• The effect of heavy deformation on the precipitation in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy 

      Thronsen, Elisabeth; Marioara, Calin Daniel; Sunde, Jonas Kristoffer; Minakuchi, Kazuhiro; Katsumi, Tetsuya; Erga, Iven; Andersen, Sigmund Jarle; Friis, Jesper; Marthinsen, Knut; Matsuda, Kenji; Holmestad, Randi (Peer reviewed; Journal article, 2020)
      This work has investigated the effect of the combination of natural ageing and 80% pre-deformation after solution heat treatment on precipitation during subsequent artificial ageing in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy. ...
    • Impurity removal from Si by Si-Ca-Mg ternary alloying-leaching system 

      Zhu, Mengyi; Wan, Di; Tang, Kai; Safarian, Jafar (Peer reviewed; Journal article, 2020)
      In this work, Si-Ca-Mg alloys were made with different compositions and solidification conditions to investigate the impurity segregation and separation performance from Si, especially for the crucial P impurity at several ...
    • Metallic foam supported electrodes for molten carbonate fuel cells 

      Wejrzanowski, Tomasz; Cwieka, K.; Skibinski, J.; Brynk, T.; Haj Ibrahim, S.; Milewski, J.; Xing, Wen (Peer reviewed; Journal article, 2020)
      This paper demonstrates the benefits of using a metallic foam support within molten carbonate fuel cell (MCFC) cathodes. A state-of-the-art fabrication process based on tape casting has been developed to produce microporous ...
    • Multi-purpose structured catalysts designed and manufactured by 3D printing 

      Lind, Anna; Vistad, Ørnulv Bjørnsson; Sunding, Martin Fleissner; Andreassen, Karin; Cavka, Jasmina Hafizovic; Grande, Carlos Adolfo (Peer reviewed; Journal article, 2020)
      This work presents an example of the design and manufacture capabilities that 3D printing can introduce in catalysis. A multi-purpose catalyst, with fast heat and mass transfer and low-pressure drop has been designed and ...
    • Nanoscale creep behavior and its size dependency of a Zr-based bulk metallic glass manufactured by selective laser melting 

      Liu, Siqi; Chang, Zexin; Fu, Yuequn; liu, yuyu; Lin, Meichao; Ren, Xiaobo; Wang, Wenxian; Zhang, Zhiliang; He, Jianying (Peer reviewed; Journal article, 2022)
      Nanoscale creep behaviors of metallic glasses (MGs) have gathered considerable interests in recent years, owing to their distinct atomistic mechanisms of plasticity. Additive manufacturing (AM) is a burgeoning technique ...
    • Precipitation in an extruded AA7003 aluminium alloy: Observations of 6xxx-type hardening phases 

      Lervik, Adrian; Marioara, Calin Daniel; Kadanik, Maria; Walmsley, John; Milkereit, Benjamin; Holmestad, Randi (Journal article; Peer reviewed, 2019)
      Precipitation behaviour in an industrially extruded AA7003 alloy has been studied using Transmission Electron Microscopy (TEM) together with Differential Scanning Calorimetry (DSC). Air Cooling (AC) after solution heat ...
    • Roadmap for additive manufacturing of HAYNES® 282® superalloy by laser beam powder bed fusion (PBF-LB) technology 

      Otto, Robert; Brøtan, Vegard; Carvalho, Patricia A.; Reiersen, Magnus; Graff, Joachim Seland; Sunding, Martin Fleissner; Åsebø Berg, Olav; Diplas, Spyridon; Azar, Amin Shahrestani (Peer reviewed; Journal article, 2021)
      Although various alloy systems have been explored for additive manufacturing (AM) during the past decade, introducing a new alloy remains a challenging task. Most of the materials require iterative builds, for investigating ...