Now showing items 3351-3370 of 8753

    • Gaseous reduction of Mn ores in CO-CO2 atmosphere 

      Larssen, Trine Asklund; Tangstad, Merete; Kero, Ida (The Minerals, Metals & Materials Series;2367-1181, Chapter, 2018)
      The efficiency in production of manganese ferroalloys is dependent on the gaseous reduction of the higher manganese oxides in the ores used as raw materials. The materials, descending in the furnace, will meet the furnace ...
    • Gasification of wood powder in a small-scale entrained flow gasifier 

      Khalil, Roger Antoine; Seljeskog, Morten; Bakken, Jørn; Skreiberg, Øyvind (Peer reviewed; Journal article, 2023)
      Gasification of wood powder milled from commercially available wood pellets have been performed in a small-scale entrained flow gasifier. The main aim of this study is to investigate operational and feedstock requirements ...
    • Gassing During Tapping of Silicon 

      Vachaparambil, Kurian J.; Panjwani, Balram; Olsen, Jan Erik (Peer reviewed; Journal article, 2022)
      During tapping of metal from silicon furnaces, a significant amount of gas is often released through the tap-hole. The gas is combustible, and a flame jet is created which poses a safety threat to operators. Due to the ...
    • Gasskraftverk med CO2-håndtering - Studie av alternative teknologier 

      Bolland, Olav; Hagen, Roger; Maurstad, Ola; Tangen, Grethe; Juliussen, Olav; Svendsen, Hallvard Fjøsne (SINTEF Energi. Rapport;, Research report, 2002)
      Rapporten dokumenterer en studie som beskriver og sammenligner 12 ulike teknologier for gasskraftverk med CO2-håndtering. Merkostnaden for å fjerne CO2 i forbindelse med elektrisitetproduksjon er i studien beregnet til ...
    • GAWPS: A MRST-based module for wellbore profiling and graphical analysis of flow units 

      Oliveira, Gustavo P.; Rodrigues, Thiago N. E.; Lie, Knut-Andreas (Peer reviewed; Journal article, 2022)
      Several graphical methods have been developed to understand the stratigraphy observed in wells and assist experts in estimating rock quality, defining limits for barriers, baffles, and speed zones, and in particular, delineating ...
    • A general-purpose distributed pattern mining system 

      Belhadi, Asma; Djenouri, Youcef; Lin, Jerry Chun-Wei; Cano, Alberto (Peer reviewed; Journal article, 2020)
      This paper explores five pattern mining problems and proposes a new distributed framework called DT-DPM: Decomposition Transaction for Distributed Pattern Mining. DT-DPM addresses the limitations of the existing pattern ...
    • The generality of the standard 2D TFM approach in predicting bubbling fluidized bed hydrodynamics 

      Cloete, Schalk Willem Petrus; Zaabout, Abdelghafour; Johansen, Stein Tore; Annaland, MV; Gallucci, F; Amini, Shahriar (Peer reviewed; Journal article, 2013)
      Hydrodynamic simulations of a pseudo-2D bubbling fluidized bed were carried out and compared to experiments conducted over a wide range of flow conditions. The primary purpose of this study was to assess the generality of ...
    • Generalization and stabilization of exact scattering solutions for spherical symmetric scatterers 

      Venås, Jon Vegard; Jenserud, Trond (Peer reviewed; Journal article, 2022)
      In a previous work the authors described a fast high-fidelity computer model for acoustic scattering from multi-layered elastic spheres. This work is now extended with a scaling strategy significantly mitigating the problem ...
    • Generalized Chessboard Structures Whose Effective Conductivities Are Integer Valued 

      Lukkassen, Dag; Meidell, Annette (Journal article; Peer reviewed, 2012)
      We consider generalized chessboard structures where the local conductivity takes two values 𝑎� and 𝑏�. All integer combinations of 𝑎� and 𝑏� which make the components of effective conductivity matrix integer valued are ...
    • Generalized Voltage-based State-Space Modelling of Modular Multilevel Converters with Constant Equilibrium in Steady State 

