Blar i SINTEF Industri på emneord "mechanical properties"

Viser treff 1-7 av 7

    • Enhanced Mechanical Properties in 6082 Aluminum Alloy Processed by Cyclic Deformation 

      Chen, Xuanliang; Mørtsell, Eva Anne; Sunde, Jonas Kristoffer; O, Minho; Marioara, Calin Daniel; Holmestad, Randi; Kobayashi, Equo (Peer reviewed; Journal article, 2021)
      Aging heat treatment is the most commonly used strengthening method for Al–Mg–Si alloys since high-density precipitates will be formed to hinder the movement of dislocations. In the current work, room temperature cyclic ...

    • Interfacial microstructure and mechanical properties of Ti−6Al−4V/Al7050 joints fabricated using the insert molding method 

      Li, Hong-Xiang; Nie, Xin-Yu; He, Zan-bing; Zhao, Kang-Ning; Du, Qiang; Zhang, Ji-Shan; Zhuang, Lin-Zhong (Peer reviewed; Journal article, 2017)
      Ti−6Al−4V/Al7050 joints were fabricated by a method of insert molding and corresponding interfacial microstructure and mechanical properties were investigated. The interfacial thickness was sensitive to holding temperature ...

    • Laser Beam and Laser-Arc Hybrid Welding of Aluminium Alloys 

      Bunaziv, Ivan; Akselsen, Odd Magne; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik (Peer reviewed; Journal article, 2021)
      Aluminium alloys are widely used in many industries due to their high strength-to-weight ratios and resistance to corrosion. Due to their specific thermophysical properties and intricate physical metallurgy, these alloys ...

    • Micro- and macroscale consequences of interactions between CO2 and shale rocks 

      Bhuiyan, Mohammad Hossain; Agofack, Nicolaine; Gawel, Kamila; Cerasi, Pierre (Peer reviewed; Journal article, 2020)
      In carbon storage activities, and in shale oil and gas extraction (SOGE) with carbon dioxide (CO2) stimulation fluid, CO2 comes into contact with shale rock and its pore fluid. As a reactive fluid, the injected CO2 displays ...

    • Microstructure and Properties of Wire Arc Additive Manufacturing of Inconel 625 

      Akselsen, Odd Magne; Bjørge, Ruben; Ånes, Håkon Wiik; Ren, Xiaobo; Nyhus, Bård (Peer reviewed; Journal article, 2022)
      In the present investigation, wire arc additive manufacturing of Inconel 625 was carried out with the cold metal transfer variant of the metal inert gas process. The heat input varied between 0.46 and 0.63 kJ/mm, which is ...

    • Phase field simulation of microstructure evolution and process optimization during homogenization of additively manufactured Inconel 718 alloy 

      Chen, Miaomiao; Du, Qiang; Shi, Renhai; Fu, Huadong; Liu, Zhuangzhuang; Xie, Jianxin (Peer reviewed; Journal article, 2022)
      An in-depth and integral understanding of the microstructural evolution during thermomechanical process (TMP) is of great significance to optimize the manufactural process for high-quality components via additive manufacturing. ...

    • A Review on Laser-Assisted Joining of Aluminium Alloys to Other Metals 

      Bunaziv, Ivan; Akselsen, Odd Magne; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Gulbrandsen-Dahl, Sverre (Peer reviewed; Journal article, 2021)
      Modern industry requires different advanced metallic alloys with specific properties since conventional steels cannot cover all requirements. Aluminium alloys are becoming more popular, due to their low weight, high corrosion ...