Blar i SINTEF på tittel

Viser treff 26-45 av 10053

    • 3D Integration of MEMS and IC: Design, technology and simulations 

      Schjølberg-Henriksen, Kari (Lecture, 2009)
      * 3D integration: Opportunities and trends* e-CUBES: Tire pressure monitoring system (TPMS)* Package design including thermo-mechanical modeling* Technology development* Sensor packaging concept* Gold stud bump bonding* ...

    • 3D Integration Technologies for Wireless Sensor Systems (e-CUBES) 

      Taklo, Maaike Margrete Visser (Lecture, 2008)
      The innovative approach presented here will realize so-called e-CUBES® (electronic cubes) [1], i.e. investigate and develop ultra small sensor cubes with dimensions of a few mm3 which are wirelessly communicating among ...

    • 3D Integration Technologies for Wireless Sensor Systems (e-CUBES) 

      Taklo, Maaike Margrete Visser (Lecture, 2008)
      The innovative approach presented here will realize so-called e-CUBES® (electronic cubes) [1], i.e. investigate and develop ultra small sensor cubes with dimensions of a few mm3 which are wirelessly communicating among ...

    • 3D Integration technology: Status and application development 

      Ramm, Peter; Klumpp, Armin; Weber, Josef; Lietaer, Nicolas; Taklo, Maaike M. Visser; de Raedt, W.; Fritzsch, Thomas; Couderc, Pascal (Journal article; Peer reviewed, 2010)
      As predicted by the ITRS roadmap, semiconductor industry development dominated by shrinking transistor gate dimensions alone will not be able to overcome the performance and cost problems of future IC fabrication. Today ...

    • 3D interconnect technologies for advanced MEMS/NEMS applications 

      Lietaer, Nicolas; Taklo, Maaike Margrete Visser; Schjølberg-Henriksen, Kari; Ramm, Peter (Lecture, 2009)

    • A 3D kinetic Monte Carlo study of streamer discharges in CO2 

      Marskar, Robert (Peer reviewed; Journal article, 2024)
      We theoretically study the inception and propagation of positive and negative streamers in CO2. Our study is done in 3D, using a newly formulated kinetic Monte Carlo discharge model where the electrons are described as ...

    • 3D modelling of β'' in Al-Mg-Si: towards an atomistic level ab initio based examination of a full precipitate enclosed in a host lattice 

      Ehlers, Flemming J H; Dumoulin, Stephane; Holmestad, Randi (Peer reviewed; Journal article, 2014)
      We extend a first principles based hierarchical multi-scale model scheme for describing a fully coherent precipitate in a host lattice to 3D simulations. As our test system, the needle-shaped main hardening Al–Mg–Si alloy ...

    • 3D motion dynamics of axisymmetric bodies falling through water 

      Alsos, Hagbart Skage; Faltinsen, Odd Magnus (Journal article; Peer reviewed, 2018-12-01)
      A new simplified method for analysis of 3D motion dynamics of axisymmetric slender bodies falling from air through water is presented. Slender-body theory for potential flow of incompressible water is combined with 2D + t ...

    • 3D Printed PEI Containing Adsorbents Supported by Carbon Nanostructures for Post-combustion Carbon Capture From Biomass Fired Power Plants 

      Krishnamurthy, Shreenath; Blom, Richard; Andreassen, Kari Anne; Middelkoop, Vesna; Rombouts, Marleen; Borras, Adolfo Benedito (Peer reviewed; Journal article, 2021)
      Processes that utilize solid adsorbents to capture CO2 are promising alternatives to state-of-art Amine based technologies for capturing CO2 from large point sources. Although the energy needs of solid sorbent-based processes ...

    • 3D Radiation Detectors: Charge Collection Characterisation and Applicability of Technology for Microdosimetry 

      Tran, Linh T.; Prokopovich, Dale A.; Petasecca, Marco; Lerch, Michael L.F.; Kok, Angela; Summanwar, Anand; Hansen, Thor-Erik; Da Via, Cinzia; Reinhard, Mark I.; Rosenfeld, Anatoly B. (Journal article; Peer reviewed, 2014)
      A study of charge collection in SINTEF 3D active edge silicon detectors was carried out at ANSTO using Ion Beam InducedCharge (IBIC) technique.An IBIC study has shown that several different geometries of 3D detectors have ...

