Blar i Publikasjoner fra CRIStin på tittel

Viser treff 6626-6645 av 8661

    • The role of simulators in interdisciplinary medical work 

      Haavik, Torgeir Kolstø; Våpenstad, Cecilie (Peer reviewed; Journal article, 2020)
      This article reports from a project introducing a virtual reality simulator with patient-specific input for endovascular aneurysm repair (EVAR) into a surgical environment at a university hospital in Norway during 2016–2019. ...

    • The role of state agency in path development: a longitudinal study of two Norwegian manufacturing regions 

      Steen, Markus; Lund, Henrik Brynthe; Karlsen, Asbjørn (Peer reviewed; Journal article, 2023)
      The role of the state remains underdeveloped in the regional path development literature. This paper analyses how the Norwegian state via different roles (regulator, purchaser, owner, facilitator) directly and indirectly ...

    • The role of stigma in accessing education for people with disabilities in low and middle-income countries: a review of the evidence 

      Azalde, Gloria; Braathen, Stine Hellum (SINTEF AS (ISBN starter med 978-82-14-);, Research report, 2018)
      People with disabilities are often subjected to stigma, which can keep them from realising their full potential and their human rights, including the right to education. The UN agenda for Sustainable Development Goals, ...

    • The role of sustainability characteristics in the diffusion of renewable energy technologies 

      Rocha Aponte, Fabian; Wiebe, Kirsten Svenja; Luttikhuis, Danique Anne Cecile (Peer reviewed; Journal article, 2023)
      This paper aims to investigate the role of sustainability factors in the diffusion of solar photovoltaic (PV) technologies. A combined economic innovation-diffusion model that accounts for additional sustainability aspects ...

    • The roles of intermediaries in upgrading of manufacturing clusters: enhancing cluster absorptive capacity 

      Karlsen, Asbjørn; Lund, Henrik Brynthe; Steen, Markus (Peer reviewed; Journal article, 2022)
      Specialized clusters rely on common knowledge resources and extra-cluster linkages, but how such resources develop over time is unclear. A case in point is how extra-cluster linkages are integrated into intra-cluster ...

    • Romanian Standardized Noise Reaction Questions for Community Noise Surveys 

      Gjestland, Truls; Toma, Adina; Dragasanu, Luminita; Deaconu, Marius; Oprea, Bogdan (Journal article; Peer reviewed, 2017)
      The International Commission on Biological Effects of Noise, ICBEN, has recommended the use of two standardized annoyance reaction questions for community noise surveys. ICBEN has also published a detailed protocol for ...

    • Roof-integrated PV in Nordic climate - Building physical challenges 

      Gullbrekken, Lars; Kvande, Tore; Time, Berit (Journal article; Peer reviewed, 2015)
      Use of photovoltaics (PV) is key remedies in buildings where a large part of the energy supply should be based on renewable energy. PV in Nordic climate can be challenging because of and temperatures below zero. The aim ...

    • Room Temperature Characteristics of Polymer-Based Low Ice Adhesion Surfaces 

      He, Zhiwei; Vågenes, Elisabeth Tanami; Delabahan, Chrisrosemarie; He, Jianying; Zhang, Zhiliang (Journal article; Peer reviewed, 2017)

    • Room temperature creep mechanism of a Pb-Sn-Sb lead alloy 

      Viespoli, Luigi Mario; Johanson, Audun; Alvaro, Antonio; Nyhus, Bård; Berto, Filippo (Peer reviewed; Journal article, 2019)
      Lead alloys are the most common materials adopted for the production of subsea power cable sheathing. The sheathing is a layer of stable and watertight metal, which serves to prevent the electrical failure of the cable. ...

    • Root causes for corrosion on painted steel structures in marine environments 

      Knudsen, Ole Øystein; Hagen, Catalina Hoem Musinoi; Skilbred, Anders Werner Bredvei; Bruaas, Tarjei K.; Nærland, Jarand (Peer reviewed; Journal article, 2023)
      Our understanding of the failure mechanisms of coatings, for example, cathodic disbonding, corrosion creep, blistering, and cracking, have been developed to a high level over the past decades. However, knowing what actually ...

