Blar i SINTEF Industri på tittel
Viser treff 739-758 av 1484
-
The influence of parent austenite characteristics on the intervariant boundary network in a lath martensitic steel
(Peer reviewed; Journal article, 2022)The influence of the parent austenite deformation state on the intervariant boundary network (i.e., population, plane orientation, and connectivity) of a lath martensitic microstructure was investigated using conventional ... -
Influence of strain rate and temperature on the mechanical behaviour of rubber-modified polypropylene and cross-linked polyethylene
(Journal article; Peer reviewed, 2017) -
Influence of substitution of water by organic solvents in amine solutions on absorption of CO2
(Peer reviewed; Journal article, 2018)Aqueous amine solutions are the most used solvents for chemical absorption of CO2. Substituting part of the water by organic solvents in aqueous amine solutions aims to take advantage of the lower partial pressure and ... -
Influence of temperature during pyrolysis of Fe-alginate: Unraveling the pathway towards highly active Fe/C catalysts
(Peer reviewed; Journal article, 2022)Transition metals supported on carbons play an important role in catalysis and energy storage. By pyrolysis of metal alginate, highly active catalysts for the Fischer-Tropsch synthesis (FTS) can be produced. However, the ... -
Influence of Weight-on-Bit on Percussive Drilling Performance
(Peer reviewed; Journal article, 2020)A phenomenological model for percussive drilling systems is proposed in this paper to explain the experimentally demonstrated existence of an optimal weight-on-bit (WOB), for which the rate of penetration (ROP) is maximized. ... -
The Influences of Grain Refiner, Inclusion Level, and Filter Grade on the Filtration Performance of Aluminum Melt
(Peer reviewed; Journal article, 2021)The addition of grain refiner particles in the aluminum melt is known to reduce the filtration efficiency of ceramic foam filter (CFF). In the present work, a systematic study on the influence of the addition level of ... -
Inherent safety of clean fuels for maritime transport
(Peer reviewed; Journal article, 2023)The urgent need to reduce the emission of harmful pollutants in maritime transport promoted the development of several alternative propulsion systems based on clean fuels or carbon-neutral energy vectors. However, the ... -
Inhibition of metal dusting corrosion on Fe-based alloy by combined near surface severe plastic deformation (NS-SPD) and thermochemical treatment
(Peer reviewed; Journal article, 2021)Combined NS-SPD and thermochemical treatment has been used to improve the metal dusting corrosion resistance of Incoloy 800. After testing under infinite carbon activity for 20−100 h, carbon was not found in the NS-SPD ... -
Innovation in a heterogeneous CCS research centre, managerial and organizational challenges
(Peer reviewed; Journal article, 2012)Recently, the Norwegian authorities have established a number of Centres for Environment-friendly Energy Research (CEER), intended to develop new knowledge, foster breakthrough technology and promote innovation in order ... -
Innovative Process Cycle with Zeolite (MS13X) for Post Combustion Adsorption
(Peer reviewed; Journal article, 2017)This paper reports the integration of Electric swing adsorption (ESA) Process in a Natural Gas Combined Cycle. This process was investigated in the MATESA FP7 project financed by European Commission. The ESA process is ... -
Inside the electrode: Looking at cycling products in Li/O2 batteries
(Journal article; Peer reviewed, 2019)This work investigates the impact of electrochemical reactions and products on discharge capacity and cycling stability with electrolytes based on two common solvents – tetraethylene glycol dimethyl ether (TEGDME) and ... -
Integration of chemical looping combustion for cost-effective CO2 capture from state-of-the-art natural gas combined cycles
(Peer reviewed; Journal article, 2020)Chemical looping combustion (CLC) is a promising method for power production with integrated CO2 capture with almost no direct energy penalty. When integrated into a natural gas combined cycle (NGCC) plant, however, CLC ... -
Integration of gas switching combustion and membrane reactors for exceeding 50% efficiency in flexible IGCC plants with near-zero CO2 emissions
(Peer reviewed; Journal article, 2020)Thermal power plants face substantial challenges to remain competitive in energy systems with high shares of variable renewables, especially inflexible integrated gasification combined cycles (IGCC). This study addresses ... -
An intelligent framework for forecasting and investigating corrosion in marine conditions using time sensor data
(Peer reviewed; Journal article, 2023)Corrosion of marine steel structures can be regarded as a time-dependent process that might result in critical strength loss and, eventually, failures. The availability of reliable forecasting models for corrosion would ... -
Interaction of hydrogen with flat (0001) and corrugated (11–20) and (10–12) cobalt surfaces: Insights from experiment and theory
(Peer reviewed; Journal article, 2019)Cobalt catalysts are used on a commercial scale to produce synthetic fuels via the Fischer-Tropsch synthesis process. As adsorbed hydrogen atoms are involved in many of the elementary reaction steps that occur on the ... -
The Interactions Between Oxide Film Inclusions and Inoculation Particles TiB2 in Aluminum Melt
(Peer reviewed; Journal article, 2021)In this work, a systematic study on the interactions between aluminum oxide films and TiB2 grain refiner particles and their effect on grain refinement behavior have been conducted. Oxide f ilms were introduced into a ... -
Interface phenomena in magnetron sputtered Cu2O/ZnO heterostructures
(Peer reviewed; Journal article, 2017)The interface between ZnO and Cu2O has been predicted to be a good candidate for use in thin film solar cells. However, the high predicted conversion efficiency has yet to be fully realized experimentally. To explore the ... -
Interfacial Behaviour in Ferroalloys: The Influence of Sulfur in FeMn and SiMn Systems
(Peer reviewed; Journal article, 2021)The present study has investigated the influence of sulfur content in synthetic FeMn and SiMn from 0 to 1.00 wt pct on interfacial properties between these ferroalloys and slags. The effect of experimental parameters such ... -
Interfacial characterization of Al-Al thermocompression bonds
(Journal article; Peer reviewed, 2016)Interfaces formed by Al-Al thermocompression bonding were studied by the transmission electron microscopy. Si wafer pairs having patterned bonding frames were bonded using Al films deposited on Si or SiO2 as intermediate ... -
Interfacial microstructure and mechanical properties of Ti−6Al−4V/Al7050 joints fabricated using the insert molding method
(Peer reviewed; Journal article, 2017)Ti−6Al−4V/Al7050 joints were fabricated by a method of insert molding and corresponding interfacial microstructure and mechanical properties were investigated. The interfacial thickness was sensitive to holding temperature ...