Blar i Publikasjoner fra CRIStin - SINTEF AS på tittel

Viser treff 3851-3870 av 5642

    • Practical control of dividing-wall columns 

      Strandberg, Jens; Skogestad, Sigurd; Halvorsen, Ivar J. (Chapter, 2010)

    • Practice makes the model: a critical review of stormwater green infrastructure modelling practice 

      Pons, Vincent Jean-Michel Thierry; Abdalla, Elhadi Mohsen Hassan; Tscheikner-Gratl, Franz; Alfredsen, Knut Tore; Sivertsen, Edvard; Bertrand-Krajewski, Jean-Luc; Muthanna, Tone Merete (Peer reviewed; Journal article, 2023)
      Green infrastructures (GIs) have in recent decades emerged as sustainable technologies for urban stormwater management, and numerous studies have been conducted to develop and improve hydrological models for GIs. This ...

    • Pre- and post-construction studies of conflicts between birds and wind turbines in coastal Norway (BirdWind). Report on findings 2007-2010 

      Bevanger, Kjetil Modolv; Berntsen, Finn Erik Harald; Clausen, Stig Morten; Dahl, Espen Lie; Flagstad, Øystein; Follestad, Arne; Halley, Duncan John; Hanssen, Frank Ole; Johnsen, Lars; Kvaløy, Pål; Lund-Hoel, Pernille*; May, Roelof Frans; Nygård, Torgeir; Pedersen, Hans-Christian; Reitan, Ole; Røskaft, Eivin; Steinheim, Yngve; Stokke, Bård Gunnar; Vang, Roald (NINA rapport;, Research report, 2011)
      The BirdWind project (2007-2010) is now concluded. This report summarises the main findings. Several scientific papers are in the process of preparation for publication in international peer re-view journals; this report ...

    • Precipitate/matrix incompatibilities related to the {111}Al Ω plates in an Al-Cu-Mg-Ag alloy 

      Gazizov, M.R.; Boev, A.O.; Marioara, Calin Daniel; Holmestad, Randi; Aksyonov, D.A.; Gazizova, M.Yu.; Kaibyshev, R.O. (Peer reviewed; Journal article, 2021)
      The atomic structure of Ω plates forming on {111}Al planes in an Al-Cu-Mg-Ag alloy has been investigated by Z-contrast atomic-resolution scanning transmission electron microscopy imaging and ab initio density functional ...

    • Precipitates in aluminium alloys 

      Andersen, Sigmund Jarle; Marioara, Calin Daniel; Friis, Jesper; Wenner, Sigurd; Holmestad, Randi (Peer reviewed; Journal article, 2018)
      Precipitation strengthening is a highly complex phenomenon on the nanoscale, responsible for providing strength in Al-Cu, Al-Mg-Cu, Al-Mg-Zn and Al-Mg-Si alloys. Advances in methodology, especially high-angle annular ...

    • Precipitation and strengthening modeling for disk-shaped particles in aluminum alloys: Size distribution considered 

      Li, Yue; Holmedal, Bjørn; Li, Hongxiang; Zhuang, Linzhong; Zhang, Jishan; Du, Qiang (Peer reviewed; Journal article, 2018)
      For an ICME (Integrated Computational Material Engineering) modeling framework used for the age-hardening aluminum alloy design and heat treatment parameters optimization, it is critical to take into account the geometric ...

    • Precipitation behavior in an Al-Cu-Mg-Si alloy during ageing 

      Gazizov, Marat; Marioara, Calin Daniel; Friis, Jesper; Wenner, Sigurd; Holmestad, Randi; Kaibyshev, Rustam (Journal article; Peer reviewed, 2019)
      The precipitation behavior and aging response of an Al-4.9Cu-0.74Mg-0.51Si-0.48Mn-0.1Cr-0.08Ti-0.02Fe (wt. %) alloy was examined in detail after aging at 170 °C with different dwell times up to 96 h. Deformation by ...

    • Precipitation in an A356 foundry alloy with Cu additions - A transmission electron microscopy study 

      Mørtsell, Eva Anne; Qian, Feng; Marioara, Calin Daniel; Li, Yanjun (Peer reviewed; Journal article, 2019)
      The influence of different Cu addition levels on the age hardening and precipitation behaviors in an Al356 foundry alloy during artificial aging treatment has been systematically studied. A detailed characterization of the ...

    • Precipitation in an extruded AA7003 aluminium alloy: Observations of 6xxx-type hardening phases 

      Lervik, Adrian; Marioara, Calin Daniel; Kadanik, Maria; Walmsley, John; Milkereit, Benjamin; Holmestad, Randi (Journal article; Peer reviewed, 2019)
      Precipitation behaviour in an industrially extruded AA7003 alloy has been studied using Transmission Electron Microscopy (TEM) together with Differential Scanning Calorimetry (DSC). Air Cooling (AC) after solution heat ...

    • Precipitation of Non-Spherical Particles in Aluminum Alloys Part I: Generalization of the Kampmann–Wagner Numerical Model 

      Holmedal, Bjørn; Osmundsen, Elisa; Du, Qiang (Peer reviewed; Journal article, 2015)
      Particles precipitated during aging treatments often have non-spherical shapes, e.g., needles or plates, while in the classical Kampmann–Wagner Numerical (KWN) precipitation model, it is assumed that the particles are of ...

