Blar i SINTEF Open på emneord "Fatigue"
Viser treff 1-9 av 9
-
Committee I.2: Loads
(Chapter, 2018-09)Concern for the environmental and operational loads from waves, wind, current, ice, slamming, sloshing, green water, weight distribution and any other operational factors. Consideration shall be given to deterministic and ... -
Fatigue Analysis of Inter-Array Power Cables between Two Floating Offshore Wind Turbines Including a Simplified Method to Estimate Stress Factors
(Journal article; Peer reviewed, 2023)The use of floating offshore wind farms for electrical energy supply is expected to rise significantly over the coming years. Suspended inter-array power cables are a new design to connect floating offshore wind turbines ... -
High cycle fatigue life estimation of AlSi10Mg processed by laser powder bed fusion
(Journal article, 2018)Fatigue life is known to be dependent on the surface properties of the material. Surface roughness provokes local stress concentration and cause crack initiation even at minute cyclic loads. In laser powder bed fusion, ... -
Interpretation of hydrogen-assisted fatigue crack propagation in BCC iron based on dislocation structure evolution around the crack wake
(Peer reviewed; Journal article, 2018)A new model for hydrogen-assisted fatigue crack growth (HAFCG) in BCC iron under a gaseous hydrogen environment has been established based on various methods of observation, i.e., electron backscatter diffraction (EBSD), ... -
Multi-scale observation of hydrogen-induced, localized plastic deformation in fatigue-crack propagation in a pure iron
(Peer reviewed; Journal article, 2017)In order to study the influence of hydrogen on plastic deformation behavior in the vicinity of the fatigue crack-tip in a pure iron, a multi-scale observation technique was employed, comprising electron channeling contrast ... -
Multi-scale observation of hydrogen-induced, localized plastic deformation in fatigue-crack propagation in a pure iron
(Peer reviewed; Journal article, 2017)In order to study the influence of hydrogen on plastic deformation behavior in the vicinity of the fatigue crack-tip in a pure iron, a multi-scale observation technique was employed, comprising electron channeling contrast ... -
Safety climate and health complaints in the Norwegian aquaculture industry
(Journal article; Peer reviewed, 2019-11)Few studies have explored the potential connection between safety climate and health issues. However, some recent research findings indicate that a poor safety climate can be considered a stressor that may be associated ... -
Subsea power cable sheathing: an investigation of lead fatigue performance
(Peer reviewed; Journal article, 2020)The protection of subsea power cables against electrical failure is achieved by the use of a watertight layer. Due to its properties of chemical stability and ductility, lead has been the material of choice for this purpose ... -
Tensile and fatigue behavior of a Pb-Sn-Sb alloy investigated via small-scale in-situ mechanical testing in SEM
(Journal article; Peer reviewed, 2020)Pb-Sn-Sb alloys (E-alloy) are commonly used in subsea power cable sheathing. Due to the relatively low melting temperature, i.e. around 600 K, this type of alloy is prone to experience microstructural time-dependent evolution ...