Blar i SINTEF på tittel
Viser treff 4187-4206 av 10236
-
High performance and toxicity assessment of Ta3N5 nanotubes for photoelectrochemical water splitting
(Peer reviewed; Journal article, 2020)In this work, Co-based cocatalysts are electrodeposited on mesoporous Ta3N5 nanotubes. The electrodeposition time is varied and the optimized photoelectrode reaches a photocurrent density of 6.3 mA/cm2 at 1.23 V vs. SHE, ... -
High performance and toxicity assessment of Ta3N5 nanotubes for photoelectrochemical water splitting
(Journal article; Peer reviewed, 2019)In this work, Co-based cocatalysts are electrodeposited on mesoporous Ta3N5 nanotubes. The electrodeposition time is varied and the optimized photoelectrode reaches a photocurrent density of 6.3 mA/cm2 at 1.23 V vs. SHE, ... -
High performance multicrystalline silicon: Grain structure and iron precipitation
(Peer reviewed; Journal article, 2017)A study of the spatial occurrence of iron precipitation in a high performance multicrystalline silicon (HPMC-Si) sample is presented. The separated effects of grain-boundaries, sparse intra-granular dislocations, and ... -
High Performance Predictable Quantum Efficient Detector Based on Induced-Junction Photodiodes Passivated with SiO2/SiNx
(Peer reviewed; Journal article, 2021)We performed a systematic study involving simulation and experimental techniques to develop induced-junction silicon photodetectors passivated with thermally grown SiO2 and plasma-enhanced chemical vapor deposited (PECVD) ... -
High rate filtration for local treatment of combined sewer overflow
(Journal article; Peer reviewed, 2019)Combined sewer overflows (CSOs) pollute receiving waters and have a negative impact on ecosystem services. In urban areas rehabilitation of the sewer system to avoid CSOs is associated with high investment costs. Furthermore, ... -
High temperature fluidization ‐ influence of inter‐particle forces on fluidization behavior
(SINTEF Proceedings;2, Chapter, 2017)Recent experiments have shown an influence of temperature on the minimum fluidization conditions in gas-solid fluidized beds, even when the gas phase density and viscosity were kept constant (Campos Velarde et al., 2016). ... -
High temperature gasification of high heating-rate chars using a flat-flame reactor
(Journal article; Peer reviewed, 2018)The increasing interest in gasification and oxy-fuel combustion of biomass has heightened the need for a detailed understanding of char gasification in industrially relevant environments (i.e., high temperature and ... -
High temperature industrial heat pumps utilising natural working fluids
(Actes du ... Congres international du froid;ICR2019, Chapter; Peer reviewed, 2019)There is a large demand for heat typically in the temperature range 100-200⁰C in different industries. This is today often covered by fossil fuel burning or direct use of electricity. Heat pumps has to a lesser extent been ... -
High temperature interaction between Si–B alloys and Si3N4
(Peer reviewed; Journal article, 2021)Si3N4 is a candidate crucible material for Si–B alloys in high temperature thermal energy storage system. In this regard, the phase formation in the Si–B alloys and the interaction between the alloys and Si3N4 were ... -
High Temperature Power Electronics Packaging
(SINTEF Rapport;, Research report, 2013)The lack of robust and reliable packaging methods are considered to be one of the main challenges for the next generation of high temperature electronics (>200 °C). Power electronics are especially difficult to operate in ... -
High volumes of recent surgical admissions, time to surgery, and 60-day mortality
(Peer reviewed; Journal article, 2021)Aims: Few studies have investigated potential consequences of strained surgical resources. The aim of this cohort study was to assess whether a high proportion of concurrent acute surgical admissions, tying up hospital ... -
High-Frequency Resonant Overvoltages in Transformer Regulating Winding Caused by Ground Fault Initiation on Feeding Cable
(Journal article; Peer reviewed, 2018)Transformer terminal equivalents obtained via admittance measurements are suitable for simulating high-frequency transient interaction between the transformer and the network. This paper augments the terminal equivalent ... -
High-Performance and Ultralow-Noise Two-Dimensional Heterostructure Field-Effect Transistors with One-Dimensional Electrical Contacts
(Peer reviewed; Journal article, 2021)Two-dimensional heterostructure field-effect transistors (2D-HFETs) with one-dimensional electrical contacts to atomically thin channels have recently shown great device performance, such as reduced contact resistance, ... -
High-Performance Asynchronous Byzantine Fault Tolerance Consensus Protocol
(Chapter, 2021)In response to new and innovating blockchain-based systems with Internet of Things (IoT), there is a need for consensus mechanisms that can provide high transaction throughput and security, despite varying network quality. ... -
High-performance fixed-bed in situ mass analyzer - ISMA
(Peer reviewed; Journal article, 2023)We demonstrate a newly developed high-performance fixed-bed reactor combined with an in situ mass analyzer (ISMA). The ISMA is particularly relevant to sub-second time-resolved studies where mass changes occur due to, e.g., ... -
High-Performance Nano Insulation Materials for Energy-Efficient Buildings
(Journal article, 2017)High-performance nano insulation materials (Hi-Per NIM) may be developed by exploiting the Knudsen effect for reduced thermal conductivity and thus make thermal insulation materials with a nanoporous air-filled structure. ... -
High-Power Machines and Starter-Generator Topologies for More Electric Aircraft: A Technology Outlook
(Peer reviewed; Journal article, 2020)More electric aircraft (MEA) architectures consist of several subsystems, which must all comply with the settled safety requirements of aerospace applications. Thus, achieving reliability and fault-tolerance represents the ... -
High-pressure CO2/CH4 separation of Zr-MOFs based mixed matrix membranes
(Peer reviewed; Journal article, 2020)The gas separation properties of 6FDA-DAM mixed matrix membranes (MMMs) with three types of zirconium-based metal organic framework nanoparticles (MOF NPs, ca. 40 nm) have been investigated up to 20 bar. Both NPs preparation ... -
High-pressure CO2/CH4 separation of Zr-MOFs based mixed matrix membranes
(Peer reviewed; Journal article, 2020)The gas separation properties of 6FDA-DAM mixed matrix membranes (MMMs) with three types of zirconium-based metal organic framework nanoparticles (MOF NPs, ca. 40 nm) have been investigated up to 20 bar. Both NPs preparation ...