    • Predicting crystal growth via a unified kinetic three-dimensional partition model 

      Anderson, Michael W; Gebbie-Rayet, James T.; Hill, Adam R.; Farida, Nani; Attfield, Martin P.; Cubillas, Pablo; Blatov, Vladislav A.; Proserpio, Davide M.; Akporiaye, Duncan; Arstad, Bjørnar; Gale, Julian D. (Peer reviewed; Journal article, 2017)
      Understanding and predicting crystal growth is fundamental to the control of functionality in modern materials. Despite investigations for more than one hundred years1,2,3,4,5, it is only recently that the molecular ...

    • Predicting diagnostic coding in hospitals: individual level effects of price incentives 

      Anthun, Kjartan Sarheim (Peer reviewed; Journal article, 2021)
      The purpose of this paper is to test if implicit price incentives infuence the diagnostic coding of hospital discharges. We estimate if the probability of being coded as a complicated patient was related to a specifc price ...

    • Predicting Near-Time Satellite Signal Attenuation at Ka-band Using Tropospheric Weather. 

      Grythe, Knut Harald; Bråten, Lars Erling; Rønning, Snorre Stavik; Tjelta, Terje (Chapter, 2018)
      There are satellite communication applications where it is desirable to predict near time (e.g. 2 to 12 h) propagation losses at Ka-band due to hydrometeor precipitation. We present results from a project investigating the ...

    • Predicting strain engineering strategies using iKS1317: a genome-scale metabolic model of Streptomyces coelicolor 

      Kumelj, Tjasa; Sulheim, Snorre; Wentzel, Alexander; Almaas, Eivind (Peer reviewed; Journal article, 2018)
      Streptomyces coelicolor is a model organism for the Actinobacteria, a phylum known to produce an extensive range of different bioactive compounds that include antibiotics currently used in the clinic. Biosynthetic gene ...

    • Predicting the Biological Effects of Human Salivary Gland Tumour Cells for Scanned 4He-, 12C-, 16O-, and 20Ne-Ion Beams Using an SOI Microdosimeter 

      Lee, Sung Hyun; Mizushima, Kota; Yonai, Shunsuke; Matsumoto, Shinnosuke; Mizuno, Hideyuki; Nakaji, Taku; Kohno, Ryosuke; Iwata, Yoshiyuki; Shirai, Toshiyuki; Pan, Vladimir; Kok, Angela; Povoli, Marco; Tran, Linh T.; Rosenfeld, Anatoly B.; Suzuki, Masao; Inaniwa, Taku (Peer reviewed; Journal article, 2022)
      Experimental microdosimetry along with the microdosimetric kinetic (MK) model can be utilized to predict the biological effects of ions. To predict the relative biological effectiveness (RBE) of ions and the survival ...

    • Prediction errors associated with sparse grid estimates of local atmospheric flows 

      Eidsvik, Karl Johan (Research report, 2006)
      Numerical simulations of geophysical flows have to be done on very sparse grids. This study show that moderately stratified flows can nevertheless be predicted usefully accurate. For better grids than about  ∆x1/H~0.5 ...

    • Prediction of cerebral perfusion pressure during carotid surgery – A computational fluid dynamics approach 

      Holmgren, Madelene; Holmlund, Petter; Støverud, Karen-Helene; Zarrinkoob, Laleh; Wåhlin, Anders; Malm, Jan; Eklund, Anders (Peer reviewed; Journal article, 2022)
      Background: Maintaining cerebral perfusion pressure in the brain when a carotid artery is closed during vascular surgery is critical for avoiding intraoperative hypoperfusion and risk of ischemic stroke. Here we propose ...

    • Prediction of DHW energy use in a hotel in Norway 

      Ivanko, Dmytro; Nord, Natasa; Sørensen, Åse Lekang; Sartori, Igor; Plesser, Thale Sofie Wester; Walnum, Harald Taxt (Journal article; Peer reviewed, 2019)
      Domestic hot water (DHW) systems are significant consumers of energy in buildings. This article is dedicated to hourly and daily DHW energy use modeling, with the aim of achieving energy savings in buildings. The methods ...

    • Prediction of guidewire-induced aortic deformations during EVAR: a finite element and in vitro study 

      Emendi, Monica; Støverud, Karen-Helene; Tangen, Geir Arne; Ulsaker, Håvard; Manstad-Hulaas, Frode; Di Giovanni, Pierluigi; Dahl, Sigrid Kaarstad; Langø, Thomas; Prot, Victorien Emile (Peer reviewed; Journal article, 2023)
      Introduction and aims: During an Endovascular Aneurysm Repair (EVAR) procedure a stiff guidewire is inserted from the iliac arteries. This induces significant deformations on the vasculature, thus, affecting the pre-operative ...

    • Prediction of solute diffusivity in Al assisted by first-principles molecular dynamics 

      Løvvik, Ole Martin; Sagvolden, Espen; Li, Yanjun (Peer reviewed; Journal article, 2014)
      Ab initio calculations of the solid-state diffusivity of solute atoms in bulk aluminium have previously been based on transition state theory (TST), employing transition state searches and systematic assessments of single ...