• L-DOPA-Coated Manganese Oxide Nanoparticles as Dual MRI Contrast Agents and Drug-Delivery Vehicles 

      McDonagh, Birgitte Hjelmeland; Singh, Gurvinder; Hak, Sjoerd; Bandyopadhyay, Sulalit; Augestad, Ingrid Lovise; Peddis, Davide; Sandvig, Ioanna; Sandvig, Axel; Glomm, Wilhelm (Peer reviewed; Journal article, 2016)
      Manganese oxide nanoparticles (MONPs) are capable of time‐dependent magnetic resonance imaging contrast switching as well as releasing a surface‐bound drug. MONPs give T2/T2* contrast, but dissolve and release T1‐active ...
    • Lab Scale Experiments on Alumina Raft Formation 

      Gylver, Sindre Engzelius; Solheim, Asbjørn; Gudbrandsen, Henrik; Follo, Åste Hegglid; Einarsrud, Kristian Etienne (The Minerals, Metals & Materials Series;2367-1181, Chapter; Peer reviewed, 2020)
      During feeding of alumina into a Hall-Héroult cell, rafts floating on the bath surface may be formed. In this study, rafts were created in a laboratory furnace by adding 4 g secondary alumina in industrial bath. Samples ...
    • Laboratory investigations of moisture conditions in wood frame walls with wood fiber insulation 

      Geving, Stig; Lunde, Erik; Holme, Jonas (Journal article; Peer reviewed, 2015)
      The purpose of this study was to investigate the moisture conditions in wood frame walls with wood fiber thermal insulation in a Nordic climate. Laboratory measurements were conducted on 15 different wall configurations. ...
    • Laboratory scale study of reverse priming in aluminium filtration 

      Bao, Sarina; Syvertsen, Martin; Syvertsen, Freddy; Gihleengen, Britt Elin; Tundal, Ulf; Pettersen, Tanja (The Minerals, Metals & Materials Series;2367-1181, Peer reviewed; Journal article, 2019)
      Inclusions are one of the most serious problems encountered in aluminium production and melt treatment. Even small inclusions, not larger than a few tens of micrometres, can potentially have considerable consequences for ...
    • Laboratory test method to determine noise from wastewater installation 

      Conta, Simone; Homb, Anders (Chapter, 2022)
      We are working on a project which aims at improving sewage pipe material and piping system to reduce the radiated noise. One challenge we faced initially was to identify a suitable experimental method that fulfilled following ...
    • Laboratory test of Single Landmark registration method for ultrasound-based navigation in laparoscopy using an open-source platform 

      Perez de Frutos, Javier; Hofstad, Erlend Fagertun; Solberg, Ole Vegard; Tangen, Geir Arne; Lindseth, Frank; Langø, Thomas; Elle, Ole Jacob; Mårvik, Ronald (Journal article; Peer reviewed, 2018)
      Purpose Test the feasibility of the novel Single Landmark image-to-patient registration method for use in the operating room for future clinical trials. The algorithm is implemented in the open-source platform CustusX, a ...
    • Lack of transfer of skills after virtual reality simulator training with haptic feedback 

      Våpenstad, Cecilie; Hofstad, Erlend Fagertun; Bø, Lars Eirik; Kuhry, Esther; Johnsen, Gjermund; Mårvik, Ronald; Langø, Thomas; Hernes, Toril A. Nagelhus (Journal article; Peer reviewed, 2017)
    • LambdaRoad - Summarizing the main findings of work package 1: System and organizational requirements for CCAM" 

      Arnesen, Petter; Foss, Trond; Håkegård, Jan Erik; Hjelkrem, Odd Andre; Fagerholt, Randi Ann; Lie, Arne; Seter, Hanne (SINTEF rapport;2020:00884, Research report, 2020)
      This report isa collection of the memos written in work package 1 of the LambdaRoad project, where the overall project objectives is to study the need and requirements for electronic communication (ecom) in the future ...
    • Large bandgap insulating superior clay nanosheets 

      Pacáková, Barbara; Vullum, Per Erik; Kirch, Alexsandro; Breu, Josef; Miranda, Caetano Rodrigues; Fossum, Jon Otto (Peer reviewed; Journal article, 2022)
      One can find conductive, semiconducting, and insulating single nanosheets with unique electronic properties that are tied to their two-dimensional (2D) structure. Here, we report on wide-bandgap 2D insulator nanosheets ...
    • Large potentials for energy saving and greenhouse gas emission reductions from large-scale deployment of zero emission building technologies in a national building stock 