    • 3D reconstruction of existing concrete bridges using optical methods 

      Popescu, Cosmin; Täljsten, Björn; Blanksvärd, Thomas; Elfgren, Lennart (Peer reviewed; Journal article, 2019)
      Routine bridge inspections usually consist of visual observations. These inspections are time-consuming and subjective. There is a need to identify new inspection techniques for infrastructure that reduce traffic disturbance, ...

    • 3D silicon detectors for neutron imaging applications 

      Povoli, Marco; Kok, Angela Chun Ying; Koybasi, Ozhan; Getz, Michael Norderhaug; O'Neill, George; Roehrich, Dieter; Pedersen, Henrik; Monakhov, Eduard; Birch, Jens; Choolakkal, Arun Haridas; Kanaki, Kalliopi; Lai, Chung-Chuan; Hall-Wilton, Richard; Slavicek, Tomas; Llamas-Jansa, Isabel (Peer reviewed; Journal article, 2023)
      Neutron detection is of great importance in many fields spanning from scientific research, to nuclear science, and to medical application. The development of silicon-based neutron detectors with enhanced neutron detection ...

    • 3D stacked MEMS and ICs in a miniaturized sensor node 

      Lietaer, Nicolas (Chapter, 2009)
      3D integration of micro electromechanical systems (MEMS) is expected to reduce the foot print of existing MEMS products and enable production of miniaturized sensor nodes on a large scale. However, 3D integration of MEMS ...

    • 3D stacked MEMS and ICs in a miniaturized sensor node 

      Lietaer, Nicolas (Lecture, 2009)
      Solutions for through silicon viasSolutions for interconnectsDemonstrator for e-CUBES

    • 3D ultrasound reconstruction algorithms from analog and digital data 

      Solberg, Ole Vegard; Lindseth, Frank; Bø, Lars Eirik; Muller, Sebastien; Meland, Janne Beate Lervik; Tangen, Geir Arne; Hernes, Toril A. Nagelhus (Journal article; Peer reviewed, 2011)

    • 3D ultrasound-guided resection of low-grade gliomas: principles and clinical examples 

      Unsgård, Geirmund; Lindseth, Frank (Journal article, 2019)
      3D ultrasound (US) is a convenient tool for guiding the resection of low-grade gliomas, seemingly without deterioration in patients’ quality of life. This article offers an update of the intraoperative workflow and the ...

    • 3D-printed polyamide structures coated with TiO2 nanoparticles, towards a 360-degree rotating photocatalytic reactor 

      Grandcolas, Mathieu; Lind, Anna Maria (Peer reviewed; Journal article, 2022)
      3D-printed polyamide structures coated with TiO2 nanoparticles were obtained by a simple impregnation method. This novel type of 3D reactor was evaluated for its photocatalytic activity towards the degradation of methylene ...

    • 3D-Printing Technology in Construction: Results from a Survey 

      Olsson, Nils; Shafqat, Ali; Arica, Emrah; Økland, Andreas (Emerald Reach Proceedings Series, Chapter; Conference object; Peer reviewed, 2019)
      Purpose – The purpose of this paper is to study the introduction of 3D-printing of concrete in the construction sector. Design/Methodology/Approach – A survey was conducted to collect professional view on ongoing innovations ...

    • 4D Seismic Monitoring of CO2 Storage During Injection and Post-closure at the Ketzin Pilot Site 

      Lüth, Stefan; Bergmann, Peter; Huang, Fei; Ivandic, Monika; Ivanova, Alexandra; Juhlin, Christopher; Kempka, Thomas (Journal article; Peer reviewed, 2017)
      At the Ketzin pilot site for geological CO2 storage, about 67,000 tons of CO2 were injected during the period June 2008 – August 2013. Since August 2013, the site is in its post-closure phase. Before and during the injection ...

    • 6D pose estimation for subsea intervention in turbid waters 

      Mohammed, Ahmed; Kvam, Johannes; Thielemann, Jens T; Haugholt, Karl H.; Risholm, Petter (Peer reviewed; Journal article, 2021)
      Manipulation tasks on subsea instalments require extremely precise detection and localization of objects of interest. This problem is referred to as “pose estimation”. In this work, we present a framework for detecting and ...