      Bergna-Diaz, Gilbert; Freytes, Julian; Guillaud, Xavier; D'Arco, Salvatore; Suul, Jon Are Wold (Journal article; Peer reviewed, 2018)
      Abstract: This paper demonstrates that the sum and difference of the upper and lower arm voltages are suitable variables for deriving a generalized state-space model of an MMC which settles at a constant equilibrium in ...
    • Generating environmental sampling and testing data for micro- and nanoplastics for use in life cycle impact assessment 

      Askham, Cecilia; Pauna, Valentina H.; Boulay, Anne-Marie; Fantke, Peter; Jolliet, Olivier; Lavoie, Jerome; Booth, Andy; Coutris, Claire; Verones, Francesca; Weber, Miriam; Vijver, Martina G.; Lusher, Amy Lorraine; Hajjar, Carla (Peer reviewed; Journal article, 2022)
      Ongoing efforts focus on quantifying plastic pollution and describing and estimating the related magnitude of exposure and impacts on human and environmental health. Data gathered during such work usually follows a receptor ...
    • Generating hot water for food processing plant using waste heat, high temperature heat pump and storage 

      Kvalsvik, Karoline Husevåg; Bantle, Michael (Science et technique du froid;2018-3, Chapter; Peer reviewed, 2018)
    • Generating scenarios from probabilistic short-term load forecasts via non-linear Bayesian regression 

      Löschenbrand, Markus; Gros, Sebastien; Lakshmanan, Venkatachalam (Chapter; Peer reviewed, 2021)
      In this paper we present a simple and intuitive method for fitting a non-linear Bayesian regression model on short-term load forecasts. Such models have been implemented via Bayesian neural networks, which are known for ...
    • Generation of rule-adhering robot programs for aluminium welding automatically from CAD 

      Tran, Tuan Anh; Njaastad, Eirik B; Midling, Ole Terje; Bjelland, Morten; Lobov, Andrei (Peer reviewed; Journal article, 2023)
      This paper presents a method to automatically generate robot welding programs from CAD to address the ever-constant demand for product customisation. Furthermore, to ensure that proper welding operations and structural ...
    • Generic functionality in user interfaces for emergency response 

      Nilsson, Erik Gösta; Stølen, Ketil (Research report, 2011)
      In this report we use findings from a number of empirical studies involving different emergency response actors to identify shared or overlapping needs for user interfaces functionality.  By analyzing the findings ...
    • Generic functionality in user interfaces for emergency response 

      Nilsson, Erik Gøsta; Stølen, Ketil (Chapter, 2011)
      In this paper we use findings from a number of empirical studies involving different emergency response actors to identify shared or overlapping needs for user interfaces functionality. By analyzing the findings from these ...
    • Genesis of column sprites: Formation mechanisms and optical structures 

      Marskar, Robert (Peer reviewed; Journal article, 2024)
      Sprite discharges are electrical discharges that initiate from the lower ionosphere during intense lightning storms, manifesting themselves optically as flashes of light that last a few milliseconds. This study unravels ...
    • Geo-referenced building stock analysis as a basis for local-level energy and climate mitigation strategies 

      Lausselet, Carine; Rokseth, Lillian Sve; Lien, Synne Krekling; Bergsdal, Håvard; Tønnesen, J.; Brattebø, Helge; Sandberg, Nina Holck (Peer reviewed; Journal article, 2022)
      A geo-referenced building stock model was used to analyse the energy and climate performance of the Knowledge Axis in Trondheim, Norway, by 2050. Strategies for energy upgrades, construction of more energy-efficient new ...
    • Geofence for fartsreduksjon på buss 

      Hansen, Lillian; Foss, Trond (SINTEF;2024:00074, Research report, 2024)
      Geofencing er et verktøy som innebærer å sette opp et digitalt gjerde, som med posisjoneringsteknologi kan brukes til trafikkregulering innenfor en gitt sone avgrenset på et digitalt kart. Slik kan geofencing brukes til ...
    • Geofencing for smart urban mobility. Summarizing the main findings of Work Package 1 

      Foss, Trond; Seter, Hanne; Arnesen, Petter (SINTEF Rapport;2019:00123, Research report, 2019)