      Sandberg, Nina Holck; Næss, Jan Sandstad; Brattebø, Helge; Andresen, Inger; Gustavsen, Arild (Peer reviewed; Journal article, 2021)
      High energy and material demand in the building sector causes large greenhouse gas (GHG) emissions. This sector needs large-scale technological improvements in the transition to a future low-emission society. Extensive ...
    • Large scale experiments on high-rate three-phase low liquid loading flows 

      Kjølaas, Jørn; Unander, Tor Erling; Schümann, Heiner; Wolden, Marita; Holm, Henning (International Conference on Multiphase Technology;2019, Chapter; Peer reviewed, 2019)
      A comprehensive three-phase flow campaign, funded by Equinor as part of the Tanzania gas field development project [1] [2] [3], was carried out in the SINTEF Large Scale Loop at Tiller in 2017-2018. The experiments were ...
    • Large time step HLL and HLLC schemes 

      Prebeg, Marin; Flåtten, Tore Halsne; Müller, Bernhard (Journal article; Peer reviewed, 2018)
      We present Large Time Step (LTS) extensions of the Harten-Lax-van Leer (HLL) and Harten-Lax-van Leer-Contact (HLLC) schemes. Herein, LTS denotes a class of explicit methods stable for Courant numbers greater than one. The ...
    • Large Time Step Roe scheme for a common 1D two-fluid model 

      Prebeg, Marin; Flåtten, Tore; Müller, Bernhard (Peer reviewed; Journal article, 2017)
      We present the Large Time Step (LTS) extension of the Roe scheme and apply it to a standard two-fluid model. Herein, LTS denotes a class of explicit methods that are not limited by the CFL (Courant–Friedrichs–Lewy) condition, ...
    • Large-Scale Agile Transformation: A Case Study of Transforming Business, Development and Operations 

      Moe, Nils Brede; Mikalsen, Marius (Peer reviewed; Journal article, 2020)
      Today, product development organizations are adopting agile methods in units outside the software development unit, such as in sales, market, legal, operations working with the customer. This broader adoption of agile ...
    • Large-Scale Experimental Wind-Driven Rain Exposure Investigations of Building Integrated Photovoltaics 

      Breivik, Christer; Jelle, Bjørn Petter; Time, Berit; Holmberget, Øystein; Nygård, John Simen Seeberg; Bergheim, Einar; Dalehaug, Arvid (Journal article; Peer reviewed, 2013)
      Building integrated photovoltaics (BIPVs) are photovoltaic materials that replace conventional building materials in parts of the building envelopes, such as roofs or facades, i.e. the BIPV system serves dual purposes, as ...
    • Largescale hydrogen production in Norway - possible transition pathways towards 2050 

      Damman, Sigrid; Sandberg, Eli; Rosenberg, Eva; Pisciella, Paolo; Johansen, Ulf (SINTEF Rapport;2020:00179, Research report, 2020)
      The report presents a case study where qualitative research framed within transition studies and the multi-level perspective (MLP) is used to discuss the role Norwegian hydrogen production may play in sustainable energy ...
    • Laser Beam and Laser-Arc Hybrid Welding of Aluminium Alloys 

      Bunaziv, Ivan; Akselsen, Odd Magne; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik (Peer reviewed; Journal article, 2021)
      Aluminium alloys are widely used in many industries due to their high strength-to-weight ratios and resistance to corrosion. Due to their specific thermophysical properties and intricate physical metallurgy, these alloys ...
    • Laser welding of niobium to AISI 304 steel using a copper interlayer 

      Zhao, Jian; Shi, Mingxiao; Li, Yanjun; Ma, Xiang; Fang, Zhenxing; Yan, Hua (Peer reviewed; Journal article, 2020)
      Cu interlayers with thicknesses of 1, 1.5, and 2 mm were used to join niobium and AISI 304 steel. Fractures occurred in the weld, the Nb base metal, and the unmelted Cu interlayer when the Cu interlayer thickness was 1, ...
    • Laser-arc hybrid welding of 12- and 15-mm thick structural steel 

      Bunaziv, Ivan; Dørum, Cato; Nielsen, Steen Erik; Suikkanen, Pasi; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Akselsen, Odd Magne (Peer reviewed; Journal article, 2020)
      High-power lasers are very effective in welding of plates thicker than 10 mm due to the keyhole mode. High-power intensity generates a vapor-filled cavity which provides substantial penetration depth. Due to the narrow and ...