operation on sizing of an offshore energy storage connected to an offshore wind farm
(Journal article; Peer reviewed, 2015) -
Influence of Technological Parameters on the Isomerization of Geraniol Using Sepiolite
(Journal article; Peer reviewed, 2019-10-11)In the current study, the isomerization of geraniol over a natural sepiolite as a catalyst was investigated and optimized. Prior to application in the isomerization process, the physical and chemical properties of sepiolite ... -
Influence of temperature during pyrolysis of Fe-alginate: Unraveling the pathway towards highly active Fe/C catalysts
(Peer reviewed; Journal article, 2022)Transition metals supported on carbons play an important role in catalysis and energy storage. By pyrolysis of metal alginate, highly active catalysts for the Fischer-Tropsch synthesis (FTS) can be produced. However, the ... -
Influence of the low temperature drying process on optical alternations of organic apple slices
(Chapter, 2018)Drying conditions for convective driers are often based on empirical approaches in which the final product quality is evaluated post processing. Modern sensor technology and data processing enable second-by-second quality ... -
Influence of Tip Speed Ratio on Wake Flow Characteristics Utilizing Fully Resolved CFD Methodology
(Journal article; Peer reviewed, 2017)Dominant flow structures in the wake region behind the turbine employed in the Blind Test campaign [1], [2] is investigated numerically. The effect on the wake configuration at variable operating conditions are studied. ... -
Influence of Weight-on-Bit on Percussive Drilling Performance
(Peer reviewed; Journal article, 2020)A phenomenological model for percussive drilling systems is proposed in this paper to explain the experimentally demonstrated existence of an optimal weight-on-bit (WOB), for which the rate of penetration (ROP) is maximized. ... -
The Influences of Grain Refiner, Inclusion Level, and Filter Grade on the Filtration Performance of Aluminum Melt
(Peer reviewed; Journal article, 2021)The addition of grain refiner particles in the aluminum melt is known to reduce the filtration efficiency of ceramic foam filter (CFF). In the present work, a systematic study on the influence of the addition level of ... -
The influences of phytoplankton species, mineral particles and concentrations of dispersed oil on the formation and fate of marine oil-related aggregates
(Journal article; Peer reviewed, 2020-01-15)The formation and fallout of oil-related marine snow have been associated with interactions between dispersed oil and small marine particles, like phytoplankton and mineral particles. In these studies, the influences of ...