Blar i SINTEF Industri på tidsskrift "MATEC Web of Conferences"
Viser treff 1-11 av 11
-
Additive manufacture of superduplex stainless steel using WAAM
(Peer reviewed; Journal article, 2018)Superduplex stainless steels have been used in the oil and gas industry for a couple of decades due to the combination of excellent mechanical properties and corrosion resistance. The present investigation addresses the ... -
Detailed investigation of the shearing mechanism of β" precipitates in Al-Mg-Si alloys
(Peer reviewed; Journal article, 2020)The mechanism behind shearing of β'' precipitates in Al-Mg-Si alloys during deformation is investigated by applying advanced transmission electron microscopy (TEM) techniques and frozen phonon multislice TEM image simulations ... -
Experimental and numerical investigation of strain distribution of notched lead fatigue test specimen
(Journal article; Peer reviewed, 2018) -
Fatigue investigation of complex weldments by the means of the local strain energy density approach
(Journal article; Peer reviewed, 2018) -
High cycle fatigue life estimation of AlSi10Mg processed by laser powder bed fusion
(Journal article, 2018)Fatigue life is known to be dependent on the surface properties of the material. Surface roughness provokes local stress concentration and cause crack initiation even at minute cyclic loads. In laser powder bed fusion, ... -
Hydrogen-assisted fatigue crack growth in ferritic steels – a fractographic study
(Journal article; Peer reviewed, 2018)Fatigue crack growth (FCG) behavior of a Fe-3wt.%Si ferritic alloy under different environmental conditions using in-situ electrochemical (cathodic) hydrogen (H) charging has been investigated. Three frequencies have been ... -
Hydrogen-assisted fatigue crack propagation in a pure BCC iron. Part I: Intergranular crack propagation at relatively low stress intensities
(Peer reviewed; Journal article, 2018) -
Hydrogen-assisted fatigue crack propagation in a pure BCC iron. Part II: Accelerated regime manifested by quasi-cleavage fracture at relatively high stress intensity range values
(Peer reviewed; Journal article, 2018)Hydrogen effect on fatigue performance at relatively high values of stress intensity factor range, ΔK, of pure BCC iron has been studied with a combination of various electron microscopy techniques. Hydrogen-assisted fatigue ... -
Interfacial microstructure formation in A356/steel compound castings using metal coating
(Peer reviewed; Journal article, 2020)Compound castings between aluminum and steel have great potential for applications in the automotive industry. However, due to large differences in thermal and mechanical properties between steel and aluminum, and the ... -
Self-protection concrete measures as prevention measure from chloride transport and corrosion of reinforcement
(Peer reviewed; Journal article, 2023)Incorporation of additives into a reinforced concrete matrix to delay or even completely avoid the initiation of corrosion during the service-life of the construction is a widely pursued topic. One of the new promising ... -
Wire and Arc Additive Manufacturing with TiC-Nanoparticle Reinforced AA5183 Alloy
(Peer reviewed; Journal article, 2020)Wire and arc additive manufacturing of aluminium-ceramic composites shows great potential to produce high strength materials. By incorporation of nanoparticles in the feedstock wire, fine-grained material with low ...