    • Root formation and mechanical properties in laser keyhole welding of 15 mm thick HSLA steel 

      Bunaziv, Ivan; Dørum, Cato; Nielsen, Steen Erik; Suikkanen, Pasi; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Akselsen, Odd Magne (Peer reviewed; Journal article, 2021)
      Deep penetration laser welding is promising in joining thick (> 10 mm) steel sections. Focused laser beam by drilling vapour cavity, the keyhole, generates deep and narrow welds. Full penetration single-pass joining has a ...

    • Root formation and metallurgical challenges in laser beam and laser-arc hybrid welding of thick structural steel 

      Bunaziv, Ivan; Dørum, Cato; Nielsen, Steen Erik; Suikkanen, Pasi; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Akselsen, Odd Magne (Peer reviewed; Journal article, 2021)
      Single-pass laser beam welding (LBW) of steel components with wall thickness of > 10 mm is of high interest due to enhanced productivity. Deep penetration LBW provides excessive hardness and certain quality issues such as ...

    • Rotating bed reactor for CLC: Bed characteristics dependencies on internal gas mixing 

      Blom, Richard; Håkonsen, Silje Fosse; Grande, Carlos Adolfo (Peer reviewed; Journal article, 2014)
      A newly designed continuous lab-scale rotating bed reactor for chemical looping combustion using CuO/Al2O3 oxygen carrier spheres and methane as fuel gives around 90% CH4 conversion and >90% CO2 capture efficiency based ...

    • Rotatorier som levendefor til torskeyngel 

      Øie, Gunvor; Overrein, Ingrid; Storøy, Werner; Skjermo, Jorunn; Lee, Keshuai; Monsen, Marius; Størseth, Trond Røvik (SINTEF Fiskeri og havbruk rapporter;A112023, Research report, 2011-04-05)
      Stabil og forutsigbar produksjon av rotatorier er avgjørende for å lykkes med marin yngelproduksjon. I denne rapporten gis det en innføring i dagens kunnskap knyttet til rotatorier (DPI). Dette omfatter tema som generell ...

    • Rotor‐integrated modeling of wind turbine aerodynamics 

      Chabaud, Valentin Bruno (Peer reviewed; Journal article, 2021)
      A novel approach for the modeling of rotor-integrated aerodynamic loads is suggested to answer the need for a comprehensive, insightful, and analytical actuator disc model. All the six degrees of freedom (including tangential ...

    • Round Robin Test program on Energy Absorption Capacity of Round Panels according to Norwegian Concrete Associations Publication no 7:2011 

      Bjøntegaard, Øyvind; Myren, Synnøve Adelheid; Skjølsvold, Ola (COIN Project report;48, Research report, 2013)
      A Round-Robin test program (inter-laboratory study) on energy absorption capacity of round panels is presented. The panels were tested according to the procedure described in Norwegian Concrete Associations Publication no. ...

    • Routing Applications in Newspaper Delivery 

      Hasle, Geir (Research report, 2012)
      The goal of this report is to give an up-to-date account of routing applications in the newspaper business. We describe the newspaper supply chain, and focus on the “last mile” distribution that has been advocated as an ...

    • ROV Navigation in a Fish Cage with Laser-Camera Triangulation 

      Bjerkeng, Magnus Christian; Kirkhus, Trine; Caharija, Walter; Thielemann, Jens T; Amundsen, Herman Biørn; Ohrem, Sveinung Johan; Grøtli, Esten Ingar (Peer reviewed; Journal article, 2021)
      Aquaculture net cage inspection and maintenance is a central issue in fish farming. Inspection using autonomous underwater vehicles is a promising solution. This paper proposes laser-camera triangulation for pose estimation ...

    • RTO Participation in the 6th Framework Programme 

      Kristiansen, Ernst Herlof (Lecture, 2007)
      Forskningsinstitutters innsats i EUs 6 rammeprogram

    • Rus og psykiske lidelser i psykisk helsevern for voksne 

      Gråwe, Rolf Wilhelm; Ruud, Torleif (SINTEF rapport;A59, Research report, 2006)
      Hensikten med denne studien var å beskrive forekomsten av pasienter med både rus og psykiske lidelser (ROP-pasienter) i ulike deler av spesialisthelsetjenesten og finne ut om de skiller seg fra andre pasienter med hensyn ...