Vis enkel innførsel

Fibre reinforced lightweight aggregates

dc.contributor.authorBernhardt, Markus
dc.contributor.authorTellesbø, Hilde
dc.contributor.authorJustnes, Harald
dc.contributor.authorWiik, Kjell
dc.date.accessioned2017-10-31T08:32:24Z
dc.date.available2017-10-31T08:32:24Z
dc.date.created2013-12-12T14:24:30Z
dc.date.issued2014
dc.identifier.citationJournal of the European Ceramic Society. 2014, 34 (5), 1341-1351.nb_NO
dc.identifier.issn0955-2219
dc.identifier.urihttp://hdl.handle.net/11250/2463051
dc.description.abstractCarbon steel fibre reinforced lightweight aggregates (LWA) were produced in a pilot scale rotary kiln. Narrow size fractions as well as not-sieved (asreceived) material were investigated according to European standards with a main focus on strength and density and compared to a reference materialwithout fibres. Depending on the size of the pellets a fraction of the fibres oxidized during firing. A strength increase proportional to the amountof non-oxidized fibres within the pellet was observed. The crushing resistance for as received fibre reinforced pellets (bulk density 452 kg/m3) was3.0 MPa corresponding to an increase in strength of 140%. The enhanced strength was also confirmed by the single pellet compression test.nb_NO
dc.language.isoengnb_NO
dc.publisherScienceDirectnb_NO
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.subjectLightweight aggregatenb_NO
dc.subjectFibre reinforcementnb_NO
dc.subjectMechanical propertiesnb_NO
dc.subjectCrushing resistancenb_NO
dc.subjectStrengthnb_NO
dc.titleFibre reinforced lightweight aggregatesnb_NO
dc.typeJournal articlenb_NO
dc.typePeer reviewednb_NO
dc.description.versionacceptedVersionnb_NO
dc.rights.holder© Preprint version the authors. This is the authors' accepted manuscript to the article. The final publication is available at https://doi.org/10.1016/j.jeurceramsoc.2013.11.009nb_NO
dc.subject.nsiVDP::Technology: 500nb_NO
dc.source.pagenumber1341-1351nb_NO
dc.source.volume34nb_NO
dc.source.journalJournal of the European Ceramic Societynb_NO
dc.source.issue5nb_NO
dc.identifier.doi10.1016/j.jeurceramsoc.2013.11.009
dc.identifier.cristin1076039
cristin.unitcode7401,30,40,0
cristin.unitnameArkitektur, byggematerialer og konstruksjoner
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail
Filnavn:
forside-fiber-reinforced.pdf
Størrelse:
2.395Mb
Format:
PDF
Beskrivelse:
Acceptet manuscript; Fibre ...
Åpne

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal