Now showing items 6-25 of 4986

    • 1st RE-food Symposium - Goa, India, Feb. 2018 - Sustainable technologies for Food processing and preservation 

      Eilertsen, Aleksander Børresen; Thakur, Maitri; Widell, Kristina Norne; Tveit, Guro Møen (SINTEF Ocean rapporter;OC2018:00680, Research report, 2018-06-20)
      There is an urgent need to provide food and feed ingredients for the growing world population while tackling the problem of food loss at a global scale at the same time. Solutions for reducing food loss and strengthening ...
    • 2019:00075 A - D5.1 Industrial production line for seedlings - MACROSEA WP5 

      Alver, Morten (SINTEF Ocean rapporter;2019:00075 A, Research report, 2019-01-17)
      The production process for seedlings of macroalgae is analysed with regard to challenges and bottlenecks associated with industrial scale production. Based on issues identified for each sub-process, an action plan with ...
    • 25 år med selvbestemt abort 

      Bakken, Inger Johanne; Skjeldestad, Finn Egil (SINTEF rapport;A2413, Research report, 2005)
      STF78 A052501 Rapporten bygger på en analyse av alle utførte svangerskapsavbrudd registrert i Statistisk sentralbyrå fra 1. januar 1979 til og med 31. desember 2003. I løpet av de 25 første årene med lov om selvbestemt ...
    • 2D-packing with an application to stowage in Roll-on Roll-off liner shipping 

      Hansen, Jone; Hukkelberg, Ivar; Fagerholt, Kjetil; Stålhane, Magnus; Rakke, Jørgen Glomvik (Journal article; Peer reviewed, 2016-08-14)
      Roll-on/Roll-off (RoRo) ships represent the primary source for transporting vehicles and other types of rolling material over long distances. In this paper we focus on operational decisions related to stowage of cargoes ...
    • 2nd run of full 3-D detectors 

      Hansen, Thor-Erik; Kok, Angela; Hansen, Trond Andreas; Lietaer, Nicolas; Jensen, Geir Uri; Summanwar, Anand (Lecture, 2009)
    • 30 tonns utslippsfri gravemaskin. Teknologistatus, kartlegging og erfaringer 

      Wiik, Marianne Rose Kjendseth; Suul, Jon Are Wold; Sundseth, Kyrre; Ødegård, Anders; Mellegård, Sofie Elisabet; Azrague, Kamal; Haukaas, Nils-Olav; Ibsen, Jan Ivar; Lekanger, Randi; Ianssen, Christina (SINTEF Fag;52, Research report, 2018)
      Prosjektet "Zero Emission Digger" (ZED) har som hovedmål å realisere en prototyp for en utslippsfri 30 tonns beltegravemaskin. Hensikten med prosjektet er å utvikle en slik maskin fra et konseptdesign til et kommersielt ...
    • 3D Integration of MEMS and IC: Design, technology and simulations 

      Schjølberg-Henriksen, Kari (Lecture, 2009)
      * 3D integration: Opportunities and trends* e-CUBES: Tire pressure monitoring system (TPMS)* Package design including thermo-mechanical modeling* Technology development* Sensor packaging concept* Gold stud bump bonding* ...
    • 3D Integration Technologies for Wireless Sensor Systems (e-CUBES) 

      Taklo, Maaike Margrete Visser (Lecture, 2008)
      The innovative approach presented here will realize so-called e-CUBES® (electronic cubes) [1], i.e. investigate and develop ultra small sensor cubes with dimensions of a few mm3 which are wirelessly communicating among ...
    • 3D Integration Technologies for Wireless Sensor Systems (e-CUBES) 

      Taklo, Maaike Margrete Visser (Lecture, 2008)
      The innovative approach presented here will realize so-called e-CUBES® (electronic cubes) [1], i.e. investigate and develop ultra small sensor cubes with dimensions of a few mm3 which are wirelessly communicating among ...
    • 3D Integration technology: Status and application development 

      Ramm, Peter; Klumpp, Armin; Weber, Josef; Lietaer, Nicolas; Taklo, Maaike M. Visser; de Raedt, W.; Fritzsch, Thomas; Couderc, Pascal (Journal article; Peer reviewed, 2010)
      As predicted by the ITRS roadmap, semiconductor industry development dominated by shrinking transistor gate dimensions alone will not be able to overcome the performance and cost problems of future IC fabrication. Today ...
    • 3D interconnect technologies for advanced MEMS/NEMS applications 

      Lietaer, Nicolas; Taklo, Maaike Margrete Visser; Schjølberg-Henriksen, Kari; Ramm, Peter (Lecture, 2009)
    • 3D motion dynamics of axisymmetric bodies falling through water 

      Alsos, Hagbart Skage; Faltinsen, Odd Magnus (Journal article; Peer reviewed, 2018-12-01)
      A new simplified method for analysis of 3D motion dynamics of axisymmetric slender bodies falling from air through water is presented. Slender-body theory for potential flow of incompressible water is combined with 2D + t ...
    • 3D-Printing Technology in Construction: Results from a Survey 

      Olsson, Nils; Shafqat, Ali; Arica, Emrah; Økland, Andreas (Emerald Reach Proceedings Series, Chapter; Conference object; Peer reviewed, 2019)
      Purpose – The purpose of this paper is to study the introduction of 3D-printing of concrete in the construction sector. Design/Methodology/Approach – A survey was conducted to collect professional view on ongoing innovations ...
    • 3D Radiation Detectors: Charge Collection Characterisation and Applicability of Technology for Microdosimetry 

      Tran, Linh T.; Prokopovich, Dale A.; Petasecca, Marco; Lerch, Michael L.F.; Kok, Angela; Summanwar, Anand; Hansen, Thor-Erik; Da Via, Cinzia; Reinhard, Mark I.; Rosenfeld, Anatoly B. (Journal article; Peer reviewed, 2014)
      A study of charge collection in SINTEF 3D active edge silicon detectors was carried out at ANSTO using Ion Beam InducedCharge (IBIC) technique.An IBIC study has shown that several different geometries of 3D detectors have ...
    • 3-D Snake Robot Motion: Nonsmooth Modeling, Simulations, and Experiements 

      Transeth, Aksel Andreas (Journal article; Peer reviewed, 2008)
      A nonsmooth (hybrid) 3-D mathematical model of a snake robot (without wheels) is developed and experimentally validated in this paper. The model is based on the framework of nonsmooth dynamics and convex analysis that ...
    • 3D stacked MEMS and ICs in a miniaturized sensor node 

      Lietaer, Nicolas (Lecture, 2009)
      Solutions for through silicon viasSolutions for interconnectsDemonstrator for e-CUBES
    • 3D stacked MEMS and ICs in a miniaturized sensor node 

      Lietaer, Nicolas (Chapter, 2009)
      3D integration of micro electromechanical systems (MEMS) is expected to reduce the foot print of existing MEMS products and enable production of miniaturized sensor nodes on a large scale. However, 3D integration of MEMS ...
    • 3D ultrasound reconstruction algorithms from analog and digital data 

      Solberg, Ole Vegard; Lindseth, Frank; Bø, Lars Eirik; Muller, Sebastien; Meland, Janne Beate Lervik; Tangen, Geir Arne; Hernes, Toril A. Nagelhus (Journal article; Peer reviewed, 2011)
    • 4D Seismic Monitoring of CO2 Storage During Injection and Post-closure at the Ketzin Pilot Site 

      Lüth, Stefan; Bergmann, Peter; Huang, Fei; Ivandic, Monika; Ivanova, Alexandra; Juhlin, Christopher; Kempka, Thomas (Journal article; Peer reviewed, 2017)
      At the Ketzin pilot site for geological CO2 storage, about 67,000 tons of CO2 were injected during the period June 2008 – August 2013. Since August 2013, the site is in its post-closure phase. Before and during the injection ...