Vis enkel innførsel

dc.contributor.authorKhadyko, Mikhail
dc.contributor.authorDumoulin, Stephane
dc.contributor.authorHopperstad, Odd Sture
dc.date.accessioned2020-10-09T11:33:29Z
dc.date.available2020-10-09T11:33:29Z
dc.date.created2016-11-15T10:01:10Z
dc.date.issued2016
dc.identifier.citationInternational Journal of Solids and Structures. 2016, 97_98 239-255.en_US
dc.identifier.issn0020-7683
dc.identifier.urihttps://hdl.handle.net/11250/2682001
dc.description.abstractThrough-thickness crystallographic texture gradients may develop in extruded profiles and rolled sheets of aluminium alloys. These texture gradients are often modelled using the crystal plasticity theory in order to predict strain localisation more accurately. In this work, an experimental and numerical study was carried out for a flat extruded profile with texture gradients made of the aluminium alloy AA6063. Uniaxial tension and plane-strain tension specimens were produced from this profile in two orthogonal material directions and heat treated to different tempers to study the role of crystallographic texture and work-hardening on strain localisation. The microstructure, including the orientation, morphology and position of the grains, was obtained from EBSD scans. The plane-strain tension tests were simulated using two crystal plasticity finite element models: the first represents accurately the measured microstructure, whereas the second one only represents correctly the global texture but not the texture gradients and grain morphology, i.e., the grain orientations are assigned randomly. In addition, a coarser model was used to identify the material parameters based on data from the plane-strain tension tests. The simulation results showed that accurate modelling of the microstructure did not influence the simulation results significantly. The model with the same global texture but with random assignment of grain orientations gave similar predictions for both the global stress-strain behaviour and the local deformation patterns.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.subjectCrystal plasticityen_US
dc.subjectTexture gradientsen_US
dc.subjectFinite element methoden_US
dc.subjectPlane-strain conditionsen_US
dc.subjectStrain localisationen_US
dc.titleTexture gradients and strain localisation in extruded aluminium profileen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionacceptedVersionen_US
dc.rights.holderThe Authors (post-print)en_US
dc.source.pagenumber239-255en_US
dc.source.volume97_98en_US
dc.source.journalInternational Journal of Solids and Structuresen_US
dc.identifier.doi10.1016/j.ijsolstr.2016.07.024
dc.identifier.cristin1400473
dc.relation.projectNorges forskningsråd: 237885en_US
cristin.unitcode7401,80,6,6
cristin.unitnameMaterial- og konstruksjonsmekanikk
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal