Blar i Publikasjoner fra CRIStin på tittel
Viser treff 4216-4235 av 8725
-
Investigation of the properties and reactivity of biocarbons at high temperature in mixture of CO/CO2
(Peer reviewed; Journal article, 2022)The CO2 gasification reactivity of biocarbons produced from birch wood chips under different atmospheric and pressurised conditions was investigated in this work. The reactivity tests were conducted by using a Macro-TGA ... -
Investigation of Two Immiscible Liquids Wetting at Elevated Temperature: Interaction Between Liquid FeMn Alloy and Liquid Slag
(Peer reviewed; Journal article, 2021)The goal of the current work is to develop a methodology to study the wetting behaviour of two immiscible liquids at high temperatures, and to investigate the parameters which influence the wetting properties. The wetting ... -
Investigation of veryintenseD3-band emission in multi-crystalline silicon wafers using electron microscopy and hyperspectral photoluminescence imaging
(Peer reviewed; Journal article, 2022)Defects in high performance multi-crystalline silicon wafers can be detrimental to the lifetime of the solar cell. It is, therefore, important to study and understand the underlying structure and chemical elements present ... -
Investigation on ash slag from combustion of medium-density fiberboard production residues
(Journal article, 2019)Medium-Density Fiberboard (MDF) is made by breaking down of wood as conifer wood thinnings and wood processing industry residues including sawdust, which is glued and pressed together, and is widely used as a building ... -
Investigation on Ash Slagging Characteristics during Combustion of Biomass Pellets and Effect of Additives
(Journal article; Peer reviewed, 2017) -
Investigation on Fault-ride through Methods for VSC-HVDC Connected Offshore Wind Farms
(Journal article; Peer reviewed, 2016)This paper proposes a novel fault-ride through method for offshore wind farms connected to grid through a voltage source converter (VSC)-based high voltage direct current (HVDC) transmission. The proposed method introduces ... -
Investigation on heat recovery strategies from low temperature food processing plants: Energy analysis and system comparison
(Chapter; Peer reviewed, 2021)Industrial food processing plants often have significant thermal requirements at both low and high temperatures. These plants can produce a variety of products including frozen, chilled and grilled/steamed foodstuff, ... -
Investigation on scale formation in aluminium industry by means of a cold-finger
(Journal article; Peer reviewed, 2019)A cylindrical fouling probe or “cold-finger” has been used to investigate fouling from aluminium production off-gas. The probe was located upstream from the off-gas cleaning system. Surface deposits have been collected for ... -
Investigation, numerical model, and monitoring for Follo line - a metro project in Oslo
(Peer reviewed; Journal article, 2023)Just south of Oslo Central Station the new high-speed Follo Line railway tunnels pass beneath the existing Ekeberg road tunnels. This paper presents the construction methods, numerical model, and monitoring program used ... -
Investigations of 6-pane Glazing: Properties and Possibilities
(Journal article; Peer reviewed, 2019)Today there is increasing interest and demand for energy savings in the building sector. Windows still represent a weak point in the building envelope with respect to thermal performance due to thermal losses from the ... -
Investigations of Accelerated Climate Aged Wood Substrates by Fourier Transform Infrared Radiation Material Characterization
(Journal article; Peer reviewed, 2012)Fourier transform infrared (FTIR) material characterization by applying the attenuated total reflectance (ATR) experimental technique represents a powerful measurement tool. The ATR technique may be applied on both solid ... -
Investigations of molybdenum-promoted manganese-based solid sorbents for H2S capture
(Peer reviewed; Journal article, 2020)The promotion effect of Mo-addition to alumina-supported Mn-based sorbents for high-temperature desulphurization was explored. A series of Mn-based sorbents with fixed Mn-loading and different Mo-loadings were prepared by ... -
Investigations of TiO2 as a protective coating on diaphragm-based in vivo sensors
(Chapter, 2009)The motivation for these experiments has been to investigate the influence of a biocompatible protective coating on diaphragm-based in vivo sensors. The investigated device is a resonator for fish identification. Such a ... -
Investing for Impact. Lessons with the Norwegian State Project Model and the first ivvestment projects that have been subjected to external quality assurance
(Concept rapport;, Book, 2013)The report provides a description of the Norwegian State Project Model, also referred to as the government’s scheme for external quality assurance of major public investment projects (the QA scheme). The scheme was introduced ... -
Invisible Data Curation Practices: A Case Study from Facility Management
(Peer reviewed; Journal article, 2021)Facility management, which concerns the administration, operations, and maintenance of buildings, is a sector undergoing significant changes while becoming digitalized and data driven. In facility management sector, companies ... -
(Invited) 3D Interconnect Technologies for Advanced MEMS/NEMS Applications
(Journal article; Peer reviewed, 2010)3D integration and wafer level packaging (WLP) with through-silicon vias offer benefits like reduced footprint and improved performance. CMOS imaging sensors is one of the first successful introductions of a product with ... -
The InVizAR Project: Augmented Reality Visualization for Non-Destructive Testing Data from Jacket Platforms
(Journal article, 2023)There is an increasing need for underwater condition control for offshore steel platforms and wind and fish farming facilities. Localized diagnostic techniques, such as magnetic field non-destructive testing (NDT) methodologies ... -
InVizAR project: Augmented Reality visualization of invisible fields utilizing sensor data
(Research report, 2023) -
Involving Users in the Design of Sharing Economy Services
(Chapter, 2017)Involving users in the design of sharing economy services is important to re-alize the expected growth in this market. However, such involvement may be challenging due to the complexity and networked character of the service ... -
Involving users in the development of a modeling language for customer journeys
(Peer reviewed; Journal article, 2023)Although numerous methods for handling the technical aspects of developing domain-specific modeling languages (DSMLs) have been formalized, user needs and usability aspects are often addressed late in the development process ...